Search results

How should I approach bumping up the magnesium. I have a 16 gallon reservoir total. Should I start with 10 mg of cal mag and wait a couple days? Totally change the reservoir and bump up the cal mag to 100% of the cutting edge feed schedule?

Roots look ok they are a little stained from the nutrients no slime or anything. Yes using the whole line including cal mag and following there feeding chart at 50%. Using filtered tap water which is around 15 ppm. Tent temp 68-70 humidity in the 50s. Using led light bar at 10K lux change the...

I have no ideas what is wrong with my plant. 2 weeks ago the ppm was in the 800s ph 5.8 and I thought I was getting nutrient burn so I lowered ppm down to 500. The leaves are browning at the tip and are not a healthy looking color. I’m using cutting edge nutrients. Ppm is 510 res temp 67 and...

Thank you

Thanks I reposted in another thread and was told EC was too high going to cut it down to 500 ppm and see what happens

Thanks man appreciate your help

Ph only dropped once and it happened the day before I had to recalibrate my ph ec meter. Roots are white no funky smells. Do you guys recommend flushing out the whole reservoir or can I empty half and add water to cut down the ppm.

Ok thanks I will flush it out and start with a lower ppm. Yes ph has been pretty stable

Hello posted this in another section but did not get any responses. I’m running a waterfall rdwc 15 gallon. I’m using cutting edge nutrients and following the recommended feed chart at 75%. Ph is at 5.7 water temp 68 F ppm at 1080. The lower leaves started browning at the tips and were light...

Not sure what is going on with my plant. I’m growing in a rdwc setup 15 gallons. Using cutting edge nutrients and following the feeding schedule at 75% strength. Ppm is 1080 res temp is 68 F and ph is at 5.7. Air temp in tent is between 68-72 humidity at 45%. Lower leaves started browning at tip...

Thanks man appreciate the help

I have my drip ring on a timer to feed for 15 minutes every 8 hours. Should I increase the feeding to every 6 or 4 hours?

Ok thanks

It’s a waterfall rdwc system. One pump runs from the reservoir to about 3/4 of the way up the grow bucket water dumps into grow bucket causing surface agitation. Water drains out 3” pvc back to reservoir. Top feed pump goes from reservoir to drip ring and is on a timer therefore 2 separate pumps

The rdwc is running 24/7. The top feed is on a timer so the water pump does not heat up the reservoir

Yes the roots have not reached the water in the bucket yet. I am feeding 4 times a day for 15 minute cycles. Do you think this is enough or should I bump up the feeding to 6 times a day.

Thanks I added some magiCal I’ll see if that helps at all.

Ppm is at 700 I used filtered water. I believe the white spots are dried nutrient solution

The white on the pebbles is from the ring sprayer top feeding my plants. The green is not really making its way out as far as I can see. If it has moved out it’s minimal. I’m new to this so not sure how long it takes a plant to recover.

Ok I added 25 mL of each flora series Thursday night and the PH is 5.78. I have not seen any improvement. Should I wait a couple more days? Should I change out the reservoir with fresh water/nutrients? Thanks for any info