Moflow
Well-Known Member
You are right....Looks like knock off weed to me
It certainly knocks me off my feet....
You are right....Looks like knock off weed to me
Yes they'll gladly work out a deal with you. Just send an inquiry on Alibaba. You might wanna look at getting smaller 288boards though as you could possibly get a decent price break for needing more. plus, you'll have a hard time warrantying anything from China so having more pieces of a less expensive board, might be smart, IF one crapped out and you needed to buy, say an atreum lighting board to replace one.Hey guys been doing a little reading and looking into getting some knock offs for my new space
I have a open hard room for flowering with a couple smaller tents for mothers and clone/veg
The main flower section is 4x12 nft trays. i have walk ways either side but i can put up some panda film to gain some reflection.
The room is sealed with co2 and new split sytem aircon
For the lights i was thinking fotop 800x4 with a hlg 600 power suply. 150watts per board with no heat sinks. X three
You think they would be able to do me up some kits with the 4 boards+ power supply and the other materials i need to put these together?
We run FoTop boards at 150w each with no heatsink with about 5 inch spacing between boards. 750w total on 5 boards over a 4x7Is there any other driver setup i should consider to drive the boards harder?
I have a 1 ton split system to cool the room
these are the deals i have been offered from rita
1. 4pcs FoTops V2 800 board (700pcs lm301B and 100pcs 660nm, size: 900X280X2mm)
NO HEAT SINKS
3. 1pc meanwell driver HLG-600H-48AB
4. 1pc dimmer switch
5. hang wires, connect wires, connectors, plug wire.
Total cost 667.76+shipping cost 135+processing fee 22.48=USD825.24
or
1. 4pc top LM561C S6 800pcs board(900x280x2mm)
NO HEAT SINKS
3. 1pc meanwell driver HLG-600H-48AB
4. 1pc dimmer switch
5. hang wires, connect wires, connectors, plug wire.
price USD460.97+shipping cost 135+processing fee 16.68=USD612.65
4pcs FoTops V2 800 board (700pcs lm301B and 100pcs 660nm, size: 900X280X2mm
Total cost USD128.18X4+shipping cost 98+processing fee 17.1=USD627.82
shipped to australia
Depends. They didnt test any major difference for us. How much cannopy do you want to cover, how deep are your pocekts etc.Are the 301b worth the extra money vs the 561c boards?
Sounds golden. Id get my drivers from somewhere no china though, for no bullshit international warranty shipping. Digikey shouldnt be much more expensive. And they do free shipping.Hey guys been doing a little reading and looking into getting some knock offs for my new space
I have a open hard room for flowering with a couple smaller tents for mothers and clone/veg
The main flower section is 4x12 nft trays. i have walk ways either side but i can put up some panda film to gain some reflection.
The room is sealed with co2 and new split sytem aircon
For the lights i was thinking fotop 800x4 with a hlg 600 power suply. 150watts per board with no heat sinks. X three
You think they would be able to do me up some kits with the 4 boards+ power supply and the other materials i need to put these together?
Seems good for a 400 wattAnyone check these out?
Check out this product on Alibaba App Led lamps wholesale china samsung fluence led grow light bar lm561c quantum led lighting board 400w 600w 800w
https://f2rq3.app.goo.gl/?link=https://app.alibaba.com/dynamiclink?touchId=60790013179&type=product&schema=enalibaba%3A%2F%2Fdetail%3Fid%3D60790013179%26ck%3Dshare_detail&ck=share_detail&shareScene=buyer&apn=com.alibaba.intl.android.apps.poseidon&ibi=com.alibaba.sourcing&isi=503451073&amv=69
Got a link for the red/far red strips?Not much action on this thread lately. Personally ive been unable to logon for a few weeks.
Anyways; got another shippmemt from our lovely Rita, she managed to push it thru before their new year.
5 x fotop lm561c 3000k
1 x fotop V2, lm301b with extra red diodes (trying this one out)
16 x 312 qbs, at 36V. 3000k, 10 x80 cri and 6 x 90cri.
This time we will fit the fotops 3 per tray and mounting them linearly down the aisle as we havent have good coverage on the sides using fotops across the aisle.
The smaller boards will go up on 4 foot alu sheets and go across the aisle. 4 in a row across. The idea is to power the boards down the aisle so all of the boards in the sides are on the same driver to dial in perfect even coverage.
Also, were going to try the whole enhanced spectrum thing. Picking up some strips from cutter, they got so e very cool stuff. Getting some deepred/far red strips, some 2000k strips with extra uv, a whole load of infra red as the led grow wont hold a good temp with the weather outside. Oh, and some blurple phosphor boards and some of their new high power 5050 strips.
Not too sure how much it will change. The first batch of leds we threw up we used 3 different spectrums (2700k, 3000k, highcri Vesta strips) and we couldnt really see any difference beteeen spectrums. What did differ? The trays we almost covered by soft driven boards were clearly better and faster finishers. So we will do one more stab at spectrum and if it doesnt give any major change we will stick to 3000k 80cri.
Hope yer all well.