STRAINLY

[colocowboy]

So I just received platinum gucci (Roc’s cut) from Rocbudinc himself, however I didn’t realize he would be sending unrooted cuts. They are not in the best shape & per instructions I did not dip in rooting hormone. I never had anyone send unrooted cuts so what can I do to ensure successOr are they too far goneView attachment 4943264View attachment 4943265View attachment 4943266View attachment 4943267

you can still plunk them in a cup of water. Protocol on snips is cut the stem back a little bit and throw them no water for 24 hours then to the cubes and dome. If they already have been dipped just give them some aloe. You should be able to pull the dome after a day or two.

 

[Dreminen169]

I didn’t see anyone bring up AGSIL16H (potassium silicate) as a remedy for PM. I usually treat my clones with this & it seems to work well.

 

[CaliWorthington]

I didn’t see anyone bring up AGSIL16H (potassium silicate) as a remedy for PM. I usually treat my clones with this & it seems to work well.

I've been mixing agsil powder and using it as my silica for a while, didn't know it could be used for PM though. I just got a bottle of copper fungicide, gonna try that for the next PM spray.

 

[PJ Diaz]

Potassium Silicate foliar spray seems to resist fungal infections by a combination of two forces: 1. It helps to strengthen cell walls; 2. it raises leaf surface ph to a point where mold and fungus can not survive.

 

[Dividedsky]

Potassium Silicate foliar spray seems to resist fungal infections by a combination of two forces: 1. It helps to strengthen cell walls; 2. it raises leaf surface ph to a point where mold and fungus can not survive.

Ya pretty sure you can use dyna gro protekt as a foliar spray. Actually when just feeding protekt to my plants with waterings I've never gotten p/m. It's definitely toughens up plants leaves and makes them resistant to molds and high heat temp swings. To me dyna gro protekt is the best silca product on the market.

 

[Diesel0889]

Ya pretty sure you can use dyna gro protekt as a foliar spray. Actually when just feeding protekt to my plants with waterings I've never gotten p/m. It's definitely toughens up plants leaves and makes them resistant to molds and high heat temp swings. To me dyna gro protekt is the best silca product on the market.

Bas sells the agsil16 by the pound. X amount (grams) agsil16 x water = protekt. Def cheaper and I promise just as good. Makes no difference to me what you use just throwing it out there. Bas has recipe on the agsil page. Way cheaper and the recipe is at the same concentration as protekt. Having said that if I was to lazy to mix it up, protekt is what I would use most def. Best premix on market imo. Just like BAS better. Hope this helps if you didn't already know!

Happy growing!

 

[Midwestsmoker419]

Ya pretty sure you can use dyna gro protekt as a foliar spray. Actually when just feeding protekt to my plants with waterings I've never gotten p/m. It's definitely toughens up plants leaves and makes them resistant to molds and high heat temp swings. To me dyna gro protekt is the best silca product on the market.

I have some of this I have never used might start now. Haha

 

[Herb & Suds]

He said he already dipped them in hormex vit B after cutting. Says that gel restricts the cut from soaking up water & has better results with the hormex vita B. You think I should make a fresh cut & dip in powder possibly?

Once he dipped them they are sealed and that is a good thing
I had a buddy who swore he could clone with only super glue

They look good for cuttings

 

[Midwestsmoker419]

Once he dipped them they are sealed and that is a good thing
I had a buddy who swore he could clone with only super glue

They look good for cuttings

I never knew this what does dipping/sealing the cut do exactly? For shipping?

 

[Herb & Suds]

I never knew this what does dipping/sealing the cut do exactly?

Not sure but that was his story LOL

 

[Midwestsmoker419]

Less air I would assume can be taken in (similar to sticking in water when you clip). Just didnt know if it helped in anyother way lol

 

[PJ Diaz]

Ya pretty sure you can use dyna gro protekt as a foliar spray. Actually when just feeding protekt to my plants with waterings I've never gotten p/m. It's definitely toughens up plants leaves and makes them resistant to molds and high heat temp swings. To me dyna gro protekt is the best silca product on the market.

I've recently switched to mono-silicic acid in my feed as my silica source. I'm using the Grow Genius 40% MSA, which is pretty much the same stuff as Power Si, but 10x as concentrated.

