Spider Farmer And 8 Main Colas Experiment (Mainlining/Manifolding)

Day 20 of flower. Pictures update.
 

Attachments

  • IMG_20200620_235927276.jpg
    IMG_20200620_235927276.jpg
    5.6 MB · Views: 38
  • IMG_20200621_000115748_HDR.jpg
    IMG_20200621_000115748_HDR.jpg
    3.2 MB · Views: 43
  • IMG_20200621_000109608_HDR.jpg
    IMG_20200621_000109608_HDR.jpg
    4.9 MB · Views: 44
  • IMG_20200620_235923603.jpg
    IMG_20200620_235923603.jpg
    6.4 MB · Views: 45
  • IMG_20200620_235919908.jpg
    IMG_20200620_235919908.jpg
    6.3 MB · Views: 46
  • IMG_20200621_000019527.jpg
    IMG_20200621_000019527.jpg
    4.1 MB · Views: 46
  • IMG_20200621_000122915_HDR.jpg
    IMG_20200621_000122915_HDR.jpg
    3.8 MB · Views: 39
  • IMG_20200621_000122915_HDR.jpg
    IMG_20200621_000122915_HDR.jpg
    3.8 MB · Views: 36
  • IMG_20200621_000058296.jpg
    IMG_20200621_000058296.jpg
    3.3 MB · Views: 34
Ok see here we are 3 days later and some further developments. Ayahuasca Purple has crown and showing some purple pigmentation. Black Sugar is going to crown shortly and is starting to show so pink/magenta pigmentation.

Green crack and blueberry aren't far behind with some good flowering site development.

I think I have also identified a small static air pocket that has developed within my room enviroment. This has resulted in me moving the final plant ordering to assist in drying out one of the lesser dry mediums. This will also be rectified with the addition of an extra fan at floor level.

I have also do some light defoliating as the mid canopy density was too much and restricted air flow and light penetration.

CalMag will be cut out in the next few feeds as all plants would of crowned and no longer require addition Calmag. Any extra needs should also be covered by the addition of molasses.

This week's feed is EC 1.9 due to ever so slight tip burn at 2.0 EC, pH 5.5.

10ltr water
8ml CalMag
8ml Bud Candy
8ml Nirvana
8ml Bud Factor X
8ml Big Bud
4ml Rhino Skin
5ml Sensizyme
12ml Connissure Part A
12ml Connissure Part B
8 x 1ml Level Scoops Plagron Bat Gauno Powder
8ml Molasses

Each plant fed 2.5ltrs

I have also attached some pictures of the developments.
 

Attachments

  • Screenshot_20200623-133211.png
    Screenshot_20200623-133211.png
    795.4 KB · Views: 15
  • Screenshot_20200623-133253.png
    Screenshot_20200623-133253.png
    488.8 KB · Views: 15
  • Screenshot_20200623-133238.png
    Screenshot_20200623-133238.png
    411.8 KB · Views: 13
Picture update at day 27 of flower. Also all have pretty much crowned now or will by the next time they are fed. From this point I will discontinue calmag and more than likely bigbud. Bigbud will be replaced with over drive and the base A and B will be increased to about 2ml/LTR
 

Attachments

  • IMG_20200627_085327384.jpg
    IMG_20200627_085327384.jpg
    3 MB · Views: 24
  • IMG_20200627_085336914.jpg
    IMG_20200627_085336914.jpg
    3 MB · Views: 24
  • IMG_20200627_085759462_HDR.jpg
    IMG_20200627_085759462_HDR.jpg
    3.7 MB · Views: 22
  • IMG_20200627_085804784_HDR.jpg
    IMG_20200627_085804784_HDR.jpg
    5.1 MB · Views: 21
  • IMG_20200627_085352510.jpg
    IMG_20200627_085352510.jpg
    3.9 MB · Views: 23
  • IMG_20200627_085745186_HDR.jpg
    IMG_20200627_085745186_HDR.jpg
    3.6 MB · Views: 36
  • IMG_20200627_075842982.jpg
    IMG_20200627_075842982.jpg
    5.3 MB · Views: 39
  • IMG_20200627_085220147.jpg
    IMG_20200627_085220147.jpg
    4.4 MB · Views: 34
  • IMG_20200627_085749632_HDR.jpg
    IMG_20200627_085749632_HDR.jpg
    5.1 MB · Views: 16
  • IMG_20200627_085755271_HDR.jpg
    IMG_20200627_085755271_HDR.jpg
    3.9 MB · Views: 12
Wowzers!

