WoldofWeedcraft
Well-Known Member
For the CFL fixture wiring i bought a cord with a plug from walmart. It's like the type cord you would wire for a lamp (just pos and neg, no ground). Get some wire nuts and electrical tape and you're pretty much golden. Also, make sure you get at least 42 watts, and i mean REAL watts not equivalent. It's good to mix the spectrum (i.e. red/orange mixed with blue/violet) but most stores i've seen have only orange spectrum for the 42 watters. For changing the water, you can fill a bucket or a pan with water (pref. a 1 gal) and take the top off of the AG and rest the roots in your bucket/pan. Clean your resevoir good, but the top back on and add the water. I tried adding the nute tablets two diff ways: 1. Just drop the tablet in the water. 2. Crush the tablet and add the powder to the water. Crushing the tablet actually left more "residue" in my resevoir (i.e. it didn't all dissolve), and dropping the whole tablets in seemed to be more efficient in terms of solubility. You can try your own methods and let us know also, but I don't think it really matters whether or not you dissolve the tablets before adding the water. If you were using your own hydro nutrients, yes, you would do it this way to mix everything properly and take pH, but with the AG tablets, they are designed to just be placed in the water, pH gets adjusted automatically and you're good to go. You want to consider using an airstone also. As far as trimming, i'm no expert. I usually pull of the brown leaves as they die, but I really don't cut anything b/c it can cause stress that may turn your ladies into hermies. If you are using clones and you plan to top your plant, I would read up on that before doing it.