Berry Ryder - WTF let's SEED ONE again Doh!!

tekdc911

tekdc911

Well-Known Member
HighLowGrow said:
Tek - I haven't popped any of those yet. They are next in line. RIGHT NOW I can only run them under 12/12. I suppose I could pop 3-5 and do 12/12 from seed. I have some extra light now.

It's really time for me to make a nice veg room.

What are you using for your main flower room light/lights?
Click to expand...
the ones i ran 12/12 fs were tall they still veg'd for a while before they finally flipped , should be alot of semi auto's in there i bred the ones that flowered on just over 14/10 some tried to flower on 16/8 i just slowly cut the lights back and then made my choices by when they started to flower ...... attempting to get 24/0 veg and like a 16/8 flower

i was just wondering if you popped any no worries ........ i have some i just put down so ill let you know in the next couple of days how well the germ rate is ..... i had problems with them on the last round i popped but i honestly think it was temps hindering the growth
 
Last edited:
E

EverythingsHazy

Well-Known Member
tekdc911 said:
ive actually used 15 ppm and it worked fine once and then the next time i had to use something stronger .......
Click to expand...
Yea, some strains are more resistant to reversal than others. 25ppm should be good enough to flip anything tho, if you spray 2-3x daily, and cover the whole plant. That's the benefit of homemade/well made cs. You can spray the entire plant, leaves, buds, and stems, and it won't burn at all. It'll just end up growing and looking like a male, as opposed to some deformed abomiation with a a mix of burnt pistils and some pollen sacs.

PPM isn't the most accurate way to determine the strength of your cs tho. A laser pointer shined through it to check for the Tyndall effect should give you a more accurate reading of how potent it will be. Some "250+ppm CS" sold by stores have no visible tyndall effect, while you can see the beam clearly during the day with 15-25ppm well made cs. There is no way the storebought stuff is ~10x as strong. It's actually, most likely weaker.
 
HighLowGrow

HighLowGrow

Well-Known Member
Hazy,

I was getting ready to read your link to CS and it shows a "rollitup error" thread could not be found. I think I'm ready to make my own. Is the thread/link gone or hosed?
 
tekdc911

tekdc911

Well-Known Member
i just bought 2 x 1 gram bullion coins off of ebay it was like 12 bucks roughly its been a while ago and just alligator clipped them .... the cleaning the silver off every few minutes only needs to be done if you are taking the CS i just let it go over night with 3 9 v batteries and there was all kinds of black nasty flakes but it didnt effect the usability of it i just siphoned it out and left the bottom junk layer in the jar i made it in
 
E

EverythingsHazy

Well-Known Member
[QUOTE
HighLowGrow said:
I'm going to go check it out. The link at the bottom works too. Nice.
Click to expand...
Yea, I fixed the link in my sig too lol

tekdc911 said:
i just bought 2 x 1 gram bullion coins off of ebay it was like 12 bucks roughly its been a while ago and just alligator clipped them .... the cleaning the silver off every few minutes only needs to be done if you are taking the CS i just let it go over night with 3 9 v batteries and there was all kinds of black nasty flakes but it didnt effect the usability of it i just siphoned it out and left the bottom junk layer in the jar i made it in
Click to expand...
Just sure they are .9999 pure. Also, not everyone cleans the electrodes very often, but it helps keep your cs clear, and full of microscopic particles, instead of larger bits of silver that just sit on the plants surface and potentially suffocate it, possibly causing some deformation. Ideally, cs should look exactly like water until you shine a light through it. It can still work if it isn't perfect, but it works best and most efficiently when made with more care,
 
tekdc911

tekdc911

Well-Known Member
EverythingsHazy said:
[QUOTE
Yea, I fixed the link in my sig too lol



Just sure they are .9999 pure. Also, not everyone cleans the electrodes very often, but it helps keep your cs clear, and full of microscopic particles, instead of larger bits of silver that just sit on the plants surface and potentially suffocate it, possibly causing some deformation. Ideally, cs should look exactly like water until you shine a light through it. It can still work if it isn't perfect, but it works best and most efficiently when made with more care,
Click to expand...
ya its as pure as you can get ......... the larger flakes fall to the bottom ...... when your PPM gets in the 300 + range is when they start cooking ...... well had some cook around 150 PPM but they still flipped so whats it matter what the branch that was sprayed looked like
 
HighLowGrow

HighLowGrow

Well-Known Member
Day 15 of misting -
3/31/15

Well I ran out of TM today. I used up the 1 oz bottle plus another little bit of another. Here it is today. Just trying to keep it low. I can't get a good pic of the pistils but they appear to be somewhat browning and there aren't many of them. It could be I sprayed directly on the pistils and it burned them or it's working like it should. Just a waiting game now. Here it is today.

