Renfro
Well-Known Member
Just put a little water in the bottom of the tray, just enough to cover the slots in the tray, then with the dome on top the water will condense on the dome and rain back down. I change the water out daily.
Having hell cloning..
- Thread starter DoubleAtotheRON
- Start date
DoubleAtotheRON
Well-Known Member
Whatcha think about a setup like this?
Attachments
kovidkough
Well-Known Member
ty
PagingMrHerman
Well-Known Member
I’ve always had great results with rock wool and dome but it takes some work and can get finicky.
Terrible results with the clone king. Don’t know why. Gave up with it.
For shits I’ve been putting cuts in a glass of water and every one roots no problem. Turned out to be the easiest most maintenance free way of getting roots. Give it a try.
Terrible results with the clone king. Don’t know why. Gave up with it.
For shits I’ve been putting cuts in a glass of water and every one roots no problem. Turned out to be the easiest most maintenance free way of getting roots. Give it a try.
MICHI-CAN
Well-Known Member
In my opinion you are missing the chlorine in municipal water. Wasted time and money on the fancy toys in the past. Just a starter tray, coco/seed starter mix, 5.8 - 6.0 tap water, a dome, a heat mat with control, rootone, and an 18watt t-5. Almost always 100%.
Best of luck. Should be easy.
Best of luck. Should be easy.
![IMG_0149[1].JPG](/data/attachments/3875/3875515-dd5fa4ee0bb1a76a0b2224c20c560ed4.jpg)
DoubleAtotheRON
Well-Known Member
Decisions, decisions.... I gotta get something quick and try again. We're taking down a harvest right now, and I need to get the next round ready.
MICHI-CAN
Well-Known Member
Sterilize your cloner really good. And make sure to get a growth node in the wet zone. It does help. Sterilize everything involved in the process after every run. It will pay for it's self. Unsanitary growers who say different just are lucky. No chances. Set your self up for success.
DoubleAtotheRON
Well-Known Member
I actually cleaned the shit out of them this time after failing before. Soaked everything in Physan20 overnight, ran the pumps with it, rinsed twice, used fresh pucks, changed the water out twice, used a fresh razor blade. It’s baffling me.
Last edited:
DoubleAtotheRON
Well-Known Member
I guess I’m really also looking for something with less hassle. Pumps, jets breaking... ugh.
7CardBud
Well-Known Member
That's why I switched to the ultrasonic mister. I could use the same gear and ditch the problems with pumps and jets. Just drop the puck in the water and fogetabowdit.
DoubleAtotheRON
Well-Known Member
Got any pics, links to this setup?
MICHI-CAN
Well-Known Member
My technique is my journal. It works. Basic and fairly cheap. Full step by step with pics. Hope this helps. I only promote this method now.
MICHI-CAN's Adventures in Growin' fer Rednecks
I've been asked to share my simple and cheap methods by a few people here and abroad. I'm just sharing my opinion on the hobby. You are more than welcome to share yours. No haters please. I can't type. Am not a photographer. And just want to help others while being helped. So here we go. Current...
www.rollitup.org
Oliver Pantsoff
Well-Known Member
Rapid rooters with 50 spot tray. I use only 25-30 a tray, so they can have room. I soak the rapid rooters in 8ml/GL of hygrozyme for about 10 min. Dip the cut in clonex, plug em in the rapid rooters and you're done. White strong roots guaranteed in 5-10 days. 100% success rate everytime.
OP
OP
Herb & Suds
Well-Known Member
Whenever my ezcloner starts acting slow a shot of REZ Clear has resolved each time
The other thing is , have you replaced your foam inserts ?
I find it best to replace them every few months
The other thing is , have you replaced your foam inserts ?
I find it best to replace them every few months
7CardBud
Well-Known Member
I'm using one of these 20mm models in a 3.5 gallon bucket. It's way overkill and could easily handle a 60 site tote size cloner.
Amazon.com: FITNATE Mist Maker, Upgrade Fogger Water Fountain Pond Fog Machine Atomizer Air Humidifier for Hollowen,with Fogger Ceramics Discs Tools: Home & Kitchen
Amazon.com: FITNATE Mist Maker, Upgrade Fogger Water Fountain Pond Fog Machine Atomizer Air Humidifier for Hollowen,with Fogger Ceramics Discs Tools: Home & Kitchen
DoubleAtotheRON
Well-Known Member
Ive used brand new ones every time. This last try I just added plain water and a couple drops of Physan20
