watercooled@
Active Member
First off, thank you to everyone who helped out in the original design thread here.
Next, thanks to watercooledgardens for a SWEET package deal on some equipment going into this trailer.
Last, thanks to Yaboii for the inspiration and the amazing avatar!!
Today was officially construction day #1
Some history... I was asked to construct this room for a friend of a friend of mine after talking about yaboii's thread. This is not my room, but I get to decide how and what goes in it. It is a large race car trailer.
Anyway, here one of the two finalist for the general design. This one would be aero/dwc inside 4" PVC. The reservoirs will live outside or upfront against the front wall. The square boxes down the middle will feed fresh air to the cool tubes as well as remove them. We loose some light to obstruction, but it will greatly diminish our cooling requirements.
Construction has started. The walls and roof were all removed today and the insulation is being cut and put in place. This will take a couple days easily! Half way done getting the walls down.
Showing the trailers frame and how we are fitting 2" thick insulation.
Driver side almost done!
This is the stripped trailer, ready for insulation!
Next, thanks to watercooledgardens for a SWEET package deal on some equipment going into this trailer.
Last, thanks to Yaboii for the inspiration and the amazing avatar!!
Today was officially construction day #1
Some history... I was asked to construct this room for a friend of a friend of mine after talking about yaboii's thread. This is not my room, but I get to decide how and what goes in it. It is a large race car trailer.
Anyway, here one of the two finalist for the general design. This one would be aero/dwc inside 4" PVC. The reservoirs will live outside or upfront against the front wall. The square boxes down the middle will feed fresh air to the cool tubes as well as remove them. We loose some light to obstruction, but it will greatly diminish our cooling requirements.
Construction has started. The walls and roof were all removed today and the insulation is being cut and put in place. This will take a couple days easily! Half way done getting the walls down.
Showing the trailers frame and how we are fitting 2" thick insulation.
Driver side almost done!
This is the stripped trailer, ready for insulation!
Attachments
-
46.3 KB Views: 2,139
-
32 KB Views: 63
-
41.3 KB Views: 2,098
-
32.5 KB Views: 2,116
-
46.3 KB Views: 2,129