oldsilvertip55
Well-Known Member
A little pricer but i would spend a little more to get what is right in the long run. i forget manners good evening sedan!
Good morning.))A little pricer but i would spend a little more to get what is right in the long run. i forget manners good evening sedan!
this one looks interesting but it seems like the very top colas won't get direct light from the lamps...? what lights are those?here's another project
note - the lamp reflector is bent up to increase the angle of incidence of the light and capture the top.
View attachment 4502364
Please ask - I'm from Germany and am currently in the wake of designing 2 entirely similar small growth chambers in order to do controlled comparative grows... I need a 2 boards with each, at least 3, perhaps even 4, separate channels/drivers:There is no secret in this, it is the same as the diodes of other brands are made. The catch is different: if you are not a resident of Germany, then you cannot buy these strips at retail, if you can, it is very expensive. OSRAM does not retail in other countries.
I have a student from Bonn .. here is his work
View attachment 4503943
If you are from Germany, then I can ask him where he bought. But anyway, it's still expensive diodes. He spared money and bought OSRAM only for flowering - red. On veg- white, he has a Creе.
As for the drivers, it depends on the capabilities of the client. As a rule, we try to reduce the cost of the product as much as possible, because 90% of my sales are in Moscow and St. Petersburg, people in other cities of Russia cannot afford this light.
This is a very good light indeed but I feel it still lacks some stuff to be perfect...I would still like to make a remark to Sylvania Grolux.
wouldn't it then be a good idea to design a board where the individual heatsinks could be arranged dynamically? likeThe property of LED lights is a large light loss with distance. 30-40 cm from the surface of the meadow is the maximum effect .. For greater efficiency, I would push the strip wider,
L: 600-1200 x W: 600-1200 x H: (irrelevant)Abmessung Grundgehäuse (LxBxH): 760 x 415 x 169 mm
What they could so also is to integrate more 550nm light because the bandwith from 520nm-600nm can penetrate deeper into (or through) the leaves - also increasing canopy penetration, and also, this radiation does cause less heatspots, which is important when diodes are close.And oblique rays are not so effective. It turns out that the meadow is illuminated unevenly.
There 2X600 watts of sodium Philips Green Power.this one looks interesting but it seems like the very top colas won't get direct light from the lamps...? what lights are those?
First, I want to say that I’m the same electronics as the violinist from Schwarzenegger.))Please ask - I'm from Germany and am currently in the wake of designing 2 entirely similar small growth chambers in order to do controlled comparative grows... I need a 2 boards with each, at least 3, perhaps even 4, separate channels/drivers:
1. Main photosynthesis light with a balanced spectrum (white) and a high PAR efficiency
2. UVB-UVA-NearUV-(various cyans/blues)
3. 660nm Deep Reds
4. 730nm Far Reds (+maybe IR to increase night time temperature)
perhaps 3+4 combined (still undecided on this...)
I know for sure that the Sylvania Grolux sodium Suite is one of the best in its class. When these lamps were made in Belgium, they were the most expensive of the sodium. Now, when in Europe the demand for these lamps disappeared, Sylvania Growlux is already being made in China - they are cheap.The Sylvania lamp has its diodes shielded by glass - which is known to absorb UV-radiation rather well...
Thanks!nice......
https://www.led-tech.de/de/50cm-Osram-SSL-Horticulture-Hyper-Red-Plug-und-Grow-StreifenPlease ask - I'm from Germany
This is a very interesting approach. It's sort of a combination of the horizontal & vertical approach, but I don't think it'll reach the same efficiency in the usage of the lamps output like your silo-grow - the light gets partially reflected and a bit weaker, but the lux will increase in these areas as well. But he'll cut vegtime enormously down - how does he fertigate?There 2X600 watts of sodium Philips Green Power.
We know that such lamps illuminate in a circle evenly.
To get the light to the top, he bent the reflector up. They grow up, will bend even more.
Now it looks like this
View attachment 4505797
Friend, I didn't understand that, but I like Schwarzenegger alot! Schwarzenegger for presidentFirst, I want to say that I’m the same electronics as the violinist from Schwarzenegger.))
