Aeroknow
Well-Known Member
Yes. By the druggies. We would frame the shit like 10” OC too. With 14 ga studs i shit you not.They thinkin they are going to be attacked?
Yes. By the druggies. We would frame the shit like 10” OC too. With 14 ga studs i shit you not.They thinkin they are going to be attacked?
Yeah man it’s a a pole for the scorpion lags you put a lag in the pole that also holds your wire ..drill lag in pull down a little then when you drill it spins/ties the wire whamo yeah I prefer framing over anything it’s just face pace and if you can think outside of the box in some cases your golden gravy walls to the deck are nothing when you get into freestanding then you have to get creative but all of it is like riding a bike reallyTwist ceiling wire in? What the hell are we supposed to do now? Nothing? Lol.
3-4 wraps in an inch. I loved framing ceiling and soffits. That was my favorite shit.
I miss shooting in them
We just did a armory where the ceilings and walls were 12”oc framing only 18 gauge studs but over framing it got these 4x8 galavanized metal mesh on walls and the ceiling and had to go to the deck with it 12” overlap on all seems crazyyyYes. By the druggies. We would frame the shit like 10” OC too. With 14 ga studs i shit you not.
Personally i hated getting stuck standing studs on corridor walls. Was prob the stupidest shit we do. Done quite a bit freestanding too. Kickers everywhere! More in strip malls and shit.Yeah man it’s a a pole for the scorpion lags you put a lag in the pole that also holds your wire ..drill lag in pull down a little then when you drill it spins/ties the wire whamo yeah I prefer framing over anything it’s just face pace and if you can think outside of the box in some cases your golden gravy walls to the deck are nothing when you get into freestanding then you have to get creative but all of it is like riding a bike really
Haha yup kickers to the deck diagonals on the walls and a bunch of bob marks ..did one they wanted everything freestanding but no exposed kickers had to build sub ceilings to hang wires for gridPersonally i hated getting stuck standing studs on corridor walls. Was prob the stupidest shit we do. Done quite a bit freestanding too. Kickers everywhere!
So yeah, you most likely frame ceilings with 1-1/2” cold rolled and hat track right?We just did a armory where the ceilings and walls were 12”oc framing only 18 gauge studs but over framing it got these 4x8 galavanized metal mesh on walls and the ceiling and had to go to the deck with it 12” overlap on all seems crazyyy
No we tracked two sides of the wall with heavy gauge track pulled off a wall 48c wich would be first ceiling main .sistered two heavy gauge studs together put on that 48 layout then repeated lolSo yeah, you most likely frame ceilings with 1-1/2” cold rolled and hat track right?
So, i loved doing that, especially huge ceilings but like i was saying before, framing ceilings and tying our 3.4 lath to it. 1-1/2 and cross furred with 3/4 cold rolled. That was tiring but fun.
I’ve done similar. But we usually, if it’s not a smaller hard lid, would do the 1-1/2” and hat track. There’s a newer suspended ceiling system out that is used allot but i forget what its called. Screw drywall to it too.No we tracked two sides of the wall with heavy gauge track pulled off a wall 48c wich would be first ceiling main .sistered two heavy gauge studs together put on that 48 layout then repeated lol
Like 650 grid Armstrong’s makes it...yeah ceilings were small under 12ft long and under 8 ft wideI’ve done similar. But we usually, if it’s not a smaller hard lid, would do the 1-1/2” and hat track. There’s a newer suspended ceiling system out that is used allot but i forget what its called. Screw drywall to it too.
Yes! That’s itLike 650 grid Armstrong’s makes it...yeah ceilings were small under 12ft long and under 8 ft wide
I always think of Robinson when trying to remember the name lmaoLike 650 grid Armstrong’s makes it...yeah ceilings were small under 12ft long and under 8 ft wide
That shit goes up quick and being only 27 and not having a lot of experience in ATC 650 is perfect practice snap and go unlike tile ceilings equals borders ...inside outside cornersYes! That’s it
That’s like Clark Dietrich you know who he isI always think of Robinson when trying to remember the name lmao
Oh yeahThat’s like Clark Dietrich you know who he is
One guy walked the whole building looking for that guy one day ....never found himOh yeah
No but the Robinson, Robinson span deck, always fucks me up when trying to remember the name armstrongThat’s like Clark Dietrich you know who he is
Did he ever find the stud stretcher in the gang box?One guy walked the whole building looking for that guy one day ....never found him
Nope but I tell him I’ll take a piece of tract 120 inches and he always pulls out his tapeDid he ever find the stud stretcher in the gang box?
You gotta tell him he needs to go buy some “framing boots”. Not the “sheet rocker boots”!Nope but I tell him I’ll take a piece of tract 120 inches and he always pulls out his tape