i wanna DIY a rosin press

secretmicrogrow420

secretmicrogrow420

Well-Known Member
Hey guys after watching a thread made by a member on here i want too DIY my own rosin press
im thinking about buying a H frame 12 ton shop press and a dabpress 3x7 diy caged press plates kit but i have no idea what im doing lol im basically just putting random parts together hoping they work
the H frame 12 ton shop press im looking at costs 150 usd super cheap! and the dab press caged press plates i can buy for 270 kinda expensive but for what they do they are cheap in my book!
heres the links too items:
vevor hydraulic shop press link 12 ton H frame
diy rosin heat plates link
in total this will cost me like 400 dollars which is what a nug smasher mini would cost and that is only 2 ton?
is there anything else im missing? should i buy a different Press? please let me know :D
super stoked <3 :3
this is what the H frame 12 ton shop press looks like

hydraulic-shop-press-m100-1.2.jpg
 
Hugo Phurst

Hugo Phurst

Well-Known Member
Your money, your build.
If it's "because you want to" - go for it.

So here's my 2 cents....That's a big rig, tall & top heavy. Got dedicated space & a base?
12 Ton is more than you'll need unless you're pressing professionally (a 4 ton is plenty IMO).
Check out Dabpress, I have one of their smaller presses, work fine & hides in the corner when not used.

Have fun
 
secretmicrogrow420

secretmicrogrow420

Well-Known Member
Hugo Phurst said:
Your money, your build.
If it's "because you want to" - go for it.

So here's my 2 cents....That's a big rig, tall & top heavy. Got dedicated space & a base?
12 Ton is more than you'll need unless you're pressing professionally (a 4 ton is plenty IMO).
Check out Dabpress, I have one of their smaller presses, work fine & hides in the corner when not used.

Have fun
Click to expand...
thank you so much for taking the time too respond. space is not a issue i live in a big house so i can store it in my garage or in my spare bedroom or in my computer room. also you say "a base?" what do you mean a base? can you please give me a link to a good "base" i could use? sorry i dont know what other parts i need.
 
secretmicrogrow420

secretmicrogrow420

Well-Known Member
here is a picture that i copied that one of our members uploaded of his 20 ton harbor freight press.
im gonna send him a message and if the press im looking at is the same press in the picture(the stickers different) if it is the same press im gonna pull the trigger and buy it!
members 20 ton shop press.png
 
secretmicrogrow420

secretmicrogrow420

Well-Known Member
PopAndSonGrows said:
Just get the whole DabPress rig

4 or 6-ton, unless you're pressing a lot of material then maybe get the 12-ton.
Click to expand...
thank you for your input i might go with the 4 ton because it costs 350 usd and the one im thinking about building is 520 but it looks so awesome in the picture like imagine having that press and pressing rosin with it?

DarkWeb said:
@manfredo that's his press. Plates and press are separate and from two different companies.

I went with dabpress caged plates, welded up a press and added a 8-ton hydraulic jack. Works great and stores easily.
Click to expand...
thank you for confirming that its his press. i sent him a message im waiting for a reply.
i will probably also go with dabpress caged plates but his setup looks so nice i might copy it
lol you welded up your own press? thats awesome!
this is gonna cost me like 580 for a 20 ton press! im stoked because manfredo's looks super nice in the picture he posted!
 
DarkWeb

DarkWeb

Well-Known Member
secretmicrogrow420 said:
thank you for your input i might go with the 4 ton because it costs 350 usd and the one im thinking about building is 520 but it looks so awesome in the picture like imagine having that press and pressing rosin with it?


