rasputin71
Well-Known Member
Flower. My current flower box will be converted to the drowning/dark/drying chamber.
My Eventual Perpetual Garden; Round 1: Chronic Haze Clones and Attitude seeds.
- Thread starter rasputin71
- Start date
NorthernLights#5
Active Member
then I would just go with HPS, but then again thats just me
rasputin71
Well-Known Member
The tent is only one state away and should be here by the end of the day tomorrow. I will be making room for it tomorrow and going to get a new hood, fan, and some ductwork. I actually blocked out the day on my work calendar so I dont plan any support sessions tomorrow. Hopefully I can have it mostly setup tomorrow and get the flower plants moved into it on Thursday. The SBR will be ready to flower soon and the WoW still has at least 2 weeks until she is finished.
I will be glad to have the extra square footage. I will be increasing from 9.44 sq ft to 16 sq ft.
I will try to post some new pics later tonight if I have time. My 8gb card quit reading in my camera so I had turn down the photo quality and use the camera internal memory. The SBR got trained twice today for SCOB and my Auto broke 24" tall today. :S
I will be glad to have the extra square footage. I will be increasing from 9.44 sq ft to 16 sq ft.
I will try to post some new pics later tonight if I have time. My 8gb card quit reading in my camera so I had turn down the photo quality and use the camera internal memory. The SBR got trained twice today for SCOB and my Auto broke 24" tall today. :S
rasputin71
Well-Known Member
Hehe, I love my job but I wouldn't have it if I hadn't filed bankruptcy.... Still interested?
Indefinately
Well-Known Member
I also like the updates.....
Pictures coming up ay......
Pictures coming up ay......
rasputin71
Well-Known Member
Since you asked:
The Nute/Neem damage caused some unusual internodal stretching on the NLxSK. It shouldn't matter much as she will be topped above the 2nd node and have the first node pruned off later.
I loosened and adjusted some of the Wembley's training wires and noticed she is trying to eat the metal cage.
Sugar Black Rose: SCOB Training session 1
Flower Box yesterday
- WoW: 39 Days
- PW: 30 Days
- KKS: 23 Days
- LSD 13 Days
- PWW: 4 Days
PW: 30 Days
PWW: 4 Days
LSD 13 Days
KKS: 23 Days
WoW: 39 Days
Veg Box yesterday
- IDA: 40 Days
- SBR: 39 Days
- AKS: 27 Days
- NLxSK: 20 Days
- PA: 4 Days
- MM: 0 Days
Sugar Black Rose: SCOB Training session 2
rasputin71
Well-Known Member
Here are some pics from yesterday. UPS didn't show up til the end of the day so I only had a couple hours before the flower lights shut off. It was enough time to get the tent setup and the new air-cooled hood with the 400mh batwing temporarily. I will be heading downstairs shortly to work on the exhaust fan and ducting and move the other air-cooled hood over to the tent from the veg box. I decided to move my veg lights into the old flower box for the extra height. It helps with the heat from the open 150hps and gives the Il Diavolo Auto the extra room she needs.
WoW: Day 40
She is the last one showing extreme mag deficiencies from when I was using tap water but she still looks pretty good. Some of her fan leaves are getting brittle and broke off so I took a few others that were mostly dead. Compared to the mag deficiency issues from my first harvest the damage here is pretty minimal. This reminds me I need to give the LSD some more epsom in hopes she doesnt get this bad later in her flower cycle.
I am really liking how the CCOB training is working out.
Under the 400hm batwing
Once I hooked up the lamp in the tent I could see a few pinhole light leaks when standing outside the tent from the stitching. It was mostly around the 2 side pockets but there was a couple up around the exhaust vent ports also so I covered them with reflective tape.
Veg box moved. I think I will pickup one more of the tall vertical fans for veg and maybe one more for flower also.
WoW: Day 40
She is the last one showing extreme mag deficiencies from when I was using tap water but she still looks pretty good. Some of her fan leaves are getting brittle and broke off so I took a few others that were mostly dead. Compared to the mag deficiency issues from my first harvest the damage here is pretty minimal. This reminds me I need to give the LSD some more epsom in hopes she doesnt get this bad later in her flower cycle.
I am really liking how the CCOB training is working out.
Under the 400hm batwing
Once I hooked up the lamp in the tent I could see a few pinhole light leaks when standing outside the tent from the stitching. It was mostly around the 2 side pockets but there was a couple up around the exhaust vent ports also so I covered them with reflective tape.
Veg box moved. I think I will pickup one more of the tall vertical fans for veg and maybe one more for flower also.
rasputin71
Well-Known Member
Heading down right now to try and figure out the exhaust/ventilation and make a final decision if I am going to run both hoods or not. I have just the 600hps in there right now and it lights up quite nice, but I already opened the new hood so.......
Not sure if you can tell but there is less than 2" of clearance for the tent and I had to take the fabric off and redo my top frame once.
Not sure if you can tell but there is less than 2" of clearance for the tent and I had to take the fabric off and redo my top frame once.
rasputin71
Well-Known Member
Yes, the same 400mh horti that was in the batwing in my old flower box is now in a matching air-cooled lumenaire hood. I just got it all setup and vented and closed my tent up for it's first temp test. No pictures though because my camera wont connect to the PC. The SD card quit reading in the camera the other day so I had to start using the internal memory but now it is time for a new camera apparently. 
The ballast is switchable, and I have a horti 400 super hps lamp on the shelf that I can use to have all HPS instead of mixed spectrum. I also have a 600 super hps spare lamp on the shelf so I would only need to buy another 600hps ballast to be running dual 600's.
*I got the camera connected to my other PC, so pics are coming.
The ballast is switchable, and I have a horti 400 super hps lamp on the shelf that I can use to have all HPS instead of mixed spectrum. I also have a 600 super hps spare lamp on the shelf so I would only need to buy another 600hps ballast to be running dual 600's.
*I got the camera connected to my other PC, so pics are coming.
rasputin71
Well-Known Member
HotPhyre
Well-Known Member
I love the new set-up bro im sure you will love it to.
I noticed on any turns in the pipe helps raise the temps, you might want to put a solid 90 elbow on the inline fan where that flex ducting is connected if your having temp problems, but im sure you know what to do
I noticed on any turns in the pipe helps raise the temps, you might want to put a solid 90 elbow on the inline fan where that flex ducting is connected if your having temp problems, but im sure you know what to do
rasputin71
Well-Known Member
It looks like temps shouldnt be much of an issue. The old 34" x 40" flower box, with the 400mh in the batwing instead of air-cooled, would get to 78 or 79 and veg was getting to a bit over 80. Currently flower is 71f and 32rh with the tent doors open and veg (now in the old flower box) was around 75/40 when I checked this morning.
