Tim Fox
Well-Known Member
Yes I will have four grow boxes , two with early girl tomatoes and one with a pair of bell peppers and one with a pair of jalapenos
SIP thread -- (Sub-Irrigated Planter)
- Thread starter Humanrob
- Start date
Tim Fox
Well-Known Member
Amazing grow , three cheers
GenericEnigma
Well-Known Member
It's hard to say "thanks" because I made so many mistakes, but I'm still smoking my own weed and staying out of dispos!
So thank you anyway!
weedstoner420
Well-Known Member
Nice, I've not used my growboxes outside (too paranoid of bringing bugs inside) but I've grown tomatoes and peppers in them in the tent with great success...
Post some pics if ya feel like it, I dunno if this thread is just for weed or if anything in a SIP is allowed
Tim Fox
Well-Known Member
I don't think anyone would mind a veggie sip picture this summer, I just won't over do it hahaNice, I've not used my growboxes outside (too paranoid of bringing bugs inside) but I've grown tomatoes and peppers in them in the tent with great success...
Post some pics if ya feel like it, I dunno if this thread is just for weed or if anything in a SIP is allowed
weedstoner420
Well-Known Member
Second growbox harvest day, for the remaining Erdpurts. Looking a bit haggard but still made it to the finish line
Gonna start some Ace seeds Ethiopian next but probably won't flower them out til July or August. Until then, happy SIPing to all!
Gonna start some Ace seeds Ethiopian next but probably won't flower them out til July or August. Until then, happy SIPing to all!
weedstoner420
Well-Known Member
I would say the best way to find out is to try it. You'd think for half the amount of soil, you would need half the wicking volume, and if the totes are longer on one direction, it might be better to have one wick at each end (even if they're a bit smaller) rather than just in the middle...
Rocket Soul
Well-Known Member
How much water the wick sucks up from the bottom rez depends on a few factors:
- material of the wick: coco would wick much better than perlite for example.
- how thick the wick is: long and thin eicks less than short and wide.
- distance between the water surface and the bottom of the pot where the wick attaches.
Using net pots seems like somewhat of a mistake to me, they are so short they tend to wick too much. If you want to control how much your wick sucks from the res your best bet is to do a prototype with a fairly long and leaning on thin rather than thick wick and making sure that you can somehow control what level the water sits at.
GenericEnigma
Well-Known Member
Concur.
I use a wicking bed adaptation, and gravel size/shape makes a significant difference there.
Coming at it from the too-large/too-dry side of the balance made it easy to limp along when fine-tuning (just top water a bit). Too wet could be catastrophic.
Rocket Soul
Well-Known Member
Theres a very helpfull document back in the thread posted by hyrootz (i think?) it resumes a lot about perched water tables and wicking in purpose of the ppk system.
Its quite different but the way it describes how media and water reacts is the same.
My 4x8 with my modified grobuckets at about 7 weeks. 50% of the time my brain is trying to come up with a perfectly designed SIP lol. I can’t begin to imagine the hours i’ve spent thinking of this lol. For now i’ll stick with the grobuckets i guess. Does anyone have an automated solution for filling up reservoirs that is reliable and not overly complicated and expensive ? The couple of things i’ve tried have not worked as well as i’d like.
Attachments
weedstoner420
Well-Known Member
Beautiful looking plants!
With that many separate buckets it might be hard to automate watering without getting overly complicated, unless you have an automated way to drain the runoff as well (actively or passively).
I've successfully gone away for a week or so and used a very small aquarium pump (like less than 100 gph) and a digital timer, just guestimating how much water would be needed via trial and error, running something like 2-3 mins every day or every other day. But that was only for 1 or 2 plants, looks like you've got at least 10 in there which is why I say it could get complicated quickly...
Exactly. I’ve done the same thing. It’s a guessing game and i try to not have any overflow/runoff. And with multiple outlets coming off the pump, the flow volume ends up being different on each line it seems. I only need the automation for when i go away just a couple times a year.
weedstoner420
Well-Known Member
Fwiw, I used a pump similar to this. They're cheap enough you could just get one for each SIP if you wanted...
I know some folks have set up float valves in the res for larger SIPs, not sure if that's feasible in 5-gallon buckets, but something to consider at least. The last few years I've just been timing my grows so my tent is either empty while I'm away, or has small plants that can go a week or so without needing any attention.
GenericEnigma
Well-Known Member
Next grow humming along. Got some AKBB genes and a project of mine based on Useful genes.
Pollen is nearly ready - I'll hit one branch of each.
Pollen is nearly ready - I'll hit one branch of each.
sessybudfarmer
Member
Lot of good info! question - I may have overlooked someplace within the 285 pages, approximately how long are the plants top watered until roots get down to the reservoir ?