The 30 minute 6 plant aero build

FilthyFletch

FilthyFletch

Mr I Can Do That For Half
Thanks for the props guys..Platinum the bubblegum should do real good in this setup well depending on its origin. I use clones from the original mom used to create bubblegum and it grows excellent and fast hope it works well for you all..oh and I have seen the aquamist but havent gotten to disect one to figure out the poor mans version just yet but Im planning on it. Im still working on building my own version of the overpriced BC bloombox producer but am slowed as I had a minor eye injury with some metal in the eye and am recovering so I havent gotten back to it yet as I wanted to this year but I will and will post..
 
oats

oats

Active Member
Just wondered where to get the cycle timer? Also I am using an 18 gal unit no problem? One other question should I lower the mister unit (cut some of the PVC off the ends so it fits lower in the unit)
 
oats

oats

Active Member
Thanks a lot for this thread I just finished my unit last night with an 18 gal unit, any chance someone can point me to some info on maintaining proper water nutes and PH?
 
eagleClaw

eagleClaw

Well-Known Member
oats said:
I am getting a lot of leakage from my unit any suggestions?
Click to expand...
depending on the type of tub you are using, you might have to shave down some plastic.
If you are using a rubbermaid tub, on the underside of the lid, there are thicker plastic support rails running throughout. Shave those down around the areas where the lid makes contact with the tub and that should cut down on leaks quite a bit.

check out my grow journal in my sig for some tips, using this exact aero setup. working out well so far.

:joint:
 
L

LimPShoT

Well-Known Member
L

listerine21

Active Member
hey FilthyFletch i saw that you would build these ealier in the thread so i emailed you a few days ago at the hotmail adress you gave Lay a few weeks ago. I just wanted to make sure you were using that one. thanks
 
oats

oats

Active Member
Ok just a quick update I went to Loews and purchased a different container which actually seals and have not had one leak yet.
 
jimmy130380

jimmy130380

Well-Known Member
this is gonna happen today thanks 4 the build design this is 1 of the best posts i have read ill post some pics and i hope a few of you help me out with the tech side of the chem side im really new at indoor
 
jerkin247

jerkin247

Well-Known Member
i dont know i just added more nozzles though i figured it would compinsate. i made it before reading this post
 
jimmy130380

jimmy130380

Well-Known Member
this gonna sound dumb i know but can you just use water and somthing other than chemicals to do this i know it stupid but if i dont ask
 
jimmy130380

jimmy130380

Well-Known Member
im raiding my hardware tomoz and just wanna get this right are you starting from seed also whats the go with the outlet taps ur running on the out side or is that inlet does your pump go on the inside then pump 2 the the tap point on the outside
 
jerkin247

jerkin247

Well-Known Member
Filthy, have you used one of these aero systems through flowering? if so how did the plants do and how much did one unit yeild?
 
oats

oats

Active Member
Jerkin tell me what did you do? It looks like your running the line externally?? its interesting just wondering what your doing?
 
oats

oats

Active Member
Eagle its a rubbermaid unit and it doesn't leak a bit though I had to add some wires to my baskets, the three inch hole was just a bit loose so I created some wire handles that keep them from falling through and make it easy to pull the baskets out.
I have been trying to clone with this unit by putting a clear glass cup over the plant and just running it with my other seed grows.
Still trying to come up with an easy way to change the water and manage my organic nutes
 
You must log in or register to reply here.
Top