Yes, me too, 600w Sylvania Grolux HPS was my main growlight indoors for years. Got it from China.I know for sure that the Sylvania Grolux sodium Suite is one of the best in its class. When these lamps were made in Belgium, they were the most expensive of the sodium. Now, when in Europe the demand for these lamps disappeared, Sylvania Growlux is already being made in China - they are cheap.
thanks for the link
Yes, just like in the case of a 37-watt microgrove, this is a combination of vertical and horizontal cultivation medodes. All this to increase productivity technologically, without adding power.This is a very interesting approach. It's sort of a combination of the horizontal & vertical approach, but I don't think it'll reach the same efficiency in the usage of the lamps output like your silo-grow - the light gets partially reflected and a bit weaker, but the lux will increase in these areas as well.
I don’t understand this word))But he'll cut vegtime enormously down - how does he fertigate?
this means that if Schwarzenegger would be a violinist now, then I could be an electronic engineer then. This is a joke, as Russians say, when they want to express what is impossible. Not necessarily Schwarzenegger, anyone. It’s impossible to imagine Schwarzenegger as a violinist, there are few brains and creativity.Friend, I didn't understand that, but I like Schwarzenegger alot! Schwarzenegger for president
I'm sorry I mixed it up with "irrigate" - I mean how does he give water to the pots - the ones at the center seem a bit hard to reach...I don’t understand this word))
Porn? oh my God, you see how it is in Hollywood, once you have a beautiful body... and I don't want to know how bad their weman are treated with all those sex-exploitive scandals and shit... too much decadency in some regions of their society there... just look at Charlie Sheen, that guy infected hundreds - maybe thousands with HIV just because he couldn't controll himself and onlöy thinks of himselves, not his brothers and sisters.... a shamethis means that if Schwarzenegger would be a violinist now, then I could be an electronic engineer then. This is a joke, as Russians say, when they want to express what is impossible. Not necessarily Schwarzenegger, anyone. It’s impossible to imagine Schwarzenegger as a violinist, there are few brains and creativity.
Yes, Schwarzenegger in my childhood was my one of the most beloved actors in Hollywood. True lie .. Terminator. And I was very disappointed in him when I found out that he starred in porn and achieved his success thanks to his wife. It is very disgusting for me when a man humbles himself in front of a woman because of money. He could not even afford a normal lover, as a star should.))) He was afraid of his wife, like fire.)))
If not for Kennedy, there would be no Terminator. As an actor, he is pathetic and causes only a smile when he begins to play according to Stanislavsky.
And he did not succeed in becoming president, no matter how hard his wife tried, ... it turns out that to be president, it is not enough to be a terminator, you also need a small part of the brain at least.)))
If you have electronic skills, then you will not have any problems. I know many guys who started small with simple growers on the forum, and eventually turned into high-class specialists in LED lighting. There are also such ones here. ANC is one of them.I have much to learn and to do trying for a self build of led .thanks for insight,sedan!
This is his past job.I mean how does he give water to the pots - the ones at the center seem a bit hard to reach...
This is my Soviet upbringing, Bro.))) There is a very strict morality based on spiritual values. It’s a shame for me to trade my body or live off of a woman, which is essentially the same. You can’t re-educate me.Porn?
His father tried for Charlie Sheen .. I don’t remember his name .. the film "Platoon" was such once. Charlie Sheen did not need to achieve anything - he was presented with all this from childhood. He is a spoiled child, thinking that everything is allowed to him. I do not perceive him as an actor. Even comedic roles he was not very successful.just look at Charlie Sheen
Yes, I know that when Schwarzenegger started having heart problems and could not act in films, Kennedy appointed him as governor, hoping to push him into the presidency, like Reagan, even against the law, because a foreigner cannot be president. For some reason, she ... and her family did not succeed in returning the Kennedy clan (represented by Schwarzenegger) to the US throne.but seriously, Schwarzenegger was quite intelligent as Governor
Hello, comrade!Hey buddy I am a bit ahead of you, I harvested and dried over the past couple of weeks. Check out my journal.
View attachment 4512910
Yes my friend, mine was not all successful, did not get my weight and the buds were not as tight as my usual grows.Hello, comrade!
excellent result! Congratulations!
PS to me for a long time, about 3 months. This year was not very successful for me in terms of growing.
Yes, from five cycles the lamps may not shine so brightly. In addition, you have long cycles in the vertical method. I used sodium lamps for no more than 2 years.Yes my friend, mine was not all successful, did not get my weight and the buds were not as tight as my usual grows.
I have run these lamps for about 5 grows so going to change them with my next grow.