BarberBudz
Member
Hey guys! This is my first rodeo. I'm posting my progress just to start a thread. So far so good! I have an AC Infinity 3x3 with their S33 Ionboard Light, and accompanied T4 or S4 inline fan. I have 2 Wedding Cake Auto's sewn directly into their 5 gallon fabric pots on 06/27 filled to 3/4 inch below top with FFOF and some seed starter right in the top center about a solo cup amount to germ these two babies. Of course I used about 25% Perlite and about the same in EWC. Mycorrhizae (sp?) was added in between the two soil layers, and in the seed pockets. I used humidity domes to keep the rh high. Tent keeps a consistent 71-75F and around 55-67%RH. Lights at 37 inches above soil, and is at about 56 Watts. I've got a clip on fan blowing from the top of the tent down indirectly at a wall so the first sprout can get strong since it just popped on the 1st. The other one is right at the edge of the top about to come through. The sprout has the humidity dome cracked adjusting to the tents rh and temp slowly. Any tips or advice/suggestions are gratefully accepted! Thanks Growmies!
Attachments
Last edited:
