The French Cannoli` Hash Thread

Rider509

Well-Known Member
Just a note: NOTHING will help the crap in the bottom jar! LOL. I think it's mostly pulverized plant material.
 

HashMan11

Member
Hello guys I'm new around, I introduced my self already but I wanted this thread to be the first I write in. I'm reading this thread for a few months now, I love it and want to share with you some of the stuff I do. I like this thread because there is knowledge and lot of respect.
I am mainly doing bubble but I also play around with sift sometimes.
My technique is a mix based on what I learned during years a mix of lots of run with lots of people... I kept gathering lots of very little details and learned a lot.
I have to say that I press, I always pressed the hash since I experienced that it didn't smoke the same way. I run with 190 160 120 70 45. Depending on first rounds I take out de 70 or 120 or both. I make short runs and add more or less water and ice depending on how I feel it. No 220 bag in machine and the hose is costume 4 cm diameter. I have tried a few bags but never bolt or Ice extract. I like to work dry material because of the control. I don't like microplane though it's the best zester but naturally hash is not made to run through bags with water being fresh so you I need it sometime on some fresh material. I had one chance to go to Frenchys class but I couldn't do it, next time I will go for sure. I'm gonna post some pics just have to figure out how. Chears
 

HashMan11

Member
I think it's posted. It was actually 5 pulls of 73 and 3 more that I gathered in the 45. After little hand press I ended mixing all 8 pulls. Taste great but I not my favorite type of strain, neither the grower push it to the limit so very average. The press is pretty impressive I will post later. Sorry for my vocabulary, English isnot my first language
 

natureboygrower

Well-Known Member
I think it's posted. It was actually 5 pulls of 73 and 3 more that I gathered in the 45. After little hand press I ended mixing all 8 pulls. Taste great but I not my favorite type of strain, neither the grower push it to the limit so very average. The press is pretty impressive I will post later. Sorry for my vocabulary, English isnot my first language
looks really nice,bro.hope you post some more pics.your english is fine bro,don't even worry about that.
 

HashMan11

Member
Thx natureboygrower. Few days ago I ran a batch of trim from a friend, it was frozen in a block freshly trimmed :wall:i was gonna shoot myself, great material super terpy but frozen and I hate it when people freeze the material, but know I told him to dry it out a few days and bring it :joint:
So there goes a Pic, Its still drying in the office but I couldn't stop my self from taking a little bit for a first joint. I believe in a few more days it will be very good. I'll post more. This is a little from the to grades I made 120 160 and 120 to 45, so let's call it full spectrum bongsmilie
Edit: it's candy kush, really amazing trrp
 

Attachments

Last edited:

Bigboiii420

New Member
Hello guys I'm a brand new member and I've come here for help and to learn how to make good bubble hash(only one I really know) I enjoy smoking hash a lot but it's very hard to come by in the east coast. I was able to learn good info about the agitating process on one of frenchies YouTube videos. But unfortunately I haven't been able to find much on the drying process. What I would like to know is once I have my yield and I've finishing all my washes what do i do from there. Help would be very appreciated thank you
 

littlejacob

Well-Known Member
Hello guys I'm a brand new member and I've come here for help and to learn how to make good bubble hash(only one I really know) I enjoy smoking hash a lot but it's very hard to come by in the east coast. I was able to learn good info about the agitating process on one of frenchies YouTube videos. But unfortunately I haven't been able to find much on the drying process. What I would like to know is once I have my yield and I've finishing all my washes what do i do from there. Help would be very appreciated thank you
Hi! You are right there is not a lot of information about his drying process...i guess it is a fabrication secret!!! I guess it is depend on what do you use...fresh or cured buds and trim or both! If you make live resin you will need to dry and cure the final product but with cured material you will need only to dry it! I never made live resin but I am pretty sure you need to cure it for a moment like for buds! About temperature or hydro you need to cure the hash I would say the same as curing buds!
I am a big fan of Frenchy maybe because I am one too but I will try his products one day...maybe this year if he go to Spanabis!!!
Have a lifted one and lots of good vibes from France
 

Azubaz

Well-Known Member
This may be somewhat dead, but i roll my IWE for maybe 15 min with a hot bottle, then roll between my hands for maybe 5 min until i get a nice some what shiny ball. My problem is after letting it cure for maybe a couple weeks, it's almost hard as a rock and really dry. Is thia normal for most hash? I see frenchys hash and his is very waxy like as he mentions. I wanna make sure i get the most quality so any tips would help
 

rasna

Well-Known Member
I have a plant grown outside that has had rottenness... I collected it by cutting and throwing the rotten sprout into the garbage the rest I froze it

the gems are very very resinous, I would regret not using all this resin...

anyway returning to the bubble hash I wanted to proceed in this way, the suggestions are welcome

two buckets, a large one for example 20 liters and a smaller one of 10 liters which I will insert in the big bucket and in which I will go to work the plant material;
in the space left at the edges and at the bottom of the large bucket I will put the ice in such a way as to keep the inner work bucket at an optimal temperature,

then I will pass the liquid in the bubble bags

once the plant material is processed, do I have to wait to see if it will start to float mold and various crap before filtering the plant material with the 250-190 bag?

some advice?
 
Hi,

First up great thread quite long, thanks to all who are sharing their knowledge here.

I have a condition that gives me more sysmptoms than I care to think of.

I would be looking to make my own dry sift so I can extract and make Green Drangon with it.

I will be using high CBD strains, Hight THC strains and 1:1 and possiblly some 1:2 stains.

Where I live they don't like us using cannibis of any kind :( so it's up to me to make my own medicine.

I have had a look through some of the post but would some kind soul point me to a post that will give me a step by step process please. Lyme affects my ability to concentrate and read through hundreds of posts.

What equipment will I need i'm on a budget. I've watched FC video on washing hash but I' am not in a position to do the cold waster stuff.

I won't need to press or cure or anything like that as I will be doing the decarb of the kief in the GD process.

I plan on using dry cured flower and trim as I don't smoke or vape at all.

I'll say thanks in advance and hope I can give back and contribute in the future once I have some experience.
 
Welcome to Roll It Up @myinvisiblecomplication -- Would a dry ice hash work? It is easy and requires very little in the way of equipment. Basically you need the bags, a bucket and dry ice. The bags were the most expensive part. Lots of stores near me carry dry ice.

I bought these bags:
https://www.amazon.com/dp/B00W31HX68/ref=cm_sw_em_r_mt_dp_U_u6.ZDbG5X5703

I would have too look to see if I can buy dry ice and how much it is. I'm not in the states so things can be harder to source. I'm sure its around I just have to find it.

I'll also have to try and find some bags too wouldn't buy from amazon and have it go through customs.

That stuff I can find myself more looking at the methods I need to use. dry ice procedure or dry sift etc...

Is there a tutorial or thread or some posts somehwere with pics?

Thanks
 

Seems simple enough that way.

Are most people in this thread who are dry sifting using these methods and those micron bags? I ask because those bags where i am are extremely expensive like $300 which is too expensive
 

inDC4now

Well-Known Member
Seems simple enough that way.

Are most people in this thread who are dry sifting using these methods and those micron bags? I ask because those bags where i am are extremely expensive like $300 which is too expensive
Amazon quotes $33.99 US with free shipping for that set of bags. Surely not worth $300
 
Top