Tobacco

Voodu

Well-Known Member
Im growing a few different strains of tobacco for the first time this year. I started the germination process and have them set up in my indoor nursery during the evening and in my greenhouse during the day. I know the growing of the plants is going to be the easy part, since the curing and fermentation is time consuming and Im going to have to construct a small kiln. Im excited to see this through, since I enjoy some tobacco leaf in my joints. I'm growing some virgina gold, Aztec wild, and a couple others.
Anyone else try growing and curing their own tobacco?
 

BarnBuster

Virtually Unknown Member
 

Puff_Dragon

Well-Known Member
HEY NOW! My Tobacco growing brethren! Thanks for the links.
Its good to see Tobacco prices (and perhaps, a touch of 'that virus of *unspecified origin*' ;-) ..has brought you to 'the Dark Side' too ;-)
My first year growing as well.

I have one Cuban/Havana cigar plant, one Red Cherry and one Black Mammoth (BM, is supposed to be a very light, great smoke).
All are about two months old now.
I have them in 12-15 liter (roughly) pots. Interested to see how potting them effects size (etc).
Fed them a standard spec fertiliser. But, also added some Mighty Mite Seaweed (kelp) solution, BioBizz Grow and BioBizz Fish mix. These last three for good soil activity and the usual beneficials.

So far (in the South of the uk), the Cuban and the Black Mammoth have had no issues ..save some minor slug/pest attacks.
The great thing, any little flying pests that try to attack them ..get overwhelmed (and die) from the nicotine. They are left hanging (dead) from the leaves in droves!
After only growing other 'weeds' ..THIS is a GLORIOUS turn of events for my growing history!
Makes me wonder, if its a good companion growing plant (might clear some of the pests during a grow).

The Red Cherry, is growing the worst.
It is drooping all over the place (not just when there is intense sun) and shows signs its got a virus from some pest biting it.
Whatever, it looks the worst for wear.

I decided to therefore give them (all) a mild hit of the systemic acetamiprid insecticide (using the product Bug Clear Ultra Concentrate).
To see if that would deter the slugs etc.
Later ...the irony of spraying a neonicotinoid on a *Tobacco* plant hit me :)
Thankfully, it was a very mild dosage anyway.

Getting some slug pellets. And, have already wrapped some Copper electrical insulation tape around the plant pots (much cheaper than buying the copper tape marketed specifically for this). Apparently, this deters the slugs.
All plants are staked, to help them grow.


Black Mammoth:

Black Mammoth 1.jpg


Black Mammoth 2.jpg



Cuban cigar plant

Cuban-Havana Cigar Plant 1.jpg

Cuban-Havana Cigar Plant 2.jpg




Red Cherry ..even the statue feels sorry for it!

Red Cherry - Droopy and ill 1.jpg


Some browning on one of the lower leafs. Methinks, some nefarious beast has infected my baby.
Red Cherry - Droopy and ill 2.jpg

*Note: Groovy size 12 'garden sandals' added for scale*



Seen on all Tobacco plants: Fly genocide! What a loverly sight

Flying pests - you die.jpg
 

xtsho

Well-Known Member
Dammit! Now I'm looking at tobacco seeds online. I don't need more plants to grow. I quit smoking cigarettes years ago. Well I do indulge in the occasional single cigarette sometimes if someone comes over that smokes. But I think it would be cool to try and roll my own cigars which I still enjoy from time to time.

Anyone know anything about this seed site?

 

BarnBuster

Virtually Unknown Member
Dammit! Now I'm looking at tobacco seeds online. I don't need more plants to grow. I quit smoking cigarettes years ago. Well I do indulge in the occasional single cigarette sometimes if someone comes over that smokes. But I think it would be cool to try and roll my own cigars which I still enjoy from time to time.

Anyone know anything about this seed site?

Don't know about them but these I've got various other seeds from before and they have tobacco selection(s).

https://www.jlhudsonseeds.net/SeedlistN.htm
 

DCcan

Well-Known Member
Dammit! Now I'm looking at tobacco seeds online. I don't need more plants to grow. I quit smoking cigarettes years ago. Well I do indulge in the occasional single cigarette sometimes if someone comes over that smokes. But I think it would be cool to try and roll my own cigars which I still enjoy from time to time.

