Can anyone help me figure this out?
I'm assuming this is wired as
12 sets of 3 series ("3B12C-36V LED" printed on the board, and you can see several groups of 3 LEDs that look like they are wired in series if you tilt the board and
catch the glare off the indentions, but maybe I'm wrong)?
2835's are typically rated 3.0v, .2w, 66ma? So this would be a 9v, .8A (66ma x 12 = 800ma), or 7.2w QB? If the actual wall draw is 30w, is my amperage 3.33A (277ma/LED)? I'm trying to figure out
what I should drive it at, and subsequently then how many I'd need, so I'd finally know what meanwell driver I'd want.
I'm thinking of using aluminium stripping or channel with some heat sinks on the back. They are run @ 30w without a heatsink (other than its non vented case). Wattage falls to 80-87% (25w-27.5w) of its rating after it heats up.
I added pics of the built-in driver it came with if that helps to determine what to drive these at??? Thanks
The 110VAC 30w LED array...
The driver...