40+ lbs with 12 Plants in 2 Rooms on a Flip

Status
Not open for further replies.

diggs99

Well-Known Member
Yeah you gotta have higher temps to actually use the CO2. Speeds up the plants metabolism and of course you also need more light, feed PPM and h2o. In the right balance you can get some stellar growth rates and massive yields. If anything is lacking shit can go south fast and pH needs to be on point because the plants will need easy access to all nutrients.
Interesting, learn something new everyday they say.

I can take rest of the day off now lol
 

diggs99

Well-Known Member
The room im gonna run the 4x8 table in is 8x16, as of now im gonna use the 1230 watts of cmh/hps i have, been trying to buy new lights but the logical side of me keeps telling me no.

I think im gonna seriously look into Co2 for the room tho. Would you run CO2 in my situation? 4x8 e&f table with 40+ plants from clone?
 

Renfro

Well-Known Member
The one thing I am finding is important with CMH is to have plenty of ceiling height. Especially with the 1kW ones. They need like 3 to 4 feet above canopy. lol not happening in my space and the 600 just isn't performing.

I highly recommend CO2. I like generators because I am not hauling and changing tanks, just use the natural gas pumped into my home. They do add a little heat but with a controller they don't run that much unless your room is loosing air.

You don't have to keep the room as cool though so that energy savings probably compensates for the added heat... dunno, don't care, my yields are partly because I can get the plants on overdrive. I wouldn't wanna be without CO2 enrichment.
 

diggs99

Well-Known Member
The one thing I am finding is important with CMH is to have plenty of ceiling height. Especially with the 1kW ones. They need like 3 to 4 feet above canopy. lol not happening in my space and the 600 just isn't performing.

I highly recommend CO2. I like generators because I am not hauling and changing tanks, just use the natural gas pumped into my home. They do add a little heat but with a controller they don't run that much unless your room is loosing air.

You don't have to keep the room as cool though so that energy savings probably compensates for the added heat... dunno, don't care, my yields are partly because I can get the plants on overdrive. I wouldn't wanna be without CO2 enrichment.

Ya i was gonna go the QB route, but even going with knockoff boards it was still gonna cost me 1400-1500 for 900-1000 watts , i can buy 2 x 1k de hps for a fraction of that.

We dont have natural gas in this province, would a generator still work for me? or would i need to go with tanks?
 

Renfro

Well-Known Member
Are those fans blowing up to keep the CO2 from falling? Do you have an IG at all?
The fans that are blowing up between the lights and the side canopy are there to move the heat from the lights on the row ends. Don't wanna cook those side nugs. They also help with room air circulation but I put them there for the purpose of keeping some cool air between the 400w HPS bulb and the plants.

I do not have an IG.
 

Renfro

Well-Known Member
Some day 16 shots of Room A:

20190404_172032.jpg 20190404_172037.jpg 20190404_172118.jpg 20190404_172202.jpg

Some beefy side canopy shots:

20190404_172045.jpg 20190404_172051.jpg 20190404_172100.jpg

600 watt CMH plant slacking, it grows way better where it gets the HPS light, CMH is veg only for me from here on out:

20190404_172108.jpg

So room B is looking like it's not doing as well as room A. These plants are just way better looking in person. So I am ditching the jacks, no fucking around lol. Gonna stick with what I know and has done me good for 30 years now.
 

Renfro

Well-Known Member
Some day 17 shots of room A:

20190405_222827.jpg 20190405_222837.jpg 20190405_222846.jpg 20190405_222900.jpg 20190405_222912.jpg

Those rows are getting narrow lol.

Here is an experiment I did earlier today in room B. I used my grow room glasses in front of the camera and got a pretty cool shot. I will have to try and remember to do this in the future.

20190405_164451.jpg

Much easier on the eye huh?
 

diggs99

Well-Known Member
Some day 17 shots of room A:

View attachment 4312985 View attachment 4312986 View attachment 4312987 View attachment 4312988 View attachment 4312989

Those rows are getting narrow lol.

Here is an experiment I did earlier today in room B. I used my grow room glasses in front of the camera and got a pretty cool shot. I will have to try and remember to do this in the future.

View attachment 4312990

Much easier on the eye huh?
They are looking great renfro.

I use the grow glasses in front of camera for all my pics usually, much better than the orange hps version lol
 

Renfro

Well-Known Member
So I had to order a high CFM kit for my breeding tent. Even on very low setting my 10 " blower sucks the tent in really hard. I think this should solve the problem, I ordered two of them, looks like I can use them both and really beef it up lol. Yeah I know a 10 inch vortex is overkill for the tent but it was on sale cheaper than the 4 inch fan so I figured put it on a variac and just slow it down.
 
Status
Not open for further replies.
Top