Mike Young
Well-Known Member
Hell yeah, zz top beards! Santa clause beard wouldn't be bad either.
True HP Aero For 2011
- Thread starter Trichy Bastard
- Start date
Trichy Bastard
Well-Known Member
Saline? why? BTW- as your roots get closer to aero, you need to dial back nutes as the roots become more efficient. I believe TF stated the highest he has ever gone is 900. Also, if everyone would convert to EC or at least tell us which ppm scale your on along with any numbers would be helpful.
Saline? my bad sorry. Its silicon, dyna grow, what you recomended to me a while back. I am using the ppm scale that calibrates with 1382 calibration solution. Don't know anymore than that. As far as the roots go, I am dialling back the nutes time every couple of days usually 1/2 second at a time. I'm at 2.5/2 now if I remember correctly. I can't go look right now cause I am in night cycle.
mrflamboynt
Member
lookin good.....
Trichy Bastard
Well-Known Member
Ah yeah, that's better- lol... I'm not sure which scale that is, but they're are conversion tables out there found easily with google. It sounds like you're getting it to work, good job man, keep us posted.
Mike Young
Well-Known Member
I needed something to aim my nozzles down a bit, so I decided to have a smoke... Got thirsty and reached for my gatorade.
I cut a bottle cap in half & glued the two pieces together. As for the hole in the center... My bad.
Google sketch up is pretty cool. Anybody ever layout their system?
konagirl420
Well-Known Member
Yay GO TB!!!!!!!!!!!!!!!!!!
PetFlora
Well-Known Member
My ~ 5 yo Hanna HI 98127(pH/temp meter) will not calibrate.
*EDIT: I replaced the probe ~2 years ago. The probe was giving false readings. I was wondering why I needed more acid than usual (and more over the last month month), but did not connect the dots. This could have been as a much a problem as the mist heads missing the pressure valve.
I contacted Hanna and was told that probes last ~ 1 year. Cost of probe ~ $55. I also needed batteries. Between the 2, it was ~ the same as buying a new one. There's a place in Atlanta that comes up when you google Hanna. It is $74.99 + free shipping.
*EDIT: I replaced the probe ~2 years ago. The probe was giving false readings. I was wondering why I needed more acid than usual (and more over the last month month), but did not connect the dots. This could have been as a much a problem as the mist heads missing the pressure valve.
I contacted Hanna and was told that probes last ~ 1 year. Cost of probe ~ $55. I also needed batteries. Between the 2, it was ~ the same as buying a new one. There's a place in Atlanta that comes up when you google Hanna. It is $74.99 + free shipping.
konagirl420
Well-Known Member
at least it is free shipping 
Sestos timer.i've heard and read that it works as needed and that it limitations.can someone with knowledge of this product help me decide.emailed sestos reply was confusing
sent">Model: B2E-2R-220
> can this timer handle tenths of a second per minute 24hrs a day
>on a repeat cycle?""
The reply"Because the program can be set seconds, minutes, hours, single and double" doesnt really answere my question.
sent">Model: B2E-2R-220
> can this timer handle tenths of a second per minute 24hrs a day
>on a repeat cycle?""
The reply"Because the program can be set seconds, minutes, hours, single and double" doesnt really answere my question.
no I havnt but looks interesting!!
the smaller the micron the smaller the hole. This would put 75 micron at 0.002952 inches
Yea I had the same issues with them i got nowhere! Somone will chime in on how to make it repeat it though. I'm Gna try n mess with mine tomorrow
There pretty bad ass! So the 75 micron is ok right?
syder
Well-Known Member
- Originally Posted by kmbud
I have dialled back from 4sec/2min to 3.5sec/2min now at 3sec/2min. I dial it back a little every couple of days and the roots are fuzzing up a little more every day. I have one plant that is not doing this as fast as the others, after inspection I found it had a nozzle clogged up near it. I put in another nozzle that flow a little better but that nozzle is not flowing like it should. I just ordered some more 0.016 bio nozzles to replace ones that need it.
0.016 5-25 micron....025 is what i thought is cool 50 micron rollin like OGs
Thats around the thickness of a human hair I would think. Unless your nozzles have a very small orfice under .010 of an inch I would think you are ok. My nozzles are .016 and I am gona try it.
I have dialled back from 4sec/2min to 3.5sec/2min now at 3sec/2min. I dial it back a little every couple of days and the roots are fuzzing up a little more every day. I have one plant that is not doing this as fast as the others, after inspection I found it had a nozzle clogged up near it. I put in another nozzle that flow a little better but that nozzle is not flowing like it should. I just ordered some more 0.016 bio nozzles to replace ones that need it.
I am confused on what you are saying. 0.016 is about 407 micron.
mine are .08