Heisenbeans Genetics

Status
Not open for further replies.
whytewidow

whytewidow

Well-Known Member
nc208 said:
Have you seen these guys?
https://atreumlighting.com
Those min boards the 144.2's look like you could make a nice light, run each up to 60w with no heatsink. I'm gonna build another light using these I think. Grabbing a 2nd tent prob a 4x4 and think 12 could work nicely. That'd be 700w with no heatsink. Grab some alum strips to mount it all up and your all set for under 500.
Click to expand...
Yeah atreum is legit. But honestly if I was you. You can get cheaper boards more diodes through Alibaba. If your going for saving money. But atreum are good boards.
 
nc208

nc208

Well-Known Member
whytewidow said:
Yeah atreum is legit. But honestly if I was you. You can get cheaper boards more diodes through Alibaba. If your going for saving money. But atreum are good boards.
Click to expand...
F*ck Alibaba and those scammers, been there done that got sold fake lm561c by this roget dude from mufue lighting last summer. I'd rather pay a bit more and not have to go through that crap again. Just what I had to deal with.....

I've bought legit lm301bs and vero 29 CS since and love them.
 
Last edited:
V256.420

V256.420

Well-Known Member
Why do I get this funny feeling that as soon as these packs go up for sale they will vanish in 10 minutes. Hopefully a system will be in place so one guy doesn't scumbag everyone and try to buy everything up. Shit, I was promised packs 6 months ago when I originally brought up the idea in a pm to Heisen.

Please save us slow old guys some S1's thx Heisen.
 
S

smashcity

Well-Known Member
20190205_221408.jpg 20190205_221511.jpg 20190205_221542.jpg 20190205_221500.jpg 20190205_221613.jpg

Does anyone know if these are good LEDs? A buddy gave me this but never used it cause of the wires as I'm not sure if I can get someone to get a 110v plug to it so i can plug into standard socket. I don't know shit about electrical stuff. Is this even capable of being repaired to fit a 110v socket? Sorry for getting off topic.
 
Heisenbeans

Heisenbeans

Well-Known Member
whytewidow said:
H INFLUX_L09 STRIPS best on the market right now. Part # B8T4N90LAWW those are 4k. Work amazing for veg. I'd run 16 over that space. Each strip put 72w 48vdc at 1500mA 1152w or drop em down to 1000mA 48w per strip for 768w two hlg600h drivers. Will blow almost everything outta the water. You will like them better than your cob setup. I'd almost bet. And using the 4k ones you can switch to flower with it if you decide later on down the road.

Two groups of 8. You can put them on cheap alum U channel from lowes or hempdepot, a roll of thermal tape from Amazon. Stick it on the back of the strip. Then stick it to the U channel. Then use alum angle on each end to hold them together. Or if you wanna b fancy get t20 sticks from tnutz like growmau5 uses. For your end bars
Click to expand...
I dont want that much wattage for 1 day old clones and weaeklings. They stay in that box a maximum of 2 weeks before getting moved to a flood table. I was thinking more like 500.watts total
 
Heisenbeans

Heisenbeans

Well-Known Member
V256.420 said:
Why do I get this funny feeling that as soon as these packs go up for sale they will vanish in 10 minutes. Hopefully a system will be in place so one guy doesn't scumbag everyone and try to buy everything up. Shit, I was promised packs 6 months ago when I originally brought up the idea in a pm to Heisen.

Please save us slow old guys some S1's thx Heisen.
Click to expand...
I'm gonna go through this entire thread and make a short list. Also going through all my messages.
Everyone who stood behind me from the get will not be forgotten. That's how I roll.
 
Heisenbeans

Heisenbeans

Well-Known Member
6 of these at 1050 mA will be around 500 watts total which I think is perfect.
They are out of the 132 boards in anything over 3200k. I can get those in 5000k with the slate heat sinks already ready to roll. Wire em up in series and be done with it. Put them 7 inches apart and I can get 6 in a 2x8 perfect. Would be 7 inches from the long walls and 6 on each side of the boards. I imagine the footprint would be on time.

https://horticulturelightinggroup.com/products/qb288-v1-slate-2-single-combo?variant=12433536778289
 
whytewidow

whytewidow

Well-Known Member
Heisenbeans said:
I dont want that much wattage for 1 day old clones and weaeklings. They stay in that box a maximum of 2 weeks before getting moved to a flood table. I was thinking more like 500.watts total
Click to expand...
That's only 31.25w per sqft at 500 watts. You're probably gonna be disappointed. Strips and QBs are not the same as cobs. You're gonna shit for actual penetration. You're gonna have set those as close to the plants as you possibly can. Plus your in an open space. I'm just a hair over 45w sqft in a space with reflective walls. And sometimes I wish I had a tad more.

