Sickplayer13
New Member
Thanks Vertical Grow.sure but add a fan to the 100w heatsink
I'm think about to get a 150w heatsink, it's a little bit bigger, but is quite than a fan.
Thanks brow
Thanks Vertical Grow.sure but add a fan to the 100w heatsink
Those are just the double row strips in 1 foot lengths they'll take the same as the single row 560 mm strips so 24V @ 1.2 A.Need f-strips experts
How would you Power Samsung f strips (25strips ,1 foot/28cm) in a 3×3 tent
I didnt find out how many watts these 1 foot f-strips can handle .
Those are just the double row strips in 1 foot lengths they'll take the same as the single row 560 mm strips so 24V @ 1.2 A.
Series wiring uses the total voltage of all leds added together while the amperage will stay the same.Good Day, Everyone
I have a quick question that i am not sure about.
I have a vero 29 se array led one of the 80w ones that pull 2.1A if i remember correct at 36.6v.
If i have a ac / dc power supply that it lets say 350w and it puts out 9A more or less on 36.6v.
If i put only 1 led onto that power supply will it only pull the 2.1A or will it pull everything that it can take from there?
Thanks
Multiple the voltage times the amperage to get your numbers. So 24Vx1.12A = 26.88 watts.Thanks for the Quick answer !
Do you maybe know how much watt each strip pulls? At 24v and 1.2a
The led will pull everything it can until it fries and the magic smoke escapes.If i have a ac / dc power supply that it lets say 350w and it puts out 9A more or less on 36.6v.
If i put only 1 led onto that power supply will it only pull the 2.1A or will it pull everything that it can take from there?
john073, post: 14513271, member: 676491"]Good Day, Everyone
I have a quick question that i am not sure about.
I have a vero 29 se array led one of the 80w ones that pull 2.1A if i remember correct at 36.6v.
If i have a ac / dc power supply that it lets say 350w and it puts out 9A more or less on 36.6v.
If i put only 1 led onto that power supply will it only pull the 2.1A or will it pull everything that it can take from there?
Thanks
That's not so easy to understand but I'll try my best.Good Day, Everyone
Can someone possibly explain to me what the difference is between the following 2 led drivers.
HLG-320H-C and HLG-320H
Then i see that some sites sell the HLG-320H-C2100B which is rated for voltage 76 ~ 152 V but they put 50v vero 29 se array cobs on that, isnt that voltage to much for the cobs or will those only be used for the veros with the higher 70v requirement?
Thanks
Hi guys!
I write my question here even if it's not quite the same subject thant this thread.
I wanted to use 2020 Aluminium profile for my new light (same kind than Timbergrowlight with driver on the frame) but a friend of mine that is electrician told me that it's dangerous because there is anodization and the frame is insulated: what do you think about that? Finding non-anodized 2020 profile seems to be pretty difficult here in Europe!
Cheers!
You have exactly described what a dimmer does, mate. What else should happen with the energy? If the driver would always pull the same amount of power nobody would use a dimmer...Hi,
If I have a 200 watt cob setup which pulls 200 watts at the wall and I dim it to 50 percent or lower, will the wall wattage also go down?
thanks
The datasheet for your driver will have a graph showing its efficiency VS output...Hi,
If I have a 200 watt cob setup which pulls 200 watts at the wall and I dim it to 50 percent or lower, will the wall wattage also go down?
thanks