Sorry what I’m asking is does the fan blow into the carbon filter? Tryna figure out the correct way to put my fan. Suction is out?Here is what I did, which is quite lazy but it worked for me. The frame bars support my fan. You could do something similar but just attach your carbon filter to the inlet of your fan.View attachment 4763045View attachment 4763046
Do you get a lot of noise with that setup?your tent is bigger than mine! LOL.....
We just changed the ventilationView attachment 4763055View attachment 4763056View attachment 4763057 system again the other day..... here is how we have it right now. it works really good.
also once i install How long should i wait To switch to flowering?Here is what I did, which is quite lazy but it worked for me. The frame bars support my fan. You could do something similar but just attach your carbon filter to the inlet of your fan.View attachment 4763045View attachment 4763046
ok mom ur temps are 20c so if you up to about 28c ur humidity will drop to about 60% hopefullyTemp on the gauge say 20.7c right now but i have it open trying to do my set up thanks bro...and it’s sister*
You want the carbon on the suction side of the fanSorry what I’m asking is does the fan blow into the carbon filter? Tryna figure out the correct way to put my fan. Suction is out?
That would be up to you personally on when to flower. Get your environment in check first. I would put the filter on the suction side of the fan, so the air is pulled into the filter then out the fan and finally exhausted.Al
also once i install How long should i wait To switch to flowering?
Thanks.....anddd nawww too butchy for that type of aviok mom ur temps are 20c so if you up to about 28c ur humidity will drop to about 60% hopefully
sister u need a good avy like mine
Thanks bro you’ve been a ton of help, preciate it a lot !You want the carbon on the suction side of the fan
That would be up to you personally on when to flower. Get your environment in check first. I would put the filter on the suction side of the fan, so the air is pulled into the filter then out the fan and finally exhausted.
Your welcome. Just read up on exhaust setups and find one that works for your situation. Your plant doesn't look bad either. Good luck!Thanks bro you’ve been a ton of help, preciate it a lot !
No not much noise at all..... that is why we switched it..... we had the fan on top of the tent..... we just moves some stuff around. I have the fan blowing into my carbon filter......Do you get a lot of noise with that setup?
Went with this set up, got the fan on the lowest settingYour welcome. Just read up on exhaust setups and find one that works for your situation. Your plant doesn't look bad either. Good luck!
Should i run the duct outside the tent and switch the set up? Idk bout the suctionYour welcome. Just read up on exhaust setups and find one that works for your situation. Your plant doesn't look bad either. Good luck!
Humidity is at 44%Should i run the duct outside the tent and switch the set up? Idk bout the suction
That will be a game changer. Keep an eye on your temp/humidity and keep them in ballpark range and you should be good. If your tent bows in too much open up an air flap at the bottom for some passive intake to the tent. Just keep reading on the subject matter, some of it is just preference. Keep it simple.Went with this set up, got the fan on the lowest setting
That will be a game changer. Keep an eye on your temp/humidity and keep them in ballpark range and you should be good. If your tent bows in too much open up an air flap at the bottom for some passive intake to the tent. Just keep reading on the subject matter, some of it is just preference. Keep it simple.
Well now you are learning some high stress training...