Edit: the difference is being in an open space. Of you had reflective walls I'd say 500 would be good. But you're not. Open space you're gonna need more than 500w. But hey, ain't my space. Good luck.
 
Rivendell

Rivendell

Well-Known Member
smashcity said:
View attachment 4277492 View attachment 4277493 View attachment 4277494 View attachment 4277495 View attachment 4277496

Does anyone know if these are good LEDs? A buddy gave me this but never used it cause of the wires as I'm not sure if I can get someone to get a 110v plug to it so i can plug into standard socket. I don't know shit about electrical stuff. Is this even capable of being repaired to fit a 110v socket? Sorry for getting off topic.
Click to expand...
Should be able to grab a new three prong male plug at any hardware store for a couple of bucks and be ready to go.
 
whytewidow

whytewidow

Well-Known Member
smashcity said:
View attachment 4277492 View attachment 4277493 View attachment 4277494 View attachment 4277495 View attachment 4277496

Does anyone know if these are good LEDs? A buddy gave me this but never used it cause of the wires as I'm not sure if I can get someone to get a 110v plug to it so i can plug into standard socket. I don't know shit about electrical stuff. Is this even capable of being repaired to fit a 110v socket? Sorry for getting off topic.
Click to expand...
Those are 134lm/w to 154lm/w not super good but not super bad either. For free. I'd run them. They came from a highbay light fixture. Called the airflex and airflex 2. They are just regular smd 2835 0r 3528 diodes.

They are more for lighting factories n whatnot. But they would veg pretty good.

Screenshot_20190206-091319_Drive.jpg Screenshot_20190206-091338_Drive.jpg
 
Heisenbeans

Heisenbeans

Well-Known Member
whytewidow said:
That's only 31.25w per sqft at 500 watts. You're probably gonna be disappointed. Strips and QBs are not the same as cobs. You're gonna shit for actual penetration. You're gonna have set those as close to the plants as you possibly can. Plus your in an open space. I'm just a hair over 45w sqft in a space with reflective walls. And sometimes I wish I had a tad more.

Edit: the difference is being in an open space. Of you had reflective walls I'd say 500 would be good. But you're not. Open space you're gonna need more than 500w. But hey, ain't my space. Good luck.
Click to expand...
Naw man at 51 volts X 2.1 amps that's over 100 watts per board. 6 boards is almost 700 watts in a 2x8. But I dont need that much light for 2 day old plants to 3 weeks max. That's still 40 watts per square foot which is what I'm using now on the big cob setups and killing it.
I'm not vegging these plants past 6 nodes
The boards made more sense cause they come with the slates. I dont have put a ton of shit together.
 
Greenthumbs256

Greenthumbs256

Well-Known Member
Heisenbeans said:
6 of these at 1050 mA will be around 500 watts total which I think is perfect.
They are out of the 132 boards in anything over 3200k. I can get those in 5000k with the slate heat sinks already ready to roll. Wire em up in series and be done with it. Put them 7 inches apart and I can get 6 in a 2x8 perfect. Would be 7 inches from the long walls and 6 on each side of the boards. I imagine the footprint would be on time.

https://horticulturelightinggroup.com/products/qb288-v1-slate-2-single-combo?variant=12433536778289
Click to expand...
you seem to know a lot about the led game, and are pretty upfront about shit!

to run my 4x8 I wanted 2 hlg 600, prebuilt with dimmer knobs coming in at just about 760$ each, if you were me, what would u run, and it has to be pre built! can't chance fucking it up, and losing that much cash, this bill is really putting a hurting on me! but it's a must! temps are kicking my ass right now, even in winter!
 
Greenthumbs256

Greenthumbs256

Well-Known Member
I just don't get all that shit, it might as well be in Chinese! makes zero sense to me! I get watts, and I get color spectrums, but that's it, micro jewels, and all that other shit us just way over my head! but now u wanna talk about biology or astrophysics, we can hold a hella conversation lol, I'm not stupid by far, that shit just don't sit well with me!
 
Status
Not open for further replies.
Top