thank you for confirming that its his press. i sent him a message im waiting for a reply.
i will probably also go with dabpress caged plates but his setup looks so nice i might copy it
lol you welded up your own press? thats awesome!
this is gonna cost me like 580 for a 20 ton press! im stoked because manfredo's looks super nice in the picture he posted!
Click to expand...
He's not been around in a little bit but the change of seasons might be keeping him from posting. Yeah, I bought the plates and the ram everything else was basically just extra metal I had in my shop. It's 20" tall 15" wide and 12" deep. The caged plates and jack fit inside. Table is a mess right now.
Screenshot_20231022_130252_Gallery.jpg
 
secretmicrogrow420

secretmicrogrow420

Well-Known Member
DarkWeb said:
He's not been around in a little bit but the change of seasons might be keeping him from posting. Yeah, I bought the plates and the ram everything else was basically just extra metal I had in my shop. It's 20" tall 15" wide and 12" deep. The caged plates and jack fit inside. Table is a mess right now.
View attachment 5337966
Click to expand...
i love it! so you put your jack inside and put the plates ontop of the jack?
and can i ask you a question? is 20 tons over kill? i just found out that harbor freight sells the same press but in 12 ton version for 100 dollars cheaper!!! so i can buy the 20 ton press for 249.99 or the 12 ton for 169.99?
 
DarkWeb

DarkWeb

Well-Known Member
secretmicrogrow420 said:
i love it! so you put your jack inside and put the plates ontop of the jack?
and can i ask you a question? is 20 tons over kill? i just found out that harbor freight sells the same press but in 12 ton version for 100 dollars cheaper!!! so i can buy the 20 ton press for 249.99 or the 12 ton for 169.99?
Click to expand...
Screenshot_20220504-160109_Gallery.jpg
I put the caged plates on the bottom. The weight of the jack puts a little preload on the springs and stays in place nicely. I've also used the 12 ton for other metalwork. It's nice it will do the job no problem. Not as big but still big and takes up a lot of room.

You definitely don't need as much pressure as you think. https://thepressclub.co/pages/rosin-press-pressure-calculator
Your surface area is the bag size not the plate size.
 
Last edited:
secretmicrogrow420

secretmicrogrow420

Well-Known Member
just too keep everyone up to date i decided to go with a small H frame press that comes with 6ton jack and is 3ft tall.
also i went with dabpress 3x7 caged plates
in total a 6 ton DIY rosin press cost me 370 dollars
the only thing that worries me is the plates are made for 12-20ton H frame press and my press is 6ton i hope this wont be problem.
i will update this thread when i receive my Shop press / plates :)
6 ton shop press 3 ft tall
dabpress 3x7 caged plates
 
DarkWeb

DarkWeb

Well-Known Member
secretmicrogrow420 said:
just too keep everyone up to date i decided to go with a small H frame press that comes with 6ton jack and is 3ft tall.
also i went with dabpress 3x7 caged plates
in total a 6 ton DIY rosin press cost me 370 dollars
the only thing that worries me is the plates are made for 12-20ton H frame press and my press is 6ton i hope this wont be problem.
i will update this thread when i receive my Shop press / plates :)
6 ton shop press 3 ft tall
dabpress 3x7 caged plates
Click to expand...
As long as the plates fit there should be no problem. I would get a piece of steel, aluminum or wood to cushion the rod that interfaces with the top plate of the cage. This way it doesn't gouge your top plate.
 
secretmicrogrow420

secretmicrogrow420

Well-Known Member
DarkWeb said:
As long as the plates fit there should be no problem. I would get a piece of steel, aluminum or wood to cushion the rod that interfaces with the top plate of the cage. This way it doesn't gouge your top plate.
Click to expand...
With a range of 2.2" to 9.8"
this is what it says and the plates are 5.5inches tall right? so it should fit? :D im pretty sure it will fit!!! so stoked thanksfor your input man!!! also i saw you have apiece of wood for cushioning your top plate?
 
DarkWeb

DarkWeb

Well-Known Member
secretmicrogrow420 said:
With a range of 2.2" to 9.8"
this is what it says and the plates are 5.5inches tall right? so it should fit? :D im pretty sure it will fit!!! so stoked thanksfor your input man!!! also i saw you have apiece of wood for cushioning your top plate?
Click to expand...
Yes cushion and insulation, top and bottom. No need to heat up more metal than the plates.
 
You must log in or register to reply here.
Top