First Grow, Clones

[mame]

So i recently acquired three clones from a buddy, and am constantly coming to this site reading through tons of threads and have found this place to be a TON of help in my first week of having said clones.

the attached is a picture of my setup. good? bad? any tips?

in the tray is a little water, just enough to go through the holes in the bottom of the sides while still able to get small amounts of air.

Inside seems fairly inconsistant as far as condensation goes, and it seems one plant is sort of drooping.

UPDATE: after tons of searching the last couple of days i have read that standing water is bad, however when i recieved these clones my buddy told me his method and the way he was taught was to keep the clones in a tray with a small amount of water. is this killing my plants?

if i can't find any viable solution to my problem with these clones i will have to do as suggested and recut the stems and try again.

i also read that i may be using too much light?

seems i should have done more research specifically about clones before i took these.

 

[mame]

hm, i'm gonna bump this while i go take a pic or two of the plants close up.

 

[mame]

up close pictures of what they look like.

 

[Maxbeasily]

if you can see roots then the plant took and the yellow indicates "could" over fertilization or over hydrating.

if the roots are not present take the plant out and rube stem end in hydrogen peroxide"quickly!!!!!!" or simple clean stem and recut.

after you recut, plant in your medium, nute with high nitrogen, leave in dark for about 15-24 hours, then regain normal veg state lighting.

you might come into more problems if the clones were cut when the plant was in flowering stage for longer than 2 weeks

 

[mame]

if you can see roots then the plant took and the yellow indicates "could" over fertilization or over hydrating.

if the roots are not present take the plant out and rube stem end in hydrogen peroxide"quickly!!!!!!" or simple clean stem and recut.

after you recut, plant in your medium, nute with high nitrogen, leave in dark for about 15-24 hours, then regain normal veg state lighting.

you might come into more problems if the clones were cut when the plant was in flowering stage for longer than 2 weeks

the originals were in veg state and had been growing for 3-4 weeks at the time.

to the bolded, i apoligize for my ignorance but why would i do that?

 

[Maxbeasily]

no that was my first reaction, but the purpose is to clean all possible sources of infection and a plant is most sustainable to illness via it's roots and in this case .

i would recommend this method after exhausting all other options

here is a more technical site.
http://www.hydroponics-gardening-information.com/Hydrogen_Peroxide.html

 

[mame]

no that was my first reaction, but the purpose is to clean all possible sources of infection and a plant is most sustainable to illness via it's roots and in this case .

i would recommend this method after exhausting all other options

here is a more technical site.
http://www.hydroponics-gardening-information.com/Hydrogen_Peroxide.html

very interesting method i hadn't read/watched/heard yet.

so if that is my last resort, what would in turn be my first?

 

[richjames]

have u got them in the expandable peat pucks in those cups? I'm new to cloning myself, and thus far i've killed like 3or4 clones.... though NOT due to adverse conditions, simply through fault of my own. anyhoo, i know those peat pucks tend to have too big of a gap between stem and rooting medium... rooting temps are also of importance too... P>S i have read, though not done it myself til tonight... , that tough-to-root clones MAY be re-cut and planted again in hopes of rooting...

 

[mame]

I noticed there seemed to be too much air between the medium and the stem so i pushed the medium around it closer, at that point it had been ~5 days and there wasn't any sign of roots. it has been nearly 8 days now and the plants are faring no better.

 

[Maxbeasily]

what your doing right now, however you have a relatively short time period before the plants become not viable. so don't wait to long to decide to re cut or not.

here is another good resource about clones, just skip over the parts about rockwool. unless you have access to Rockwool, then use it. they work great.

 

[mame]

so at ~14 days i should recut+re hormone the plants and try again? or is 14 days too long?

and if you had meant to put a link into your post i am not catchin it.

 

[Maxbeasily]

my bad http://users.lycaeum.org/~npkaye/cloning_ph2.html

um i would say 14 days may be on the late side of correct, depends on how the plants look. if you deprive the plant of nutrients for to long it will die.

i hope i helped a little
peace and good riddens, will be checking up on how they are doing so keep posting questions and updates.

 

[mame]

thanks a lot i am gonna look into this and save my plants!

 

[mame]

bump for a new day

 

[mame]

Running out of guides to read, not many seem to address my situation... no one has experienced similer problems before?

i am banging my head on the wall on this one

 

[KillHit]

you arent using too much light.. I have cut clones and very easily just slid them into my medium and in about a week they started rooting.. just give it time and dont go messing around with it alot, you'll stress it out.

 

[phil le b]

So i recently acquired three clones from a buddy, and am constantly coming to this site reading through tons of threads and have found this place to be a TON of help in my first week of having said clones.

the attached is a picture of my setup. good? bad? any tips?

in the tray is a little water, just enough to go through the holes in the bottom of the sides while still able to get small amounts of air.

Inside seems fairly inconsistant as far as condensation goes, and it seems one plant is sort of drooping.

UPDATE: after tons of searching the last couple of days i have read that standing water is bad, however when i recieved these clones my buddy told me his method and the way he was taught was to keep the clones in a tray with a small amount of water. is this killing my plants?

if i can't find any viable solution to my problem with these clones i will have to do as suggested and recut the stems and try again.

i also read that i may be using too much light?

seems i should have done more research specifically about clones before i took these.

ya man not bad bit like my setup and i jus started sum clones today and need all the info i can get

so at do u think mate ????????????

 

[mame]

yours look healthy to me.

i posted some pics of mine in like the 3rd or so post, see mine are drooping heavily and turning very yellow especially on the bigger leaves. i hear a little yellow is normal but it seems to be getting excessive.

 

[mame]

The only thing that i am still 100% completely unsure about is...

should i leave standing water in the tray for the clones till they root?

 

[Snott]

mine rooted in 5 days doing this

take your clone cut at a 45 degree angle then slice up the stem an inch flod those back and place in medium you can also notch just like skinning but only a little on the stem at the bottom it will expose more area and cause it to go into overdrive producing roots very quickly

i did this with a seediling aswell that the root got ripped off of and it rooted in 4 days

i also put mine on a heating pad on the lowest setting to keep medium nice and warm

24 hrs light