Mono-silicic — Grow-Genius

40% monosilicic acid w/w. Ultra fast-acting silicon nutrient. Strengthens natural growth and defences for bigger, healthier plants with increased resistance.

www.grow-genius.com

 

[Northeastbudz]

I've recently switched to mono-silicic acid in my feed as my silica source. I'm using the Grow Genius 40% MSA, which is pretty much the same stuff as Power Si, but 10x as concentrated.

Mono-silicic — Grow-Genius

40% monosilicic acid w/w. Ultra fast-acting silicon nutrient. Strengthens natural growth and defences for bigger, healthier plants with increased resistance.

www.grow-genius.com

How much do you add per gallon, I use power si and it works great but my wallet does not like it.

 

[Diesel0889]

Got my sour cut and ICC cut from cloney soprano today. They had a very rough transit, all usps fault not him. Praying they will rehab fine.... fucking hate this mail bs.

Shinobi_cuts has shipped. I hope I get all 7 not 5 like last time. Least he shipped somthing out right?! Fucking heat!!!

Day 65 here. Getting the itch to start chopping shit... this inkognyto genetics irukandji just staying dark through harvest (rare in my living soil). All cloudy with a tad of amber. Def fire in these beans!

 

[Diesel0889]

Also a irritating Flava unit from ink as well. Looking like 11 weeks lol... Def some donkey dinks on this gal. 11 weeks+ is irritating to me when rest finish at 10... had to tell someone lol.

 

[PJ Diaz]

How much do you add per gallon, I use power si and it works great but my wallet does not like it.

1.4ml per 10 gallons

 

[thenotsoesoteric]

I never got the whole, we hunted over 1000 seeds to find this one pheno...bullshit, I'm sure some have but let's face it most don't. I have found great gems hunting one pack sometimes it's hit or miss, but phenohunting from 1000 beans of the same strain for the perfect male or female cut is just more exaggerated bullshit to make it look like the customer is getting something that rare and exotic and being able to tax the shit out of said strain/cut/male.

Its kind of like lotto winners. Most winners only bought a couple tickets max. Don't hear many lotto winners saying they bought 1000 tickets.

1 in a million can happen regardless of how many seeds you ran.

 

[Midwestsmoker419]

Most lotto winners play regular

 

[Northeastbudz]

1.4ml per 10 gallons

Wow thats awesome, im definitely going to give it a shot once I run out of power si.

 

[Dreminen169]

I've recently switched to mono-silicic acid in my feed as my silica source. I'm using the Grow Genius 40% MSA, which is pretty much the same stuff as Power Si, but 10x as concentrated.

Wow thats awesome, im definitely going to give it a shot once I run out of power si.

Mono-silicic — Grow-Genius

40% monosilicic acid w/w. Ultra fast-acting silicon nutrient. Strengthens natural growth and defences for bigger, healthier plants with increased resistance.

www.grow-genius.com

[/QUOTE]

That stuff is stupid expensive. $24 for 10ml not including shipping That is robbery.

get the stuff from Buildasoil and mix it into a 7.8% solution or stronger yourself I can make 8.5 GALLONS of 7.8% solution for $22…. It Even tells you how much to weigh out to make the solution yourself. Just sayin… why get ripped off

Agsil16H Potassium Silicate – BuildASoil

$16.00 with Free Shipping. You will receive enough AGSIL16H to make 150 gallons of Bug Spray. Use 1.5 Grams per ounce of Neem Oil per Gallon of Water for a Bug Spray Base. This is a 1.6 weight ratio hydrous potassium silicate pow

buildasoil.com

Also here’s a $5 off code so that makes it $16

Here's a $5 off coupon for your first order at BuildASoil. To accept, use my referral link:
http://i.refs.cc/7EDQ0skT?smile_ref=eyJzbWlsZV9zb3VyY2UiOiJzbWlsZV91aSIsInNtaWxlX21lZGl1bSI6IiIsInNtaWxlX2NhbXBhaWduIjoicmVmZXJyYWxfcHJvZ3JhbSIsInNtaWxlX2N1c3RvbWVyX2lkIjo2Nzg2MzI3MTV9