Co2 monitor sensor ppm reading

jack06041989

Active Member
Get a co2 ppm meter and figure it out.. I have 2 air-airconditioners one is a duel hose the other is a single hose both running in the same tent and I haven't noticed a drop off of ppms the single hose is outside of the tent completely and I have a vent hose running into my tent thats attached on the blower
I got the co2 monitor and controller on the way. So your single hose goes into your grow area ? Is it sealed ? And how’s the air pressure ?
 

getogrow

Well-Known Member
So maybe I could put it in the wall and have a small extraction fan on the ceiling above where the ac is and vent it into the attic? Do the window ones blow hot air out or does the back of the unit juts get hot?
The window ones blow extremely hot air out the back. Thats why i said a 10 or 12" fan. Vortex style. There is way too much heat for the way you are talking.
 

jack06041989

Active Member
The window ones blow extremely hot air out the back. Thats why i said a 10 or 12" fan. Vortex style. There is way too much heat for the way you are talking.
Yea probably not ideal I have a separate smaller unsealed grow room opposite my main sealed one so it will prob juts throw loads of heat in there shuck I don’t want lol
 

jack06041989

Active Member
The quicker you get this figured out jack , the quicker ill be running co2... hurry up! nah , im kidding. im ready but dont even know where to start besides sensor and tanks/burners.
I’m trying bud lol! Think guna juts stick with my ac I have now and see how the positive pressure plays out. If I can keep my ppm high and don’t burn through co2 too quick then il be happy
 

jack06041989

Active Member
I've never heard about negative vs positive on the health of plants. Negative pressure is better for smell control though if you have it on a scrubber. I have a scrubber inside of my tent to recirculate the air so it keeps the smell in check
May have to do this, do you juts have the scrubber freestanding in there or do you hook an exhaust fan up ?
 

MadCap_Mcgivver

Active Member
I have my 8000btu a/c window unit various settings setting up inside my 3x6x9 closet hydro grow I'm using a 1000w de hps with inline ducting and a exhaust fan. I noticed when I run it on a lower setting it doesn't put much heat out the back but in that space it regulates its on temperature with the while keeping the room cool but it's up out from the wall in the back.
 
Top