Anyone know anything about this seed site?

I'm not familiar with the site, but I'm familiar with some of the tobaccos.

Maryland Catterton is a good for cigars. It's smooth with a light flue cure. Havana Leaf is another good plant.
Virginia Redleaf with a light Cavendish cure has a deep flavor, blend with Brightleaf for cigarettes.

I just found my semi-wild tobacco coming back, there's probably more in the hay field.
IMG_0721.JPG
 

DCcan

Well-Known Member
Some browning on one of the lower leafs. Methinks, some nefarious beast has infected my baby.
That one definitely should be culled or moved far away. The lower leaf is collapsing and turning off color, they are susceptible to soil pathogens.
Cut the bottom leaves, put a tomato cage around them to keep the leaves from touching the ground, the leaves don't like nute splash either, low phytotoxicity levels.

Hail storms suck too, and there are several enormous caterpillars, several minor ones that can eat nicotine or tomatoes by the barrel around here.
Some BTk works for them, but it looks like a rabbit attack from all the missing leaves and poo.
 

Puff_Dragon

Well-Known Member
That one definitely should be culled or moved far away. The lower leaf is collapsing and turning off color, they are susceptible to soil pathogens.
Cut the bottom leaves, put a tomato cage around them to keep the leaves from touching the ground, the leaves don't like nute splash either, low phytotoxicity levels.

Hail storms suck too, and there are several enormous caterpillars, several minor ones that can eat nicotine or tomatoes by the barrel around here.
Some BTk works for them, but it looks like a rabbit attack from all the missing leaves and poo.
Thanks for the tips! (*and thanks everyone for the links*)
I'll cull that leaf off then (what ever the cause of the browning). Soil pathogen, nute splash ..are possible :)
I was going to let the Cuban and Black Mammoth plants grow flowers (for seeds).
But, I'm topping the red cherry (its the weakest and I can then see what topping does :)

fyi -
I cheated (didn't grow from seed). Instead, I bought plug plants from a UK tobacco site:
www.uktobaccoplants.co.uk
 

Puff_Dragon

Well-Known Member
Im growing a few different strains of tobacco for the first time this year. I started the germination process and have them set up in my indoor nursery during the evening and in my greenhouse during the day. I know the growing of the plants is going to be the easy part, since the curing and fermentation is time consuming and Im going to have to construct a small kiln. Im excited to see this through, since I enjoy some tobacco leaf in my joints. I'm growing some virgina gold, Aztec wild, and a couple others.
Anyone else try growing and curing their own tobacco?
fyi - I've been googling curing and fermenting techniques.
Interesting to note, but maybe just urban myths:
kiln drying; might originate where barns (storing air drying tobacco leafs) caught fire. The recovered, dried leaves, smoked better than standard sun dried leafs. Kiln drying then evolved

Fermenting;
stories say it derived from when cured tobacco leaf was pressed into barrels and shipped across sea (in moist ship holds). After shipping, people found it smoked better (as it had fermented while shipping). After learning this, more advanced techniques then grew in the grower countries.

I also found myself relating Tobacco fermenting to the Cobbing process (seen elsewhere on this site).
After more searching online:
Some people are quick fermenting their cured tobacco by;
Filling a small wooden box (no lid) with cured and shredded tobacco leaf (must be slightly moistened).
Then, a piece of wood (that fits the inner dimensions of the box) is placed onto the tobacco/box.
Using a g-clamp/press, tightly compact the tobacco in the box (apparently, this compression speeds up the process).

I've watched a video with people saying only 24 hrs is needed, under compression. I won't vouch for that, but the technique seemed interesting.
Down the line, I might investigate my own hybrid of this, cobbing and standard tobacco fermenting techniques.

ps:
Water fermenting, with the tobacco leafs vac sealed in a bag and then placed underwater in a hot water bath ..was another interesting technique
I noticed people trying. Reminded me a little of Water Curing techniques mentioned elsewhere on this site :)

Peace.
 

