First grow 1 bag seed 9 WW

Veilside420

Veilside420

Active Member
So here is a question for all the experts out there... the inside dimensions of the fridge I am using is 30wide x 25 deep by 5foot tall... I am using a dwc setup and I cant decide how many plants I should put in there... I am using 12 26w 2700k clfs...
 
T@ll T33

T@ll T33

Well-Known Member
between 4 and 6 just keep your light high away so they stretch out insead of branch out since you have 5 foot in height to work with
 
Veilside420

Veilside420

Active Member
T@ll T33 said:
between 4 and 6 just keep your light high away so they stretch out insead of branch out since you have 5 foot in height to work with
Click to expand...
Alright thanks man!!!! One more question for you... how deep do you think I need the rubbermaid thing to be? I have a deep one that is like 24long x 18wide by 18 deep or a 30long x 24wide by 14 deep? Not sure wich to use... I should have pics up tomorrow of the almost finished fridge... well minus the DWC setup cause I dont have clones to put in it...
 
T@ll T33

T@ll T33

Well-Known Member
well the 18inch deep is very good becasue the other one is 30 long hard to get out once put....
 
Veilside420

Veilside420

Active Member
T@ll T33 said:
well the 18inch deep is very good becasue the other one is 30 long hard to get out once put....
Click to expand...
Roger that man... I'll take back the other one today... Also I ordered my clay stones/nutes/rockwool plugs/ ppm meter today from htgsupply.com!!! should be here in a few days!
 
Veilside420

Veilside420

Active Member
How long do I need to wait or rather how tall should my babies be before I can pull some clones off them...

Also I need to sex them... can I just go 12/12 with the daylight bulbs or do I have to change them all to 2700k just till they show sex?
 
Veilside420

Veilside420

Active Member
Grr so I just tried a test run with my dwc setup and the weight of the water was to much for the rubber maid thing and it made the bottom of it flex and that made the epoxy I used to hold the bubblers down come loose... any ideas??? I have so good plastic epoxy but Im not sure were to attach the damn things cause they are 14 inches long... maybe a screw through the bottom of it?
 
Veilside420

Veilside420

Active Member
B to the ump....

Im goin gout shopping soon to try and find a solution to this problem... Anyone have any ideas?
 
T@ll T33

T@ll T33

Well-Known Member
i think ( not to up on hydro ) air stone is suppose to stay lon the bottom of the tub but the air pump bubbler is out not sure what your talking about really


i would change a few of the 6500k to add a mix sectrum of 6500k and 2700k
 
Veilside420

Veilside420

Active Member
T@ll T33 said:
i think ( not to up on hydro ) air stone is suppose to stay lon the bottom of the tub but the air pump bubbler is out not sure what your talking about really


i would change a few of the 6500k to add a mix sectrum of 6500k and 2700k
Click to expand...
I have a air pump hooked up to 2 14 inch air stones and I need to attach the air stones to the bottom of the container somehow...

The epoxy was holding it but when I filled it up with water the weight made the bottom flatten out a bit wich in turn made the epoxy come loose.
 
Veilside420

Veilside420

Active Member
So I have the fridge and dwc setup built(Ill have pics tomorrow) But I have a question about the dwc...

How much bubbles do I need? I have a pump from walmart that claim to handle 30-60 gallons and 3 14inch airstones also from walmart.. And oyea the rubbermaid container I used is 20 gallons and its 18 inches tall... And I plan to grow 5 3 foot plants in this setup.
 
Veilside420

Veilside420

Active Member
Calling all growers that have ever used a DWC setup... Please!!! I need some help here... are 3 14inch airstones enough for a setup this size? I am starting plants in it tomorrow...
 
You must log in or register to reply here.
Top