SoG Grow Room Discussion

LionsRoor

Well-Known Member
gonna run the drain similar to nft style no progression
i cant run hydroton rocks cause i need to slice my net pot bottoms
and i just got back from the hydro shop was about to buy the 3" neoprane collars
but they wont work with the AF 3" cause they have 1/4 " slot in them
its not like the ez clone collars, i have to make them myself
Yeah - that's why I asked - I didn't think there was a 3" starter collar - or anything that small, other than the 2" and smaller
net cups. I'll have to see how you make them...?

your design looks choice, well done bra!
that's exactly how i'd to do my next cloner
the spacing sucks on the ez 120 or any of them for that matter
yours looks like u got plenty room to go around and u can fit the 2" netpot, that's just sweet
love the bottom res, wouldn't do it any other way
Thanks!
as for GH drilling u 2" holes, dont bet on it; i tried to get them
they come pre drilled now from Europe, no more custom drilling
Damn. Botanicare will drill me the 2" for their AeroJet - but I'm not sure how well those work? I can't find a grow journal utilizing one? Anybody? The spray assembly looks choice but the drainage may not be sufficient??? Do the roots clog the drain pipe? At 42" long, the trays are kind of short too.
 

sparat1k

Well-Known Member
Do you get condensation buildup on ur air chiller? What type of filter is that? Is that a 10inch canfan? Can't wait for round 2! :-)
 

SOG

Well-Known Member
Do you get condensation buildup on ur air chiller? What type of filter is that? Is that a 10inch canfan? Can't wait for round 2! :-)

wassup sparat1k
no condensation what so ever on my CoolBox (12" Venti model in the pic)
its a FanMax 10 on top of MountainAir 40" x 14" Carbon filter
 

GanjaAL

Active Member
Hey SOG... was wondering what you are using for chilling your rez??? I was thinking of using the boost bottles but someone was telling me that it is not good for the soup.
 

sparat1k

Well-Known Member
wassup sparat1k
no condensation what so ever on my CoolBox (12" Venti model in the pic)
its a FanMax 10 on top of MountainAir 40" x 14" Carbon filter
Hey, thanks for hitting me back.

Why did you ditch the cool tubes? Isn't it bout to warm up?
 

jberry

Well-Known Member
cool tubes arent good for distributing light efficiently imo....

-wut up soggy? hows your cool box deal going? are you or your gear gunna be at the s.f. expo again this year? hope so!
 

SOG

Well-Known Member
Why did you ditch the cool tubes? Isn't it bout to warm up?
i also ditched the tent in case you didn't notice :lol:
it seemed pointless to me to run the tubes without the tent
im cooling the whole room now, instead running the tubes into the CoolBox
im having it scrub the whole room air, work great so far
the fan attached to the carbon filter runs 24/7
the pump that circulate the cold water from the chilled res behind the wall
triggers on when my secondary AC kicks in

-wut up soggy? hows your cool box deal going? are you or your gear gunna be at the s.f. expo again this year? hope so!
wassup brother J
donno yet if ill make it to the show this year myself
working on being represented, same as last year :bigjoint:
 

greenthumb111

Well-Known Member
i also ditched the tent in case you didn't notice :lol:
it seemed pointless to me to run the tubes without the tent
im cooling the whole room now, instead running the tubes into the CoolBox
im having it scrub the whole room air, work great so far
the fan attached to the carbon filter runs 24/7
the pump that circulate the cold water from the chilled res behind the wall
triggers on when my secondary AC kicks in



wassup brother J
donno yet if ill make it to the show this year myself
working on being represented, same as last year :bigjoint:
Hey SOG

Where are all those sick elite cuts you listed? The new setup looks great but I always wondered if those holes were too close but then again I dont do indo . . . yet, lol. If I ever do an indoor setup, I want to get one of those little radiators for my cooling sys. I need to get my butt in gear and start my grow.

LR your shit is looking good too!
 

Hulk Nugs

Well-Known Member
Do you have a maid ??? looks to clean in there :lol:, thats how it supposed to look, great job :!:

Everyone looks healthy as can be gotta enjoy lookingg at them:-P

whats going on with the mutants in the ebbaflow? old mothers ?
 

Hulk Nugs

Well-Known Member
awww bonsai very nice.

always wanted to try that since i was young and watched karate kid.

will you ever flower them?

they should have a root ball that fills that hole pot up, if they been around while.
 

Bob Smith

Well-Known Member
Yeah - that's why I asked - I didn't think there was a 3" starter collar - or anything that small, other than the 2" and smaller
net cups. I'll have to see how you make them...?


Thanks!

Damn. Botanicare will drill me the 2" for their AeroJet - but I'm not sure how well those work? I can't find a grow journal utilizing one? Anybody? The spray assembly looks choice but the drainage may not be sufficient??? Do the roots clog the drain pipe? At 42" long, the trays are kind of short too.
SOG, you grow room is so clean and well organized that it really makes me nauseous :cuss:

Great looking setup, my friend.

Now a quickie thread jack - Lion, where did you get that Botanicare tray lid? Does it fit their standard 2x4 tray? The one that's about 24" by 44" (no, not 48", which I didn't know until buying a couple).

Thanks so much to both of you.

EDIT: nevermind, found them online - have they always offered these? I've never seen them before.......
 

SOG

Well-Known Member
will you ever flower them?
i keep the bonsai moms for my genetics bank,
i let them run off when i need cuts off them then trim back to two leafs per stalk
few years down the road when they will be flowered, the rockwool will be trimmed down to fit a 3" net pot; then rock and roll
and yea the root will get cut off in the process and rejuvenate back in short veg period


have they always offered these? I've never seen them before.......
ty bra, yes they always offered these
they have a unit that uses this lid and daisy chains up to 4 of these units with one res

 

sparat1k

Well-Known Member
im cooling the whole room now, instead running the tubes into the CoolBox
sorry for all the q's SOG, not many grows like yours kiss-ass

you mind giving me a little insight to the temps of the chiller, ambient air, the air coming out of the airbox?

i'm debating whether i build a custom unit like yours or if i buy the hydroinnovations 8" icebox.
 

GanjaAL

Active Member
Or you can get his... he has a venti model out and it should soon be readily available. That will be my next purchase.
 

greenthumb111

Well-Known Member
Or you can get his... he has a venti model out and it should soon be readily available. That will be my next purchase.
Dynomite SOG! Im glad you have mothers for cuts. I will ask you about what strains you retain after this flower season. If you want any of mine let me know.
 

valais

Active Member
I just spent the last 5-6 hours reading over your log and posts. It is truly impressive! What a wealth of information. I plan to re-read over most of your work tonight. I would just like to thank you for providing a very a well documented grow.
Cheers
 
Top