The Yorkshireman
Well-Known Member
Proof of jet fuel and fire not being responsible.
Jetfuel specs, source....STATOIL.
http://www.statoilaviation.com/en_EN/pg1332347009500/ar1334072083204/statoilAviation/fuel_jeta1.html
Typical physical properties for Jet A-1 fuel:
Flash point 42 °C
Auto ignition temperature 210 °C (410 °F)
Freezing point -47 °C (-52.6 °F)
*Open air burning temperatures 260-315 °C (500-599 °F)* (WTC fires never even got this hot)
Density at 15 °C (59 °F).804 kg/L
Specific energy 43.15 MJ/kg
Energy density 34.7 MJ/L
In a "controlled burn" (where oxygen and fuel are regulated in an optimal mix), jet fuel will reach a maximum temperature of 982C (1800F).
Regular steel is rated @ around 1100C before it melts properly.
The WTC steel was certified by Underwriters Laboratories Inc to ASTM E119 standards.
UL executive Kevin Ryan called bullshit and got fired.
Kevins email......
http://911review.com/articles/ryan/letter.html
Jet fuel/fire/explosion was not responsible for the collapse of the WTC's and building 7 on 9/11, 100% scientific fact.
Jetfuel specs, source....STATOIL.
http://www.statoilaviation.com/en_EN/pg1332347009500/ar1334072083204/statoilAviation/fuel_jeta1.html
Typical physical properties for Jet A-1 fuel:
Flash point 42 °C
Auto ignition temperature 210 °C (410 °F)
Freezing point -47 °C (-52.6 °F)
*Open air burning temperatures 260-315 °C (500-599 °F)* (WTC fires never even got this hot)
Density at 15 °C (59 °F).804 kg/L
Specific energy 43.15 MJ/kg
Energy density 34.7 MJ/L
In a "controlled burn" (where oxygen and fuel are regulated in an optimal mix), jet fuel will reach a maximum temperature of 982C (1800F).
Regular steel is rated @ around 1100C before it melts properly.
The WTC steel was certified by Underwriters Laboratories Inc to ASTM E119 standards.
UL executive Kevin Ryan called bullshit and got fired.
Kevins email......
http://911review.com/articles/ryan/letter.html
Jet fuel/fire/explosion was not responsible for the collapse of the WTC's and building 7 on 9/11, 100% scientific fact.
Last edited: