FranJan
Well-Known Member
I called it the Ethopian strain. Not much on yield and not much on quality but sure ate up a lot of light.
ROFLMAO You get like what, $120.00 an eighth for that shizzle, right?
I called it the Ethopian strain. Not much on yield and not much on quality but sure ate up a lot of light.
As long as we're sharing HOT5 pics let me see if I've got any pics layin around from my last run on HOT5...Here we go
View attachment 2425284
I called it the Ethopian strain. Not much on yield and not much on quality but sure ate up a lot of light.
It's sad, really sad.Dude... lol wtf is that?
Girls look fantastic brother p-diddy, developing very nicely. 5 weeks you think on the anubis? I'm not familiar with this strain/breeder, is it indica? sorry if it was mentioned already. keep up the good work! Awesome thread by the way, even getting picked up in other countries, impressive!
View attachment 2424980
Talkin about " happy leaves " .....
Blue color means high PS rates...
yellow to red means low PS rates....
Two trees illuminated at night from one hps street lamp....
These plants have almost 24/24 light,over/above them....
Which of their leaves are ..."happier ",at this case ?
The erect ones or the flat ones ?
The erect produce more or the flat ?
..
To erect or not to erect ?
That's the question ...
(chlorophyllosophy ..... )
As long as we're sharing HOT5 pics let me see if I've got any pics layin around from my last run on HOT5...Here we go
View attachment 2425284
I called it the Ethopian strain. Not much on yield and not much on quality but sure ate up a lot of light.
Well my brother are you proving the Hans panel is as good if not better than the competitions? Vast improvement over the last grow...lol. Like me I believe you have said "F@#*!" Auto's give me some real plants. Your ladies are lookin pretty stellar, like the room improvements too. Subb'd and catchin up.
ROFLMAO You get like what, $120.00 an eighth for that shizzle, right?
I set up my 200w 3000k induction light yesterday got pimp light levels with my 2 300w led units
Oh and if I run cfl`s for uv I run them the whole day even a 12% uvb light can not put out more uv then sunlight even at 1" from the source, but that 200w induction has was more penetration then cfl`s do, but it still can`t come anywhere near to the new led lights I have @1m the induction is hitting 500 to 700 on the light meter where as the leds are closer to 1800 both together and I get an even 2000+ over my whole flowering area.
That being said they do say to keep a cfl reading light more then 6" from your head as some people got bold spots from them and they can also cause headaches too from what I heard I like to put them 1" if the plant needs the light but I move my plants daily when using cfl`s or move the light to another spot every day or 2 to not cause uva damage.
And the light balance is nice like a daylight with a lot of purple (blue/red from the leds)
Yea Buddies Now Thats 1 Sweet looking Grow Brother.Now Get Your Azz Over To The Party Cup Thread And Enter Brother.
Yea Buddies Now Thats 1 Sweet looking Grow Brother.Now Get Your Azz Over To The Party Cup Thread And Enter Brother.
You got the goods, now like the Dawg said. Get your Ass to the Party and sign up for the competition, I did.
Put up some pics............would really like to see this setup......
I`ll try to clear the area of storage boxes and pots and snap some pics off for you
Looks a bit of a mess at the moment as the shade for the induction was taken out of a light fitting but it was free! lol
thanks brother puff..........It's a Indica dom hybrid for sure/ how much? idk...VG, the anubis grower, says they(squatty he doesn't know) may finish 5 weeks from now(looking at the pics), I think longer honestly........when you starting back up puff/ new lights??????![]()
No space my brothers...........Fat ass cheesy bitch blocks the whole damn panel!............I'm in the next one/ no doubt.....good luck growers.
Woke up this morning and found out that Andy Reid still has his job......I'm not even gonna turn on philly sports radio this whole week....blah
16th day of 13/11 and that's it...........be safe and happy growing RIU
Howdy!
Subbed! Friggin'A Awesome grow goin' here. I'm a relative noob to indoor growing (3 grows: 2cfl, last one t5HO, all micro). Consider myself gifted with beginner's luck to this point. Just starting to catch wind of this PAR business and really like what I'm sniffing.
Was all ready to start buying exotic t5 lamps to swap out my current setup that consists of a 3:1 mix of hydrofarm blues/reds depending on VEG or BLM. THEN I caught wind of induction lighting, specifically the mixed phosphors in the inda-gro unit. I think I'm hooked. The efficiency of induction seems pretty tough to beat.
Not sold on LED; seems like pheasant hunting with a platoon of .22s instead of one .410.
So here's my current problem (there's always something, isn't there?): The tent I'm in is a Secret Jardin DP90 (24Lx36Wx24H). I told you it was micro!![]()
With a total of 24" of headspace do you think I can stuff in a Pro 100-PAR, a 2 gal. smart pot and a 24x24 SCROG without setting something ablaze?How much heat does the unit generate? I chatted with the Big Cheese over at Inda-Gro at length yesterday (5* cust. svc. AWESOME to talk to the president of the company, U.S. made, REALLY dig it!) He was absolutely convinced I would be tickled with the results I could get with the unit in a 4 sqft. footprint, but stopped short of endorsing it within my overhead confines. He suggested I come over here and check out your grow!
I've been hanging my hat in another forum for my stealthy comradeship in this DL hobby we all share (I'll call it "CrassGitty", I know most of these places don't like publishing the names of the competition) but I think I'll spend a little more time over here these days!
So with using it yourself, what do you think? Too much heat for such a small space? Should I stick to the relatively narrow t5s until I can deploy a taller tent? I WISH I could find a retailer here in Boston where I could see one in action and not have to go by videos and people's comments...
Thanks in advance to anybody offering any feedback whatsoever to my half-baked ramblings! In PSU's words, 'Stay safe and Happy growing!'
Healthy as all hell my friend. Wonderful!
That Anubis bitch is ackin' a foo... I'm sure you'll make her ack right.
Thanks for the info, was just an odd strain name so wanted to find out about it. Guess the original grower doesn't even know...whenever they finish they finish regardless of what he says. Hope to be back in the groove of things around February. Don't think I'll get anything new right off the bat, just waiting on the new light from fero as the prize from the last competition (thanks again endur0xX!). Also kind of just waiting to see how some of next year's lights are looking.
Yeah, was hoping you'd be in the competition this round. Next one hopefully. I forget you're a philly fan, geez what happened to the eagles this year? I mean seriously, I haven't heard any explanation. It's been a crazy season for sure. My niners lost yesterday to the god damn rams, tied them a few weeks ago, and lost yesterday, both because of your team's old shitty kicker missing game winning field goals!!!
Are you going to stay 13/11 the whole time?
Howdy!
Subbed! Friggin'A Awesome grow goin' here. I'm a relative noob to indoor growing (3 grows: 2cfl, last one t5HO, all micro). Consider myself gifted with beginner's luck to this point. Just starting to catch wind of this PAR business and really like what I'm sniffing.
Was all ready to start buying exotic t5 lamps to swap out my current setup that consists of a 3:1 mix of hydrofarm blues/reds depending on VEG or BLM. THEN I caught wind of induction lighting, specifically the mixed phosphors in the inda-gro unit. I think I'm hooked. The efficiency of induction seems pretty tough to beat.
Not sold on LED; seems like pheasant hunting with a platoon of .22s instead of one .410.
So here's my current problem (there's always something, isn't there?): The tent I'm in is a Secret Jardin DP90 (24Lx36Wx24H). I told you it was micro!![]()
With a total of 24" of headspace do you think I can stuff in a Pro 100-PAR, a 2 gal. smart pot and a 24x24 SCROG without setting something ablaze?How much heat does the unit generate? I chatted with the Big Cheese over at Inda-Gro at length yesterday (5* cust. svc. AWESOME to talk to the president of the company, U.S. made, REALLY dig it!) He was absolutely convinced I would be tickled with the results I could get with the unit in a 4 sqft. footprint, but stopped short of endorsing it within my overhead confines. He suggested I come over here and check out your grow!
I've been hanging my hat in another forum for my stealthy comradeship in this DL hobby we all share (I'll call it "CrassGitty", I know most of these places don't like publishing the names of the competition) but I think I'll spend a little more time over here these days!
So with using it yourself, what do you think? Too much heat for such a small space? Should I stick to the relatively narrow t5s until I can deploy a taller tent? I WISH I could find a retailer here in Boston where I could see one in action and not have to go by videos and people's comments...
Thanks in advance to anybody offering any feedback whatsoever to my half-baked ramblings! In PSU's words, 'Stay safe and Happy growing!'
I'm sure with adequate airflow that light should be no problem in there. Just keep your plants in line and you should be fine.
The only thing I'd do differently: Instead of a SCROG in that small area, just tying your plant down. Perhaps Main-Lining? Just with previous experience, it's annoying to weave my big clumsy hands in a small scrogged area to tie something down (especially if it's towards the back of the tent and I don't have 360 degree access).
Good luck, I'd love to see a PAR100 grow... Please keep us up to date!
The grower knows this strain....but TBH unless pyramid seeds comes in here and tells me same, I'm thinking they'll go longer. Ah yes your prize fero light, will probably replace your ds200??....Yeah I'm excited to see EH's new panels(not one teaser pic by EH!!!) and other new quality gear. Feb can't come soon enough to see you back at it Bro...........
Yeah, I'm kind of taking my time in designing the new lights, almost ready though......
The reason I take my time, I like to brainstorm a lot, and like to sit on an idea for a few weeks or more just to see how and where they could possibly evolve.
Because this next series of lights (2 models) will be replacing everything in my catalog, they need to be right the first time, and also needs to be future upgrade-able. Once the mould is made, there are no cheap do-overs.
Expect them to be available in January/February 2013.