lusidghost
Well-Known Member
I don't know about that. My old vacuum pump oil for my oven always smells like super dank when I change it out.
Hash and Oil Picture Thread
- Thread starter Sirdabsalot462
- Start date
BobCajun
Well-Known Member
Okay, so what terpene boils at about 70 C. Rosin pressing actually subjects the resin to higher temps than me microwaving until resin chips melt. There's a lot a terpene freaks around these forums. It's good to have some, for aroma and flavor, but some people are getting ridiculous about it. Here's a list of cannabis terpene BPs, which ones are below the melting point of resin chips? Face it, my extraction procedure produces the best product, all things considered. It looks good, it smells and tastes good, it's convenient to handle, unlike gooey type products. It doesn't shatter into a bunch of tiny shards when you break a piece off, like the aptly named shatter, it's smooth smoking and doesn't cause coughing, it doesn't put VOCs into the atmosphere, and it contains no solvent residue. It's also tricky enough to prevent noobs from being able to produce it, making it an exclusive product. Do you have a cookie? No, and neither does Thundercat, so there's your proof, only the elite have access to cookies, meaning me. That's pretty exclusive right there.
Last edited:
natureboygrower
Well-Known Member
Thundercat
Well-Known Member
I suppose I took it as an insult because you quoted me, and seemed to be directly talking to me in response to my previous post. That has nothing to do with personal interpretation..... I've shared the basics of the tech I use with people for years. It's posted on my thread and in my signature line. One difference between you and me though is that I don't try to take credit for anything special. I simply adapted proven techniques into a process that works very well for me and the countless people that have followed that process and came back thanking me for helping them create some of the best extracts they have ever had.
I don't make a point of agitating others or situations, but I also don't hesitate to speak my mind. I do however try my best to do so politely so I don't make posts like yours.
The fact that you don't realize that there are terpenes evaporating even in your grow room when temps get too high says it all. I'm really glad you think your product is something special man and that it makes you "elite".
I don't need your cow patty tech to feel elite, I'll just keep smoking dank terpy flowers, delicious concentrates and enjoying life.
lusidghost
Well-Known Member
It looks like you’ve got it all figured out. Bottom lighting and microwave cookies are the future.
BobCajun
Well-Known Member
Only if you want double the yield and highest quality extracts, otherwise maybe not.
Last edited:
BobCajun
Well-Known Member
So you think the above does not sound like you being a "dick"? First you called my resin cookie a "cow patty" then you said I was "fucking around for no obvious gain", then you topped it off by referring to my process as "playing around". And now you point me to your technique on another thread and I look at it and it's the crudest thing I ever saw. You talked about ME fucking around for no obvious gain, wtf were you doing there, squeezing out filters and shit, I don't even use filters because it's not necessary the way I do it. You're the one fucking around for no obvious gain, far as I can see. And then it came out looking like normal extract. You're a real piece of work, Thundercat.
Last edited:
Thundercat
Well-Known Member
Yep I pointed you to a straight forward proven technique for extracting oil from the trichomes of cannabis plants. No fucking around at all and most of the work done in just minutes 
.
Did you ever see me tell you to stop doing what you want. Yeah I think you are wasting time, “playing” with your extract. But I don’t care what you do with your time. I only posted the statement in hopes you might offer some ACTUAL insight into why you think this technique is so “elite” and special. You’ve been posting repeatedly about how amazing the tech is, and how amazing of a grower you are because of your special things you do. I figured everyone would love to learn the most they could about your special tech. Sadly I don’t think that will happen.
. Did you ever see me tell you to stop doing what you want. Yeah I think you are wasting time, “playing” with your extract. But I don’t care what you do with your time. I only posted the statement in hopes you might offer some ACTUAL insight into why you think this technique is so “elite” and special. You’ve been posting repeatedly about how amazing the tech is, and how amazing of a grower you are because of your special things you do. I figured everyone would love to learn the most they could about your special tech. Sadly I don’t think that will happen.
lusidghost
Well-Known Member
There’s no chlorophyll on the underside of leaves. “Double the yield” is hilarious.
I will say you did a good job of scrubbing the chlorophyll for your hashish, but it looks like it’s very high in lipids.
BobCajun
Well-Known Member
Isn't it fucking obvious that resin with all water solubles and solvent washed out of it is going to be superior to unwashed crude extract?Yep I pointed you to a straight forward proven technique for extracting oil from the trichomes of cannabis plants. No fucking around at all and most of the work done in just minutes
Did you ever see me tell you to stop doing what you want. Yeah I think you are wasting time, “playing” with your extract. But I don’t care what you do with your time. I only posted the statement in hopes you might offer some ACTUAL insight into why you think this technique is so “elite” and special. You’ve been posting repeatedly about how amazing the tech is, and how amazing of a grower you are because of your special things you do. I figured everyone would love to learn the most they could about your special tech. Sadly I don’t think that will happen.
