Victor Vaperight
Member
this Magic vapor gummi ... is that a flavoring or a 0 nig juice? link?
Thanks
http://www.puffmajicvape.com/
this Magic vapor gummi ... is that a flavoring or a 0 nig juice? link?
Thanks
Just as an FYI. Mt. Baker Vapor allows you to choose your PG/VG ratio and nicotine on all their flavors. Plus they are cheap if you order the large size. So you can pick a flavor, say zero nicotine and all PG. I use their Berry Creamy, Caramel Coffee and Coconut Cookie.
It is by volume when the oil is in a liquid state.
Correction: looked at my bottle and it says 1 ml per gram. I personally do everything by volume but I only use 1 drop of EJ per ml and go PG from there,
I have never made or used BHO, butI developed my method with a buddy and he hd made some. He used some more EJ, don't know exactly. But if fully purged, I don't see why it would behave differently.
What I do is get my oil in a pyrex shot glass type thing. I melt it on a coffee warmer. There is usually not enough for me to get a good measurement on it in there and it is too thick to easily get into a syringe. So I add in 1 ml of ethanol to thin it out and suck it up into a syringe. I then put it into a glass dropper bottle. So if there was 4 ml total, I know I have three of oil. I put it on the coffee warmer to purge off most of the ethanol. A little left doesn't worry me.
From there I have a electric mini hand mixer that works perfectly inside the dropper bottle (great mixing and the tapered top makes for no splatter). I say this because I do not know if that mxing is somehow helping me to be able to use such small amounts of EJ. But I add in the one drop, mix for about ten seconds, and then add the PG and mix some more.
My mix does not separate. I have had some as long as 90 days I would guess...
Having the oil in the 30 ml bottle that is narrow makes it easier to mix in vs if I was still in someting where the oil just barely covers the surface.
http://www.amazon.com/Norpro-Cordless-Mini-Mixer-Piece/dp/B000E39LYO/ref=sr_1_2?ie=UTF8&qid=1439049304&sr=8-2&keywords=mini hand blenderhttp://www.amazon.com/Norpro-Cordless-Mini-Mixer-Piece/dp/B000E39LYO/ref=sr_1_2?ie=UTF8&qid=1439049304&sr=8-2&keywords=mini hand blender
The attachment is the one that just looks like a pole. When it spins, the sides open up (you can't tell the end is split in the pic).
EJ Mix is on Amazon as well. I am not sure that it will work once already suspended in PG. I add the EJ to the oil and then the PG.
Good to see you back GG!!
I have never made or used BHO, butI developed my method with a buddy and he hd made some. He used some more EJ, don't know exactly. But if fully purged, I don't see why it would behave differently.
What I do is get my oil in a pyrex shot glass type thing. I melt it on a coffee warmer. There is usually not enough for me to get a good measurement on it in there and it is too thick to easily get into a syringe. So I add in 1 ml of ethanol to thin it out and suck it up into a syringe. I then put it into a glass dropper bottle. So if there was 4 ml total, I know I have three of oil. I put it on the coffee warmer to purge off most of the ethanol. A little left doesn't worry me.
From there I have a electric mini hand mixer that works perfectly inside the dropper bottle (great mixing and the tapered top makes for no splatter). I say this because I do not know if that mxing is somehow helping me to be able to use such small amounts of EJ. But I add in the one drop, mix for about ten seconds, and then add the PG and mix some more.
My mix does not separate. I have had some as long as 90 days I would guess...
Having the oil in the 30 ml bottle that is narrow makes it easier to mix in vs if I was still in someting where the oil just barely covers the surface.
Ok, so I tried the PM 42 Degrees with kush wax. It blows away the prefills! Love the taste and was super easy. Did .5 to 30 drops. I meant to do fewer drops but glad I didn't. 3 good hits and a few minutes and I'm feeling fine! My friends really liked it to.
I have never made or used BHO, butI developed my method with a buddy and he hd made some. He used some more EJ, don't know exactly. But if fully purged, I don't see why it would behave differently.
What I do is get my oil in a pyrex shot glass type thing. I melt it on a coffee warmer. There is usually not enough for me to get a good measurement on it in there and it is too thick to easily get into a syringe. So I add in 1 ml of ethanol to thin it out and suck it up into a syringe. I then put it into a glass dropper bottle. So if there was 4 ml total, I know I have three of oil. I put it on the coffee warmer to purge off most of the ethanol. A little left doesn't worry me.
From there I have a electric mini hand mixer that works perfectly inside the dropper bottle (great mixing and the tapered top makes for no splatter). I say this because I do not know if that mxing is somehow helping me to be able to use such small amounts of EJ. But I add in the one drop, mix for about ten seconds, and then add the PG and mix some more.
My mix does not separate. I have had some as long as 90 days I would guess...
Having the oil in the 30 ml bottle that is narrow makes it easier to mix in vs if I was still in someting where the oil just barely covers the surface.
I finish purging the ethanol and then mix in my EJ. Then I add my PG and mix again.
I don't know what impact adding the other stuff in would have on the purge. The only reason I add the extra in is to suck it up and get it into a normal glass dropper bottle. It helps with the measurement as well, but I could eyeball that if I wanted to.
Not sure what you mean by "reduced". Oh wait, you must be a foodie chef type too, as in making a reduction. So technically I guess purging out the ethanol is making a reduction....
Hi growing dad iSnaps, 1:1 PG to oil with no separation after months? He isn't talking EJ Mix.