Puff_Dragon

Well-Known Member
Well I started to hang/air dry some leaves from the plants.
One bunch is almost dried. With another bunch just starting to dry.

fyi -If you put a rubber band (or hair tie) around the string (where it is attached to the leaf). Then this will keep the string attached to the leaves as they shrink from drying (no leafs will fall out the string as they dry :)

After looking at tobacco cutters/shredders; while the 'true' tobacco shedders seemed good ..they were expensive (especially for a novice grower).
There were cheap and nasty Chinese ones too (£12 on eBay).
However, I settled on buying a £20 Paste machine! The 'fine' pasta shredder slot, does a pretty good approximation of the true tobacco shredders.
You can find these paste making machines on eBay+Amazon (they are crank operated). Go for an all steel one (with steel cutting blades).

Peace.


Drying Pics:

One day hanging/drying
IMAG0928.jpg

IMAG0929.jpg


Nearly dried bunch (approx. 9 days)
IMAG0934.jpg
 

insomnia65

Well-Known Member
Well I started to hang/air dry some leaves from the plants.
One bunch is almost dried. With another bunch just starting to dry.

fyi -If you put a rubber band (or hair tie) around the string (where it is attached to the leaf). Then this will keep the string attached to the leaves as they shrink from drying (no leafs will fall out the string as they dry :)

After looking at tobacco cutters/shredders; while the 'true' tobacco shedders seemed good ..they were expensive (especially for a novice grower).
There were cheap and nasty Chinese ones too (£12 on eBay).
However, I settled on buying a £20 Paste machine! The 'fine' pasta shredder slot, does a pretty good approximation of the true tobacco shredders.
You can find these paste making machines on eBay+Amazon (they are crank operated). Go for an all steel one (with steel cutting blades).

Peace.


Drying Pics:

One day hanging/drying
View attachment 4940734

View attachment 4940735


Nearly dried bunch (approx. 9 days)
View attachment 4940736
Nice, looking good mate.
 

xtsho

Well-Known Member
Well I started to hang/air dry some leaves from the plants.
One bunch is almost dried. With another bunch just starting to dry.

fyi -If you put a rubber band (or hair tie) around the string (where it is attached to the leaf). Then this will keep the string attached to the leaves as they shrink from drying (no leafs will fall out the string as they dry :)

After looking at tobacco cutters/shredders; while the 'true' tobacco shedders seemed good ..they were expensive (especially for a novice grower).
There were cheap and nasty Chinese ones too (£12 on eBay).
However, I settled on buying a £20 Paste machine! The 'fine' pasta shredder slot, does a pretty good approximation of the true tobacco shredders.
You can find these paste making machines on eBay+Amazon (they are crank operated). Go for an all steel one (with steel cutting blades).

Peace.


Drying Pics:

One day hanging/drying
View attachment 4940734

View attachment 4940735


Nearly dried bunch (approx. 9 days)
View attachment 4940736
That's interesting using a pasta machine. I don't see why it wouldn't work. I have a couple myself. My Marcato has a motor I can attach as well. Those dedicated tobacco shredders are basically the same thing and you pay a premium because they're tobacco specific.

Looks like you aren't the first one to think of using a pasta machine to shred tobacco.

 

Puff_Dragon

Well-Known Member
This is what I have, same model. It was in the attic for the last hundred years, works great
That looks awesome. They certainly knew how to build 'tough' back then. That thing could be working happily hundreds of years from now :)
Out of interest, looking at it; is it a single guillotine blade? (cutting downwards). If so, it might be a cutter more designed for block tobacco cutting ..as opposed to dried leaf.
 

Puff_Dragon

Well-Known Member
That's interesting using a pasta machine. I don't see why it wouldn't work. I have a couple myself. My Marcato has a motor I can attach as well. Those dedicated tobacco shredders are basically the same thing and you pay a premium because they're tobacco specific.

Looks like you aren't the first one to think of using a pasta machine to shred tobacco.
That video is surprisingly satisfying to watch ;)
His machine even has the same crank handle (yellow/orange), probably from the same factory with different brand stamps (a Chinese classic!)
I had read (in forums) mention of using a pasta machine. So I can't claim it :)
After watching that video, I think it will be fun to shred!
 

Puff_Dragon

Well-Known Member
Amazing what a plank of wood, a hole ..and some coconut oil (to stop you planing off the wood :) can get you. Why does that line sound like a 'said the priest to the nun' joke?

Anyway, shredding Cambodian style!

 
Top