Stelthy's 600W Hps Project! (New-Cab)

stelthy

stelthy

Well-Known Member


From the looks of Romulan its a great strain, and if its been crossed with a Haze strain.. all the better :) - STELTHY :leaf:
 
stelthy

stelthy

Well-Known Member













I decided to wire the 2 Grow Shelf mounted CPU fans to this variable transformer, the transformer allows me to control the speed of the fans. I also connected up my spare air pump and air stones etc.. the RES is now full of bubbles, happy dayz - STELTHY :leaf:
 
stelthy

stelthy

Well-Known Member








I removed the old shitty seal around the top area.. fixed the door in place with masking tape and pre drilled holes before screwing it in place, I have no plans of opening this top door, so I sealed it with sealant and black tape and stapled it in place, now its alot more air tight - STELTHY :leaf:
 
stelthy

stelthy

Well-Known Member




The main cab door has major light leeks, I fixed this with insulation strips and some external black tape, and made sure the tape was securely in place, result = 99% no light leaks - STELTHY :leaf:
 
stelthy

stelthy

Well-Known Member



I grabbed a spare bit of Chopper Stopper from my local Hydro Store and cut it to the size of the Grow-Shelf, I then stapled it in place and tidied the edge with Silver Duct-Tape - STELTHY :leaf:
 
stelthy

stelthy

Well-Known Member


I utilized an old fan speed controller, I had once bought off E-Bay... and never used. This will be perfect for synchronizing the In-take and the Out-take fans as well as giving me control over the actual speed they spin at :) - STELTHY :leaf:
 
stelthy

stelthy

Well-Known Member

Originally I had a DIY 'cake bowl' and 'washing machine pipe' pulling cold air in from my boarded up chimney.. Time for a change I think :)







I bought various bits of 4" ducting, and tried to assemble the intake as best as possible, and also tried to keep everything as small and as STEALTH as possible - STELTHY :leaf:
 
stelthy

stelthy

Well-Known Member



Although the duct joins etc fit, and look set to work well, I was not happy with the distance it stuck out from the back of the cab... So....




I got busy with my Hack-saw and trimmed the join and the elbow, this allowed me to fix a ring in the intake hole 1st, then attach the elbow.. The ring made for a tighter fit once the elbow was lodged in place, then I just needed to apply some multi purpose sealant - STELTHY :leaf:
 
stelthy

stelthy

Well-Known Member


I bought a small 4" Odor Sok to stop any back-drafts and also filter the air for dust n bugs etc before the air comes in contact with the inside of the Grow Cab - STELTHY :leaf:
 
stelthy

stelthy

Well-Known Member





I fastened the Odor Sok in place with a Jubilee clip, and note: The Odor Soc and elbow sit alot closer to the cab now,(modified) - keeping it more stealth, I also added 2X 6" Flanges one to the in take and one to the out-take, just in-case my mate ever want to run a bigger lamp and needs to cool it better, it'll require minimal modding and he can then run 6" ducting :) - STELTHY :leaf:
 
stelthy

stelthy

Well-Known Member


The cabs pretty much all done now... I have a few things left on my shopping list to tick off as well as painting the unit but we're almost at the finish line :) - STELTHY :leaf:
 
stelthy

stelthy

Well-Known Member


All thats left on the shopping list is :-

:leaf: 2X mini CFL's + fixtures
:leaf: Green bulb + fixture
:leaf: Air filter + ducting (if required)
:leaf: 4L CANNA guide + laminate
:leaf: Small CANNA nuit range
:leaf: PH down (Phosphorus)
:leaf: Basic PH Test Kit
:leaf: Pippets
:leaf: Measuring cylinder
:leaf: Mini SCROG Screen
:leaf: Heavy duty scissors
:leaf: Egg Flipper

and thats it finished :) - STELTHY :leaf:
 
stelthy

stelthy

Well-Known Member
Sorry for the delay of my latest pic's etc... I have my laptop back now and I have loadsa memory so there will be no more delays I hope you've enjoyed my updates more coming soon :) - STELTHY :leaf:
 
stelthy

stelthy

Well-Known Member


Well thats 2 things I can tick off my list of things to buy :)



My list of Things to buy now reads as follows:-



:leaf: 2X mini CFL's + fixtures
:leaf: Green bulb + fixture
:leaf: Air filter + ducting (if required)
:leaf: 4L CANNA guide + laminate
:leaf: Small CANNA nuit range
:leaf: PH down (Phosphorus)
:leaf: Basic PH Test Kit
:leaf: Pippets
:leaf: Measuring cylinder
:leaf: Mini SCROG Screen


What to do next? ...............Skin up, kick back n chill with a GWS joint and a Jack Daniels and coke, phew! - STELTHY :leaf:
 
You must log in or register to reply here.
Top