That nutrient MENU you have there is never ending.

Total waste you know and a very costly habit.

Twice as much is not twice as good I say but in this case it's countless multiples.

Good luck.
 
I brought them off eBay. A company called secret jardon make them there a 20w ocsillating fan. They have a pole mount clip on them. Think they are also known as monkey fans. Did have to put a plug on them.

About the nutes I find it works for me. I've tried many different things over many years. I find it reliable, don't get any problems....... Good enough for me.
 
Some manifolding pictures I took for another thread. Thought I'd add them as they are relative and a few sneeky bud development shots. I did burn the tips of a couple slightly due to plants stretching to close to the light. Caught it as they burnt. Only superficial damage.
 

Attachments

  • IMG_20200630_225620642.jpg
    IMG_20200630_225620642.jpg
    3.6 MB · Views: 21
  • IMG_20200630_225620642.jpg
    IMG_20200630_225620642.jpg
    3.6 MB · Views: 20
  • IMG_20200630_225625445_HDR.jpg
    IMG_20200630_225625445_HDR.jpg
    2.7 MB · Views: 23
  • IMG_20200630_225632313.jpg
    IMG_20200630_225632313.jpg
    3.3 MB · Views: 23
  • IMG_20200630_225203454.jpg
    IMG_20200630_225203454.jpg
    3.9 MB · Views: 22
  • IMG_20200630_225213949.jpg
    IMG_20200630_225213949.jpg
    3.4 MB · Views: 21
  • IMG_20200630_225219353.jpg
    IMG_20200630_225219353.jpg
    5 MB · Views: 19
  • IMG_20200630_225223597.jpg
    IMG_20200630_225223597.jpg
    4.9 MB · Views: 17
  • IMG_20200630_225644960.jpg
    IMG_20200630_225644960.jpg
    3.9 MB · Views: 14
  • IMG_20200630_225654234_HDR.jpg
    IMG_20200630_225654234_HDR.jpg
    3.1 MB · Views: 10
Picture up date at day 31. Some frosting starting to take place and good development on the buds.

Now full crowning has appeared my feeding scheme has changed slightly it now reads.


10ltr water
8ml Bud Candy
8ml Nirvana
8ml Bud Factor X
8ml Overdrive
8ml B52
4ml Rhino Skin
5ml Sensizyme
12ml Connissure Part A
12ml Connissure Part B
8 x 1ml Level Scoops Plagron Bat Gauno Powder
8ml Molasses
 

Attachments

  • IMG_20200701_223525817.jpg
    IMG_20200701_223525817.jpg
    5.3 MB · Views: 22
  • IMG_20200701_223521485.jpg
    IMG_20200701_223521485.jpg
    4.9 MB · Views: 25
  • IMG_20200701_223522276.jpg
    IMG_20200701_223522276.jpg
    3.4 MB · Views: 25
  • IMG_20200701_223517324.jpg
    IMG_20200701_223517324.jpg
    5.8 MB · Views: 28
  • Screenshot_20200701-224609.png
    Screenshot_20200701-224609.png
    406.5 KB · Views: 29
  • Screenshot_20200701-224732.png
    Screenshot_20200701-224732.png
    839.6 KB · Views: 28
  • Screenshot_20200701-224929.png
    Screenshot_20200701-224929.png
    795.7 KB · Views: 26
  • Screenshot_20200701-224654.png
    Screenshot_20200701-224654.png
    645 KB · Views: 25
  • IMG_20200701_223526649.jpg
    IMG_20200701_223526649.jpg
    5.3 MB · Views: 23
Unfortunately I bought mine right before they came out with the ones with the dimmer switches so that's a bummer. But I got them going under just one of the lights from seed for about 2 weeks. From there I kicked the other one on for veg and had them at about 26" away from the plants. Very tight node spacing! The down side, I didn't veg them tall enough being that this was my first run with led lighting. I was worried about my light depth penetration. Next run I'll veg to about 16" tall before making my switch and see how that does for me. But with topping and lst they really bushed out under the lights. Like I said, tight node spacing which I'm definitely happy with. Next run I'll also be opening up the tent fully at 3'x4' with 3x sf2000 in it which will give me 50 watts per square foot. A little excessive but I don't think it will be with running co2 in there as well. Though, I don't know how often people run co2 with led lights. So I may be taking a gamble there. Let me know any questions or input you may have!
 
Unfortunately I bought mine right before they came out with the ones with the dimmer switches so that's a bummer. But I got them going under just one of the lights from seed for about 2 weeks. From there I kicked the other one on for veg and had them at about 26" away from the plants. Very tight node spacing! The down side, I didn't veg them tall enough being that this was my first run with led lighting. I was worried about my light depth penetration. Next run I'll veg to about 16" tall before making my switch and see how that does for me. But with topping and lst they really bushed out under the lights. Like I said, tight node spacing which I'm definitely happy with. Next run I'll also be opening up the tent fully at 3'x4' with 3x sf2000 in it which will give me 50 watts per square foot. A little excessive but I don't think it will be with running co2 in there as well. Though, I don't know how often people run co2 with led lights. So I may be taking a gamble there. Let me know any questions or input you may have!

I run CO2 old skool style. I have 6 x 2 ltr bottles half filled with tepid water 2 cups of suagr and a packet of yeast. Changed or topped up ever 7-10 days.

Unless you're sealed you'll always be fighting your extraction. I run my extraction as low as I can accounting humidity and temperature. Hence why I have lots of old skool bottles. Second to this is why I run oscillating fans as CO2 is heavier than the surrounding air and good air movement inside is key to avoid CO2 hot spots at the bottom of the tent.

Seems to work well. I'd love to invest in automated CO2 generators just cash flow is always apparent.
 
Last edited:
For those of you interested set up is

Root riot cubes
Heated propagator
1 ltr (1/4 us gal) fabric pots
3 ltr (3/4 us gal) air pots
20 ltr (4.5 us gal) air pots
2m(6.6ft) (L) x 1m(3.3ft) (W) x 1.8m(6ft) tent
2 x 250 m3/h (820 ft3/h) 4 inch
2 x rhino pro carbon filters 4 inch
Acoustic ducting 4 inch
2 fan silencers 4 inch
2 x SF2000
1 x SF1000
Canna Coco professional 70%
Perlite 30%
6 inch inlet from outside (filtered)
Small humidifier
Small dehumidifier
Home made CO2 generators may switch to premade bags not sure yet
2 x 1m (3.3ft) x 1m (3.3ft) catch trays
Blue lab EC
Blue lab PH
Soil moisture meter (guide purposes only)
Intake and room temp gauge
Hydrometer
Mist sprayer
2 x 30w 8inch pole mount fans
Watering can with rose
Hydroton for pot base 15mm (1/2 inch) thick
General bits i.e; nitrile gloves, snips etc.
No pic of the watering can with rose, or did I miss it?
 
No pic of the watering can with rose, or did I miss it?
I did use the standard rose for the first few weeks but quickly became a problem I now. I now have an old HT lead cap from car. It's rubber slips over the end of the spout and has a 90 bend on it. Controls flow rate better too.
 
Back
Top