3_31_15.png
 
HighLowGrow

HighLowGrow

Well-Known Member
My daughter was cleaning out her room and was going to throw this away. Hell no!! If it doesn't work as a mobile scrog unit, at least it gives me some other ideas.

scrog3.png

+ this

gate.jpg

= this.

scrog2.png scrog1.png
 
tekdc911

tekdc911

Well-Known Member
HighLowGrow said:
Day 15 of misting -
3/31/15

Well I ran out of TM today. I used up the 1 oz bottle plus another little bit of another. Here it is today. Just trying to keep it low. I can't get a good pic of the pistils but they appear to be somewhat browning and there aren't many of them. It could be I sprayed directly on the pistils and it burned them or it's working like it should. Just a waiting game now. Here it is today.

View attachment 3385272
Click to expand...
the beans you showed me should pop i ran a test batch from almost all i had the kc45 BC is still up in the air the jdp x should pop with little issue but they take a while ....... none F2's hazes came up all rotted so ill run another batch and see what i can tell ......... not sure what you have honestly but some may not come up at all from what i can tell so far ......... even the good looking beans mottled/ big and brown didnt even try i scraped the seam on some and manually cracked them after a soak and still nothing ......... so i dunno
 
diystealthgrower

diystealthgrower

Well-Known Member
Update- WEEK 6. Lots going on, see pics.
1) Berry Ryder on left, AKR on right, Dumpster clones just transplanted up front. All these ladies going to be seed mama's (bubbler buckets).
2) Started spraying Berry Ryder with TM; day 3 spraying 4/1/2015
PICS 3), 4), 5) Start the day with spraying TM once in the morning. Then hit them again with another dose of CS (120 ppm) in evening.
 

Attachments

diystealthgrower

diystealthgrower

Well-Known Member
Oh yeah, WEEK 6 of BR and ARK in aero rails.

Growth in this type of set up (aero rails) never ceases to amaze me how fast the plants grow; especially the autos!!!!

Lots of budding sites. Flowers just staring to form and fill in thick (see pics).

Been bending branches to fill in all the squares of trellis netting.
Should have a total of 36 f'n KILLER KOLAS...in 5-6 more weeks...WEEK 5_BR_AKR RAILS.JPG DSC05526.JPG WEEK 5_BR_AKR RAILS.JPG
 
HighLowGrow

HighLowGrow

Well-Known Member
Ok Hazy. Here are a few power adapters I found around the house. Which one would be the best to use?

1. 12vdc 600mA
2. 4.6vdc 900mA
3. 5.2vdc 450mA

adapters.png
 
HighLowGrow

HighLowGrow

Well-Known Member
4/2/15
Berry Ryder

Well watcha know! I swear I looked a couple days back and saw nothing. Same plant different branches.

4_2_15.png 4_2_15a.png 4_2_15b.png

Quick recap:

2/24/15 - Started germing seeds.
3/17/15 - @ 5-6" tall I started misting with TM.
3/31/15 - Ran out of TM and last day of misting.
4/2/15 - Today. KaPOW!!!

Now I need to do some reading on saving a bit of pollen.
 
dream2003

dream2003

Well-Known Member
We'll she's Got big Ball's biggest Ball's of all hehe I just had to say it congrat's on ur she balls almost time to collect some pollin wish I had done something like that with my male gscookies but someone stole him, good thing i took my og critical and Buddha Tahoe og females and moved them far in the bush as I noticed two separate times truck trackes driving around the bush up to my girls took no third chance but left the male then he went MIA (HUNTERS) good thing he was able to do his job and give me my coc seed's
 
You must log in or register to reply here.
Top