BobCajun
Well-Known Member
So I just imagined that I've been getting a pound from a 3' x 1.5' area since I added bottom lighting whereas I was getting about half that before? Damn, my imagination is remarkably realistic. And your ass looks like it's very high lipids. There ain't no lipids in my cookies, Ghosty, that's why they crystallize, unlike your lipidy gunk.
lusidghost
Well-Known Member
My sand looking shatter? Removing lipids and moisture is what stabilizes hash. IE doesn’t crystallize / wax up.
I’m glad that you’re getting better yields. I would credit that to many variables like genetics or less grower error instead of suntanning your plants beyond their bikini line.
BobCajun
Well-Known Member
So you don't believe that shining light upward from the top of the pots won't increase weight, because plants don't have chlorophyll on their undersides? Have you heard that leaves can turn toward a light source? I know it's shocking, but nonetheless true. It's fucking OBVIOUS that bottom lighting will produce higher yield by eliminated shading. But of course you never thought of that, you were like "it being dark down there on the whole bottom half of my plants is having no negative effect on yields, plants love shade, it makes them grow more".
And there's no lipids in my cookies because the extraction is done with alcohol in freezing temperatures, which means waxes don't even get dissolved. I tested it by leaving the alcohol/resin mixture in the freezer for 2 days and not a damn thing precipitated. But f you dissolved your sand shatter in alcohol and left it in the freezer for 2 days there would be a bunch of precipitate, try it and show the results, which you won't. That ain't wax crystallizing in my cookies, it's pure THCA. Your extract doesn't crystallize because there's too much lipids and albumen in it and water soluble stuff, like aflatoxin.
Last edited:
lusidghost
Well-Known Member
lusidghost
Well-Known Member
There is no "dark down there." I scrog and defoliate. Leaves turn towards the light, which is upwards.
lusidghost
Well-Known Member
You're a goofball.
BobCajun
Well-Known Member
So what's your yield per sq ft?
BobCajun
Well-Known Member
That's your response to "it's pure THCA"? Okay, Professor.
cancerkiller
Well-Known Member
i started making 190 everclear extracted "rso" over 7 years ago for my 3 months to live cancer prognosis.
obviously as i type this, it must be working.
i've graduated from rso to pressing whole decarboxylated flowers.
i take between 1200 to 1600mg daily depending on my supply of pills. 1600mg, 4/400mg preferred.
anyway, the next experiment, and i just ordered it, is this french pollen extractor for $120.
i've got about a half pound of whole flower decarbed and i'm gonna try and dry sift this decarb flower.
when u have been consuming the extract of a pound of quality flowers every month for over 7 years, u look for cleaner diy home processing.
hate cbd.
on decarbing, go to https://ardentcannabis.com/blog/decarboxylation-myths/
and she has a little machine.
now this is broscience from me, when i decarb, in the old days i tightly sealed the container with aluminum foil to keep the terpenes from escaping until the container reached room temp.
if ur making medicine for like terminal cancer, making the extract isn't the hard part.
taking the extract is a skillset that few possess.
it's taken me 7 years where taking 400mg of extract is like an aspirin for a human.
so my advice is this for medicinal oral patients trying to kill cancer, consistentcy is the key.
get a pill minder and take ur dose at exactly the same time daily. give up driving a car.
idk if her machine decarbs perfectly or not, but it does seem to seal in the terpenes, speeds up the curing process dramatically, and the results seem to be the same.
so i decarb a bunch of flower and press it all and then suck it up in syringes and then in capsules a week at a time.
start tiny 5mg and work up to 400mg.
obviously as i type this, it must be working.
i've graduated from rso to pressing whole decarboxylated flowers.
i take between 1200 to 1600mg daily depending on my supply of pills. 1600mg, 4/400mg preferred.
anyway, the next experiment, and i just ordered it, is this french pollen extractor for $120.
i've got about a half pound of whole flower decarbed and i'm gonna try and dry sift this decarb flower.
when u have been consuming the extract of a pound of quality flowers every month for over 7 years, u look for cleaner diy home processing.
hate cbd.
on decarbing, go to https://ardentcannabis.com/blog/decarboxylation-myths/
and she has a little machine.
now this is broscience from me, when i decarb, in the old days i tightly sealed the container with aluminum foil to keep the terpenes from escaping until the container reached room temp.
if ur making medicine for like terminal cancer, making the extract isn't the hard part.
taking the extract is a skillset that few possess.
it's taken me 7 years where taking 400mg of extract is like an aspirin for a human.
so my advice is this for medicinal oral patients trying to kill cancer, consistentcy is the key.
get a pill minder and take ur dose at exactly the same time daily. give up driving a car.
idk if her machine decarbs perfectly or not, but it does seem to seal in the terpenes, speeds up the curing process dramatically, and the results seem to be the same.
so i decarb a bunch of flower and press it all and then suck it up in syringes and then in capsules a week at a time.
start tiny 5mg and work up to 400mg.
Attachments
Last edited:
northside novis
Well-Known Member
Heart up a butter knife on a gas burner or can even use stove element (I use the top of a can bend either side so as to make a sort've shield to contain the heat& enable knife to get red hot quickly then get a wee dolip of your lovely Goldy's on the end of a needle (sme ppl use wire bread tie) stick it on hot knife using a small piece of straw to inhale the snook