Airwalker16
Well-Known Member
All these new posts on this thread and my alerts doesnt tell me anymore. That's annoying...
QB96 Elite V2 w/ SSTX heatsink question
- Thread starter pulpoinspace
- Start date
-
- Tags
- qb96 qb96 elite v2
Rahz
Well-Known Member
That's been my experience with 90CRI vs 80 or 70 CRI.
coreywebster
Well-Known Member
Miss one notification and they stop notifying, should be fine now you have caught up.
Or_Gro
Well-Known Member
Really looking forward to flowering (eight 288s + four 96s + far red bar) vs (six 96s + far red bar).
Just finishing up grow with the 288 array above - 776w at the wall:
Big “diesel” (back left) and haze (back right) lowers not yet harvested:
Front “diesel” - 270.5g/9.7oz
Front haze - 304.0g/10.9oz
Back “diesel” tops - 386.5g/13.8oz
Back haze tops - 413.0g/14.75
Total so far: 1374g/49.1oz/3.1lbs
Still to go:
Just finishing up grow with the 288 array above - 776w at the wall:
Big “diesel” (back left) and haze (back right) lowers not yet harvested:
Front “diesel” - 270.5g/9.7oz
Front haze - 304.0g/10.9oz
Back “diesel” tops - 386.5g/13.8oz
Back haze tops - 413.0g/14.75
Total so far: 1374g/49.1oz/3.1lbs
Still to go:
Last edited:
Or_Gro
Well-Known Member
I don’t keep log book, just track on these threads. Specific info is somewhere on the grow thread, but something close to this:
Seed to 6 nodes/1st topping - 30 days
3 toppings for 8 mains - 21-30 days
Vertical to 12:12 ht -14-28 days
Dug up some info on this grow:
1st topping for 2 mains - July 1
3rd topping for 8 mains - July 18
12-12 (delayed 10-14 days by previous grow) - August 25.
So, 56 days 1st topping to 12:12.
Today is day 92 of flowering, approx 178 days seed to today for long flowering sativas...i’m looking forward to this grow being over...288 vs 96 smackdown will be with shorter flowering strains....hopefully!
Last edited:
WeedSexWeightsShakes
Well-Known Member
Thinking should be around 4lbs once done?
Or_Gro
Well-Known Member
WeedSexWeightsShakes
Well-Known Member
No harvest video. Did post a video of the next grow coming up. Been drying in the garage. Need to start trimming it up, getting buds off and curing. I don’t plan on doing a real trim but more of a quick trim to get the crap off that I won’t even really use. I’ve been trying to read if curing untrimmed bud is ok.
Or_Gro
Well-Known Member
I think you want to get any green without trichs off...imo, the more green off the better the cure, but at some point, you start taking off too much sugar...especially if you’re not concentrating the trim...
hybridway2
Amare Shill
Dry weight???
Nice grow.
Or_Gro
Well-Known Member
Yes.
Thanks, surprised the shit out of me. Big pipes & intense lights...
Just gotta share these mcnuggets, magnify for shock & awe:
Super silver haze
NYC Diesel
Lol
hybridway2
Amare Shill
All I can say is AMAZING JOB MAN!!!
Or_Gro
Well-Known Member
ThanksAll I can say is AMAZING JOB MAN!!!
CoB_nUt
Well-Known Member
Quick dumb question. The 22" spacing for the 2 Qb 96's, is that center to center or edge of heatsink to edge of heatsink. Probably will be going back to hodepo in a minute. Smh I already cut the damn alu angle,most likely too short.
Cut it at 26.5" and didn't think about it until AFTER it was cut.
Cut it at 26.5" and didn't think about it until AFTER it was cut.
Or_Gro
Well-Known Member
Last edited:
Or_Gro
Well-Known Member
Edge to edge...play with 18-22”..,
CoB_nUt
Well-Known Member
Thanks. ......Dammit!!!
.Edit* Is that inside edge or outside? I'm no goid at judging distance from pics.
Last edited:
CoB_nUt
Well-Known Member
Looks like they are killing it.
pulpoinspace
Well-Known Member
Last edited: