Smoke it faster. That is beautiful but it does not keep.I used this kief from my old grinder that I never touched for at least two year of owning it. (I gave my son half of the kief, but it was still a ton.) Then I lightly heated and compressed it for like an hour in some PTFE film until it became as hard as a rock.
The cool thing about it is it’s made of everything I’ve grown during that period. I haven’t smoked any yet, and I plan on saving it for special occasions.
View attachment 5015060View attachment 5015061View attachment 5015062
My first WPFF extraction.You have to freeze the alcohol to coagulate the lipids and then strain them out. This can be done in the BHO process by freezing a jacked column or packing it with dry ice. and using a ball valve to keep the butane in the column for a long enough to coagulate the lipids before running it through the filters and into the splatter platter. You can filter out a lot of the lipids without the dry ice if you do your run on a really cold night with a tightly packed column.
It's still rock hard, but only about half of it is left.Smoke it faster. That is beautiful but it does not keep.
Actually I do the extraction frozen, inside a freezer, there's no lipids that drop out. I tried leaving it in the freezer for 2 days and not one bit of precipitate. I actually forgot about that when I replied to the post saying my extract would have lipids in it like BHO extract. No lipids and no anything that's either water soluble or soluble in about 20% alcohol. It's a lot cleaner than BHO, making it almost 50% more potent, and it's even more cleaner than pressed rosin, which is the crudest of extracts. It's solventless, yeah, but dirty, usually being about 57% THC/A. Mine is solventless too, at the end. But my process is a little more complicated and takes about 4 days so I doubt if anybody else would do it. Granted, distillate would be even purer but who wants to buy a vacuum distillation apparatus, not me. My apparatus is a water jug and a couple 2 liter glass measuring cups. I really wouldn't smoke BHO or rosin, but different people have different standards, apparently some people are fine with those products.You have to freeze the alcohol to coagulate the lipids and then strain them out. This can be done in the BHO process by freezing a jacked column or packing it with dry ice. and using a ball valve to keep the butane in the column for a long enough to coagulate the lipids before running it through the filters and into the splatter platter. You can filter out a lot of the lipids without the dry ice if you do your run on a really cold night with a tightly packed column.
You're just making up numbers. Liquid butane is much colder than alcohol in your freezer. I run mine through a coffee filter trap into a 2.5 micron filter paper. Then I degas for several days in a scientific grade vacuum oven. It typically turns of glass by the time I pull it out. Lipids are a wax. You have a ball of clay that you put into a microwave.Actually I do the extraction frozen, inside a freezer, there's no lipids that drop out. I tried leaving it in the freezer for 2 days and not one bit of precipitate. I actually forgot about that when I replied to the post saying my extract would have lipids in it like BHO extract. No lipids and no anything that's either water soluble or soluble in about 20% alcohol. It's a lot cleaner than BHO, making it almost 50% more potent, and it's even more cleaner than pressed rosin, which is the crudest of extracts. It's solventless, yeah, but dirty, usually being about 57% THC/A. Mine is solventless too, at the end. But my process is a little more complicated and takes about 4 days so I doubt if anybody else would do it. Granted, distillate would be even purer but who wants to buy a vacuum distillation apparatus, not me. My apparatus is a water jug and a couple 2 liter glass measuring cups. I really wouldn't smoke BHO or rosin, but different people have different standards, apparently some people are fine with those products.
Mad props bro!you must have a built a better setupView attachment 4457650
Color remediation cartridge removes the chlorophyll, pesticides, and other impurities. Uses clay and other powders for filtration. I only need to use it on my older harvested material.I haven’t been keeping up with the new teks, what’s CRC mean ?
I'm not against the concept, but I don't worry about the color or let my material get old enough to buy one. Does it really strip the terps? If so that's reason enough to stay away.Man I sure wish! I'm trying to find anything from anytime to help me make or use one.
Damn dude that's some straight Alien looking shit! I've got a few guesses of the methods used. But so fresh and so clean Fo Sho!some solventless stuff we been working on.
hope y’all are doing great
View attachment 5080814View attachment 5080815View attachment 5080816View attachment 5080817
I’ll take the guess work out for you… fresh frozen washed 45-119u pressed at 210f in a 25u bag then jarredDamn dude that's some straight Alien looking shit! I've got a few guesses of the methods used. But so fresh and so clean Fo Sho!
That was my guess, well not the specific microns but I figured ice water wash and press. Gorgeous stuff man!I’ll take the guess work out for you… fresh frozen washed 45-119u pressed at 210f in a 25u bag then jarred
Do you freeze dry and then press?I’ll take the guess work out for you… fresh frozen washed 45-119u pressed at 210f in a 25u bag then jarred
YesDo you freeze dry and then press?