Help! Leaves curling

[SisterMooo]

your tent is bigger than mine! LOL.....

We just changed the ventilation system again the other day..... here is how we have it right now. it works really good.

 

[2andfly]

Here is what I did, which is quite lazy but it worked for me. The frame bars support my fan. You could do something similar but just attach your carbon filter to the inlet of your fan.View attachment 4763045View attachment 4763046

Sorry what I’m asking is does the fan blow into the carbon filter? Tryna figure out the correct way to put my fan. Suction is out?

 

[2andfly]

your tent is bigger than mine! LOL.....

We just changed the ventilationView attachment 4763055View attachment 4763056View attachment 4763057 system again the other day..... here is how we have it right now. it works really good.

Do you get a lot of noise with that setup?

 

[2andfly]

Al

Here is what I did, which is quite lazy but it worked for me. The frame bars support my fan. You could do something similar but just attach your carbon filter to the inlet of your fan.View attachment 4763045View attachment 4763046

also once i install How long should i wait To switch to flowering?

 

[smoothJoe]

Temp on the gauge say 20.7c right now but i have it open trying to do my set up thanks bro...and it’s sister*

ok mom ur temps are 20c so if you up to about 28c ur humidity will drop to about 60% hopefully

sister u need a good avy like mine

 

[budofgreen]

Sorry what I’m asking is does the fan blow into the carbon filter? Tryna figure out the correct way to put my fan. Suction is out?

You want the carbon on the suction side of the fan

Al

also once i install How long should i wait To switch to flowering?

That would be up to you personally on when to flower. Get your environment in check first. I would put the filter on the suction side of the fan, so the air is pulled into the filter then out the fan and finally exhausted.

 

[2andfly]

ok mom ur temps are 20c so if you up to about 28c ur humidity will drop to about 60% hopefully

sister u need a good avy like mine

Thanks.....anddd nawww too butchy for that type of avi

 

[2andfly]

You want the carbon on the suction side of the fan

That would be up to you personally on when to flower. Get your environment in check first. I would put the filter on the suction side of the fan, so the air is pulled into the filter then out the fan and finally exhausted.

Thanks bro you’ve been a ton of help, preciate it a lot !

 

[budofgreen]

Thanks bro you’ve been a ton of help, preciate it a lot !

Your welcome. Just read up on exhaust setups and find one that works for your situation. Your plant doesn't look bad either. Good luck!

 

[SisterMooo]

Do you get a lot of noise with that setup?

No not much noise at all..... that is why we switched it..... we had the fan on top of the tent..... we just moves some stuff around. I have the fan blowing into my carbon filter......

 

[SisterMooo]

here is my second grow..... the tall one is Grease Monkey.... I have a net in there but, it isn't even like it should be..... Grease Monkey is topped so it has two main colas!!! Woot!

 

[2andfly]

Your welcome. Just read up on exhaust setups and find one that works for your situation. Your plant doesn't look bad either. Good luck!

Went with this set up, got the fan on the lowest setting

 

[2andfly]

Your welcome. Just read up on exhaust setups and find one that works for your situation. Your plant doesn't look bad either. Good luck!

Should i run the duct outside the tent and switch the set up? Idk bout the suction

 

[2andfly]

Should i run the duct outside the tent and switch the set up? Idk bout the suction

Humidity is at 44%

 

[budofgreen]

Went with this set up, got the fan on the lowest setting

That will be a game changer. Keep an eye on your temp/humidity and keep them in ballpark range and you should be good. If your tent bows in too much open up an air flap at the bottom for some passive intake to the tent. Just keep reading on the subject matter, some of it is just preference. Keep it simple.

 

[2andfly]

Small fan fell and broke 2 of my colas on one of my plants

 

[2andfly]

That will be a game changer. Keep an eye on your temp/humidity and keep them in ballpark range and you should be good. If your tent bows in too much open up an air flap at the bottom for some passive intake to the tent. Just keep reading on the subject matter, some of it is just preference. Keep it simple.

 

[budofgreen]

View attachment 4763111

Well now you are learning some high stress training...

 

[2andfly]

Well now you are learning some high stress training...

shit hurt my heart..do i leave One of these open to reduce suction a little? And if humidity is at 44% do i need To put a humidifier in? Or give it time ? Last couple questions and I’ll leave u alone

 

[becasueracecar09]

I would take some of the 4" flex duct you have, and put it through the port you show in the picture above, and make it into a U, so no light gets in/out of your tent.

If your humidity is still a little too low, you can add some tape over half of your exhaust duct to reduce the airflow rate even more. I do that in my drying room to reduce airflow and extend my drying time.