LED strip gurus around here? Stop by and check out this vertical setup that needs tweaking!!
- Thread starter Sir420
- Start date
Airwalker16
Well-Known Member
240s and lower don't dim to 0%, just FYI.
OLD MOTHER SATIVA
Well-Known Member
i would need the item number or link...
OLD MOTHER SATIVA
Well-Known Member
See that's only 4 light points which is still great so with 9 I know I can keep even closer... 6 is fine
those are cute..led driptowers /phototron
gr865
Well-Known Member
I have not read everything here but have yet to see any comment on the size of the tent.
You plan on using stationary wire which to attach the plants too?
Have you considered being able to work on the plants, tucking and tying the branches to the wire. You must have some method for working on the plants.
I run a 5 plant vertical in a 4 x 4 and have the ability to remove the plants to work on them. Don't run LED, run two 315W CMH.
Just a couple of pics to illistrate.
The stands.
The plants outside the tent but on the stands.
The plants inside the tent.
A pic showing the plant on the screen, tied back to the screen with soft ties.
Not trying to Hijack your thread but being able to work on them is something you need to consider.
Good luck on your efforts there buddy!
TEKNIK
Well-Known Member
HLG are pretty efficient, I'm more think as you have 3 rows for each of the 9 bars you have 3 separate drivers, it's pretty unknown at this stage exactly how much light you need.
Sir420
Active Member
@gr865 thanks for joining! 
I have a 7foot 6in PVC pipe that will have 72 2in holes ... 4.8'x4.8'x6' is a good picture of canopy size..
Will have garden fencing every 8" from each other... Plant cups tilted not at 45 degrees but more closer to 180 degrees... lights are hanging from top of very sturdy diy tent and dangling down on a manual light track mover.. 9 bars all around easily movable as they will be spinning on a electronic motor...
I have a 7foot 6in PVC pipe that will have 72 2in holes ... 4.8'x4.8'x6' is a good picture of canopy size..Will have garden fencing every 8" from each other... Plant cups tilted not at 45 degrees but more closer to 180 degrees... lights are hanging from top of very sturdy diy tent and dangling down on a manual light track mover.. 9 bars all around easily movable as they will be spinning on a electronic motor...
Sir420
Active Member
3 PLC strips on 6 or 9 1"ALU sheets 6' long
So that's 27 PLC strips per pvc vs 18... Something tells me I might be over doing something here...
Picture this
Sir420
Active Member
But like this
See that's only 4 light points which is still great so with 9 I know I can keep even closer... 6 is fine
Sir420
Active Member
As my LED family knows, narrowing down your components for a diy light can seem overwhelming.. it is almost time for me to start up so now I need to be putting in orders.. I've had a couple ideas shared before to me about the "super" light I'm trying to build.. not sure if it's still the latest tech.. so guys I've got the diy vertical tower garden & want to line LEDs vertically around each PVC (I'll tag a picture)
My lights will be hanging from the ceiling all around it though.. more than 4 light bars per PVC.. my goal is to be more efficient than anything else.. money is not a issue here, I think the Q series strips are still the most efficient strip on the market today??? Not sure.. BUT I will have 2800 flower watts & 4 PVC pipes so that's 700watt per 6' tower.. I don't want to make the mistake of buying the wrong strip. IfIf am trying to maximize efficiency what would you recommend.. thanks in advance.. I'm guessing I'll have to DIY a fixture similar to this
But circular and have leds going all around PVC.. really not like that... More like a light mover racks that shaped like a star to move lights forward or backwards...
More like this but I'll alsobe able to slide them closer or away
But like this hanging from ceiling on light movers so I can bring LEDs closer or back...
Sir420
Active Member
700 watts per pvc tower... 9 bars with 3 strips per bar PLC... Maybe less???
idkk... Always rotating when lights on... Diy should I add ... As far as training they naturally grow up so I will have fencing around PVC first 8" away & then another 6-8in away... I might put it on wheels to make the fencing adjustable as they grow out...
idkk... Always rotating when lights on... Diy should I add ... As far as training they naturally grow up so I will have fencing around PVC first 8" away & then another 6-8in away... I might put it on wheels to make the fencing adjustable as they grow out...
Sir420
Active Member
I will keep a gate fence around the first 8" away from PVC and then add a second layer 16" away from PVC for ultimate vertical scrog like never before .. only thing I will need to do as a Gardener is keep environment in check & manually the only thing I'll have to do is defoliate .. as the plants naturally grow up, the gate will be angled to where I can bend them outward the more I pull the fence to the light...
This took some thinking lol
Sir420
Active Member