Search results

I agree with the led recommendation but would add that a dimmer would help with the headroom. I also have a similar size cab.

You could grow multiple levels with diy cob leds and flat scrogs. You could easily do three maybe four levels with that much height.

Do you have a carbon filter? Stealth and carbon filters go hand in hand. Using intake fans does not work well with carbon filters either, you need negative box pressure. I would look into this now before you flip to flower as it will be easier to hide the smell until you get it figured out.

I like the dresser idea but I would go a step further and put a ten gallon fish tank on top of it. It would make a good excuse for noise (cheap air pump) and you would have a good source for water that you can keep ph'd and oxygenated right there.

Buenotime did this same tent size over in the micro section on icmag. He used three cxa3070 3000k at 1500mah and did very well. The 3000k veg very well and flower the best. I would go with three cxb3070 3000k and a dimmable driver. You will want the dimmer when the plants get close to the...

If you are looking to replace hid bulbs in the future I would possibly look into building a 5000k dimmable cob with a good quality chip. It would be a fun learning experience and could turn into one hell of a veg light if turned up.

His part # says ab but he says it is ad in the description. I'd be leary but it's a good price imo. Pretend its the z4 bin and if it's better you win.

I saw someone mention they like the chassis and it was a product I recognized. Reviewing a product is not only about what you want to see. Its also about the components used to make it. I don't sympathize with your lack of tools or time, that is your choice on how you decide to approach life. I...

I'm not making lights to sell... I just noticed a product I recognized and put the info out there, similar to the people pointing out the bridgelux and meanwell components. I could afford one of the prebuilt ones if I wanted it but it wouldn't work in my setup so I built my own, no need for...

It looks like the chassis is a drawer from a parts cabinet. Durham mfg sells these for anyone looking to DIY a similar light.

Are you running positive air pressure with the two intake fans? How will you keep it from leaking smell? You may be better off with passive intakes and a carbon filter exhaust.

I nominate.....Petflora!

Would cycling the water through a fish tank work to break the bonds? Sounds like a simple way to keep water on hand.

Im having a hard time finding the right driver for my far red epistars. The vf is 1.8-2.1v and I would like to power three of them for 5 minutes at 700ma. Anything easily available in that range?

It's there any danger running large amounts of light per sq. ft.? My flower area is tiny, 18"w x 12"d x 29"h. I have two cxa-3070 AB with two meanwell hln-80h-42b drivers. I went a little overboard on the lights so I could use them for future upgrades. I could possibly hook up some co2 if it...

I have a similar plan but I was going to mount the heat sink with the fins and fans on the outside of the cabinet and the cob side sealed inside. This would reduce the air inside dramatically and increase the headroom by not using a tube inside.

"Bulletproof Coffee" One tablespoon coconut oil One tablespoon butter Coffee Blend till it looks like coffee with cream in it. Substitute which ever oil has the green in it.

How about building a box around the heatsinks with holes on either end for a cool-tube style setup?

I will be mounting a heatsink to the ceiling of my micro cab. Fins and fans on the outside and the lights on the inside. This will allow me to run them hotter and harder with my limited airflow stealth situation.

Can you mount your heatsink fins outside the room? If you can dissipate some heat to the non-sealed side you can dramatically lower the inside temps. Lights at the very top or a false ceiling and bring the plants up to them.