Nutrient order

T.H.Cammo said:
I grow in my own version of organic super soil (just add water) so I don't really understand all the additives, let alone why the "order of march" would be so important. The OP wanted to know what difference it would really make "to the plants" - and the best you can come up with is; it makes the solution cloudy? Who cares if the solution is clear or cloudy, that's a difference without a distinction. What's the point?
Click to expand...

There’s more points for you to read when you come back online here farmer Jim. Maybe you’re mixing up a batch of your special super soil and brewing up some teas and don’t have time to respond with your vast knowledge of feeding with liquid salts?
 
i add it at the end.... i could be very wrong about this so someone let me know if im missing somehting...

u just dont want the ph going up too high ... precipitate and all.

i add my nuitrients tio the RDWC.. ph is around 5.8... i add my silica.. like 20ppm... ph goes up to 6.0 basically.... i just add it slowly to it doesnt skyrocket the ph too fast... but ya i thin if u just trickle it in without letting the ph get too high ud be all good...

i dont ever flush my hydro system.. so i couldnt add it first even if i wanted to... this has worked fine to the best of my knowledge but please lemme know if i got a blind spot here
 
It’s better to put the silica in first wait 30 min then add your base and at the end calmag if needed
 
bk78 said:
Silica always first, and calmag last if using silica

youll get a clouded up solution if you add silica and calmag together I’ve always experienced
Click to expand...
I learned the hard way and added ArmorSI last and got the cloudiness. Now I add it before everything else
 
A lot of us don't run CalMag, but we put the Mag Sulfate (epsom salts) in after/with the base, then add the CalNit after that.

In all honesty tho, I do it a bit different..

I use a 3-part dry salt nute, consisting of a base nute (Jacks), epsom salts, and CalNit.

From that I made a "2-part" liquid concentrate @ around 80x strength. Part A is Jacks (3:1) + Epsom Salts (1:1), and Part B is CalNit (2:1)

Next I take a new large container (or a pre-res, if you will) of RO and add sufficient amount of Part A to hit an EC number at or above your final desired EC. Then add an equal amount of Part B. At this point, the goal is to have a concentration that is approx 2x the desired final EC. This is the "nute concentrate".

Then I take another mini-res full of RO water, and add Si to approx double my desired Si ppm. Let sit for 30+ minutes if possible.

Finally I will take these two mini-res (one with nute concentrate and one with Si water), and mix them into my res at whatever ratio I need to achieve final desired EC. At that point my Si ppm is only like 60, so they can play nice together without the risk of cloudiness.

Also at the end I add a bit of Fulvic Acid and Seaweed, and perhaps a hit of PK boost.
 
Last edited:
bk78 said:
There’s more points for you to read when you come back online here farmer Jim. Maybe you’re mixing up a batch of your special super soil and brewing up some teas and don’t have time to respond with your vast knowledge of feeding with liquid salts?
Click to expand...
Well, like I said, I have very little "knowledge of feeding with liquid salts". I thought I made that perfectly clear. What is also clear is that some of the points you refer to, in the above posts, seem a bit comlicated and tedious. I think I'll just stick with simple organics. Have a nice day!
 
You must log in or register to reply here.
Back
Top