Airwalker16
Well-Known Member
All these new posts on this thread and my alerts doesnt tell me anymore. That's annoying...
That's been my experience with 90CRI vs 80 or 70 CRI.they think the 96s cause the plants to mature faster, speeding up flowering by a week or so.
Miss one notification and they stop notifying, should be fine now you have caught up.All these new posts on this thread and my alerts doesnt tell me anymore. That's annoying...
I don’t keep log book, just track on these threads. Specific info is somewhere on the grow thread, but something close to this:How long you veg those for?
Thinking should be around 4lbs once done?Really looking forward to flowering (eight 288s + four 96s + far red bar) vs (six 96s + far red bar).
Just finishing up grow with the 288 array above - 776w at the wall:
Big “diesel” (back left) and haze (back right) lowers not yet harvested:
View attachment 4237968
Front “diesel” - 270.5g/9.7oz
Front haze - 304.0g/10.9oz
Back “diesel” tops - 386.5g/13.8oz
Back haze tops - 413.0g/14.75
Total so far: 1374g/49.1oz/3.1lbs
Still to go:
View attachment 4237969
3.5-4.0...pfamazin!Thinking should be around 4lbs once done?
No harvest video. Did post a video of the next grow coming up. Been drying in the garage. Need to start trimming it up, getting buds off and curing. I don’t plan on doing a real trim but more of a quick trim to get the crap off that I won’t even really use. I’ve been trying to read if curing untrimmed bud is ok.3.5-4.0...pfamazin!
How’d yours go, got a vid comin out?
I think you want to get any green without trichs off...imo, the more green off the better the cure, but at some point, you start taking off too much sugar...especially if you’re not concentrating the trim...No harvest video. Did post a video of the next grow coming up. Been drying in the garage. Need to start trimming it up, getting buds off and curing. I don’t plan on doing a real trim but more of a quick trim to get the crap off that I won’t even really use. I’ve been trying to read if curing untrimmed bud is ok.
Dry weight???Really looking forward to flowering (eight 288s + four 96s + far red bar) vs (six 96s + far red bar).
Just finishing up grow with the 288 array above - 776w at the wall:
Big “diesel” (back left) and haze (back right) lowers not yet harvested:
View attachment 4237968
Front “diesel” - 270.5g/9.7oz
Front haze - 304.0g/10.9oz
Back “diesel” tops - 386.5g/13.8oz
Back haze tops - 413.0g/14.75
Total so far: 1374g/49.1oz/3.1lbs
Still to go:
View attachment 4237969
All I can say is AMAZING JOB MAN!!!Yes.
Thanks, surprised the shit out of me. Big pipes & intense lights...
Just gotta share these mcnuggets, magnify for shock & awe:
View attachment 4238535
Super silver haze
View attachment 4238536
NYC Diesel
Lol
ThanksAll I can say is AMAZING JOB MAN!!!
Here’s the pic that goes with the second grow bud pics @ 6 wks:I’ve posted several sets of pics for two currently flowering grows. Both guys are experienced growers, they think the 96s cause the plants to mature faster, speeding up flowering by a week or so.
Day 54 of 8-10 wk strain, Flush begins tonight.
View attachment 4237817 View attachment 4237818
Colas from other grow @ 6 wks:
View attachment 4237824 View attachment 4237825
Anyone else flowering under them, have a view?
Edge to edge...play with 18-22”..,Quick dumb question. The 22" spacing for the 2 Qb 96's, is that center to center or edge of heatsink to edge of heatsink. Probably will be going back to hodepo in a minute. Smh I already cut the damn alu angle,most likely too short.
Cut it at 26.5" and didn't think about it until AFTER it was cut.
Thanks. ......Dammit!!!.Edge to edge...
Looks like they are killing it.Here’s the pic that goes with the second grow bud pics @ 6 wks:
View attachment 4238629