How to make Colloidal Silver to make Feminized seeds

B

born2killspam

Well-Known Member
Nine Coats said:
Hey Mates ~ Been spraying my Ladies every other day for 6 days now with CS water. I run the CS for 24 hours, the color is light copper in hue. I'll continue for another week spraying every other day. I've read that many plants look poorly after spraying, mine however look great. Hummmm? I really soak them too.
Another question for someone: Say i have a female that is positioned next to a pollinating male, she's getting laid for sure! I'm spraying her too, what can I expect by way of seeds? Will some be fems, while others are regs? In un-chartered waters here.
Is a 14 day run spraying going to do it? The ladies were just beginning to flower when i began. My bad.
Click to expand...
Your scientific method sucks.. why add the male variable to this experiment?? You'll just end up with mystery seeds.. Since the male would be contributing males and females, you wouldn't even be able to use apparent feminization to know whether your silver application worked..
And sadly I think that is highly questionable.. IIRC you're using a product 50-100x weaker than successful experiments (real experiments on non-cannabis plants) I've read.. Those experiments also report the appearance of stress, unlike your observations..

BTW Fletch (and others) I came across some data that says ionic silver solutions increase in conductivity (EC) by 1.6µSiemens/cm*ppm as compared to 2.0µSiemens/cm*ppm that our meters are calibrated for..
This means that a 1000ppm ionic silver solution would read 800ppm or 1.6EC on the meter..
(Basically multiply the ppm on the readout by 1.25)
 
N

Nine Coats

Active Member
born2killspam said:
No offense, but your scientific method sucks.. why add the male variable to this experiment?? You'll just end up with mystery seeds.. Since the male would be contributing males and females, you wouldn't even be able to use apparent feminization to know whether your silver application worked..
And sadly I think that is highly questionable.. IIRC you're using a product 50-100x weaker than successful experiments (real experiments on non-cannabis plants) I've read.. Those experiments also report the appearance of stress, unlike your observations..

BTW Fletch (and others) I came across some data that says ionic silver solutions increase in conductivity (EC) by 1.6µSiemens/cm*ppm as compared to 2.0µSiemens/cm*ppm that our meters are calibrated for..
This means that a 1000ppm ionic silver solution would read 800ppm or 1.6EC on the meter..
(Basically multiply the ppm on the readout by 1.25)
Click to expand...
Step back a piece , , , Didn't say,
"scientific" you did.I said i was just trying it. No freaking big deal. Ever hear about trying things? You might even be correct in what you've say, how you've offered it to me is questionable. Unlike many of you, I DO NOT KNOW EVERYTHING ABOUT POT. I'm still learning. I cook my Juice just like most on the this site. Only much longer. I use a lazar beam to judge strength(don't jump dude!). I've followed the instructions par batum offered on this site. If I'm confused about what is happening, doesn't mean i'm all fucked up.
 
N

Nine Coats

Active Member
FilthyFletch said:
hmmm havent heard anyone trying that way of having them close while doing silver sprays should be interesting makes sure to come post a thread on what the seeds are when you got them done.
Click to expand...
Hey Filth, Man appreciate that vibe. many on here are out to dump on everything just like republicans! You are correct, haven't heard about it before. Let me explain my motives?
I have 7 Ladies just being sprayed with CS.
I have a killer God BudXHash Plant crossed male that I got from The Dukes of Canibus. I'm crossing him with a clone only Buddha Ball. I had some extra CS after doing my run, for some reason I emptied the remaining CS on the Buddha Ball , ONCE!
Now, I'm asking my mates what do they think about that? Whatever happens, i'll have seeds, which is the purpose of this project. If mates think it is unwise to spray a female while she's getting laid, then I'll seriously consider stopping that. But, as you've hinted, and since i've many other projects going, might be interesting to see what come of it and then post the results,
Why so many jump on so many is weird for pot people, i understand it about republicans!!
Cool runnings Filthy, nice vibes
 
B

born2killspam

Well-Known Member
A laser will only show you 'colloidal' silver content, and that is useless to us since its essentially uncharged silver dust floating in water.. What we need is 'ionic' silver (charged Ag+ 'ions').. Those are actually smaller than a silver atom, and will not refract light..
There are undoubtedly some Ag+ ions in your solution, but probably not enough, and regardless of number they won't show up to your laser pointer..
BTW, healthfood CS focuses on the colloidal particles not the ions.. Eating ionic silver would just cause the acid in your stomach to precipitate it all as silver chloride..
 
pinkus

pinkus

New Member
born2killspam said:
No offense, but your scientific method sucks..
Click to expand...
"
i guess if you didn't mean to offend you failed miserably. how about "that's pretty cool, but if you did it this way you could..."and so on. exchange of information is so much more efficient if people are open to hearing things...they tend to shut off if you say mean things to look good (to yourself).
 
B

born2killspam

Well-Known Member
Just don't want the guy coming back in 3 months saying he's pretty positive that his CS application worked when he gets some seeds.. This thread is about making your own workable silver solution, not producing mystery seeds..
And I edited the 'No offense' part out of the other post.. :)
 
pinkus

pinkus

New Member
born2killspam said:
Just don't want the guy coming back in 3 months saying he's pretty positive that his CS application worked when he gets some seeds.. This thread is about making your own workable silver solution, not producing mystery seeds..
And I edited the 'No offense' part out of the other post.. :)
Click to expand...
ha ha good work!
 
TLR

TLR

Well-Known Member
Can this work with just one silver coin submerged, and left on overnight as opposed to two coins?
 
B

born2killspam

Well-Known Member
I would think so, but likely not in one night.. Put the silver on the anode (positive), make sure only silver is submerged, and use Stainless steel for the other electrode..
 
The Grinch

The Grinch

Well-Known Member
Hey ppl

about to start doing this to fem some autos.
going to put 6v 800ma through silver into water for 8hrs or until i get to about 800-1000ppm.
going to spray every 2nd day for the next 2 weeks. the plants are about 2 weeks in since they appeared above the medium.

let me know if i should do anything differently

will let you know how it goes in 2-6 weeks.

Grinch Out
 
B

born2killspam

Well-Known Member
I think its going to take alot more than 8hrs because you won't actually be running at 800mA, thats just the maximum your power source can supply..
 
The Grinch

The Grinch

Well-Known Member
can i do it over a couple of days, as in turn the powersupply on for 12hrs, than off for 12, than on again, and so on until i reach desired ppm?
 
B

born2killspam

Well-Known Member
Yes that would be ok to do.. You won't be able to send alot of current at 6V though, regardless of your psu (and upping the voltage won't help really).. To get 3A you'd need the resistance between the electrodes to be only 2ohms.. (V=IR, I=V/R, 3A=6V/2ohms).. Distilled water is not very conductive, a 1cmx1cm channel 1cm in length has a resistance up to 18Megaohms! That goes way down as impurities like silver are included.. Worst case scenario if you had ultrapure water though, would be your current from 6V would only start out at 0.3microAmps in a 1cm^2 cell.. At that rate it would take 15000000s to get the 1000ppm, but like I said, as particles get into that water the conductivity goes up..
Your 3A continuous psu means that 3A is what its designed to run most stabily at, not that it will push 3A through any circuit.. To do that it would need to vary the voltage V=IR style, and obviously there would still be limits..
 
Green Cross

Green Cross

Well-Known Member
To add to this topic, and for future reference... I haven't tried this product, but it looks safe, and should get the job done. I don't suppose anyone has tried it?


SHUTOUT™ Athletic Spray is engineered to eliminate odour-causing bacteria from all types of athletic clothing, gear and footwear. The patented Nano Silver ingredient works its magic and leaves a neutral smell behind. This key ingredient is known to safely eliminate fungus, bacteria, moulds and more. It is also known to prevent acne, odour, athlete’s foot, eczema, heat rashes and more. When the spray is used on smelly clothing/gear the tiny Nano particles of Silver will work their way into fabrics and hard surfaces, eliminating any odour-causing bacteria that are embedded within. Additionally, the spray can be used as a proactive method to prevent odour, bacteria, etc. Sprayed on new gear, the Nano Silver particles will prevent odour for up to 30 days, continuing to work the entire time. This feature makes SHUTOUT™ Spray great for brand new runners, helmets, gloves, equipment etc. SHUTOUT™ Athletic Spray contains only natural ingredients and fragrances, making it great for people with sensitive skin and allergies.

$24.99
 
Green Cross

Green Cross

Well-Known Member
GNC has Colloidal Silver for 29.95

Why mess with electricity and water, and dissolving expensive silver coins? :lol:
 
B

born2killspam

Well-Known Member
I'll tell you ppl right now, you won't find anything that has any hope of working in stores! Those are all made of small clusters of elemental silver.. The exception being salts of silver like silver nitrate, or silver thiosulfate..
If you're dead set on trying silver in elemental form, then just dress your plants with some bling..
 
You must log in or register to reply here.
Top